Öz
Objectives: The purpose of this study was tocompare the different types of microorganismaccumulation of polymethylmetacrilate (PMMA)and cobalt chrome (Co-Cr) denture base.Materials and Methods: Disks were preparedat 10 mm diameter and 1.5 mm thickness with heatcured PMMA and CO-Cr alloy (n=10). Candidaalbicansand Staphylococcus epidermidismicroorganisms were investigated in this study.Acrylic resin and metal alloy specimens were keptin microorganism cultures including 5 10colonyfor ml, for 48 hours at 37ºC. After 48 hours thespecimens that were contaminated with microorganisms, were taken off from the tubes andthe microorganisms which were loosely attractedwere removed Specimens were inocubated at 37°Cfor 1 day and colonies were calculated afterinocubation. Statistical analyses were done withKolmogorovSmirnov Z Test and one-wayANOVA (=0.05).Results: Candida albicans colony calculationwere between, 224342 col/ml for acrylicspecimens and 110–176 col/ml for Co-Cr metalalloys.Staphlococcus epidermidiscolonycalculation were between 176–274 col/ml foracrylic specimens and 70-144 col/ml for Co-Crmetal alloys. According the results of the statisticalevaluation, Candida albicans were accumulatedboth acrylic and Co-Cr metal alloys’ test groupspsand this difference was found statisticallysignificant. (=0.05).Conclusion:It should be considered thatcomplete dentures with metal base could be animportant treatment alternative for treatingedentulous patients.Sonuç: Tam dişsiz hastaların tedavisinde, metalkaideli tam protezlerin önemli bir tedavi seçeneğiolabileceği göz önünde bulundurulmalıdır.
Anahtar Kelimeler
Kaynakça
- Phoenix RD. Denture base materials. Dent Clin North Am 1996; 40:113-20.
- Tacir İH, Meşe A, Güzel KG. Fiber ile güçlendirmenin ve farklı polimerizasyon tekniklerinin, iki farklı protez kaide rezinin su emilim miktarına etkisi Cumhuriyet Dent J 2003; 6:2-6
- Çalıkkocaoğlu S. Metal base materials. Complete Dentures. 3rd ed. İstanbul: Academy of
- Prosthodontics and Gnathology Society; 1998. p: 537-54.
- İnan H, Tamam E, Bağış B. Tam protezlerde kullanılan farklı kaide materyallerinin yüzey pürüzlülüğü yönünden in vitro incelenmesi. Selçuk Üniv Dişhek Fak Derg 2008;17(3): 171-6.
- Pamir A, Bağış B, Durkan R, Köroğlu A. Tam protez kaide plağı kırılma nedenlerinin değerlendirilmesi. Cumhuriyet Dent J 2007; 10:10-12
- Kuhar M, Funduk N. Effects of polishing techniques on the surface roughness of acrylic denture base resins. J Prosthet Dent; 2005; 93: 76–85.
- Perezeus LF, Stevensen GC, Flaitz CM, Goldschmidt ME, Engelmeier RL, Nichols CM. The effect of complete dentures with a metal palate on candida species growth in HIV infected patients. J Prosthodont; 2006; 15: 306–315.
- Sonugelen M, Destan Uİ, Lambrecht F, Öztürk B, Karadeniz S. Microbial adherence to a nonprecious alloy after plasma nitriding process. Int J Prosthodont. 2006; 19: 202-204.
- İnan H, Tamam E, Bağış B. Tam protezlerde kullanılan farklı kaide materyallerinin ıslanabilirlik yönünden in-vitro incelenmesi. Türkiye Klinikleri J Dental Sci 2010;16(1):35-43
- Anıl N, Keyf F, Mutlu M. The effect of organic layer formation on the wettability of various prosthetic materials in vitro. HÜ Diş Hek Fak Derg 1996; 20(2): 52-5.
- Ergüven S, Canay Ş, Yuluğ N. Protez stomatitlerinde Candida albicansın rolü. Mikrobiyoloji 1991; 25: 71-79
- Monroy TB, Makdonado VM, Martinez F. Candida albicans, Staphylococcus aureus and Streptococcus mutans colonization in patients wearing dental prosthesis. Med Oral Patol Oral Cir Bucal 2005; 10: E27-E39.
- Yılmaz H, Aydın C, Bal T, Özçelik B. Effects of disinfectants on resilient denture-lining materials contaminated with Staphylococcus aureus, Streptococcus sobrinus, and Candida albicans. Quintessence Int; 2005; 36: 373–381.
- Ohara-Nemoto Y, Haraga H, Kimura S, Nemoto TK. Occurrence of staphylococci in the oral cavities of healthy adults and nasal–oral trafficking of the bacteria. J Med Microb. 2008; 57: 95-99.
- Özdemir H, Marakoğlu İ. Periodontopatojenler. Cumhuriyet Dent J 2004; 7:2-6
- Zissis A, Polyzois A, Yannikakis SA, Harrison A. Roughness of denture materials: A Comparative Study. Int J Prosthodont; 2000; 13: 136–140
- Waters MG, Jagger RG, Polyzois GL. Wettability of silicone rubber maxillofacial prosthetic materials. J Prosthet Dent; 1999; 81: 439-443
- Nassar U, Meyer AE, Ogle RE, Baier RE. The effect of restorative and prosthetic materials on dental plaque. Periodontology 2000. 1995; 8: 114–124.
- Verran J, Maryan CJ. Retention of Candida albicans on acrylic resin and silicone of different surface topography. J Prosthet Dent;1997; 77: 535–9
- Taylor R, Maryan M, Verran J. Retention of oral microorganisms on Cobalt-Chromium alloy and dental acrylic resin with different surface finishes. J Prosthet Dent; 1998; 80: 592–7.
- Atay A. Ağız dokularına Candida albicans yapışması. Atatürk Üniv Diş Hek Fak Derg 2007; 17; 46-50.
- Gürgan S, Alaçam R. Üç farklı yapıdaki kompozit rezin yüzeylerinde bakteri tutunmasının in vitro olarak incelenmesi. H. Ü. Diş Hek. Fak. Derg.. 1986; 13: 58-61.
- Kuhar M, Funfuk N. Effects of polishing techniques on the surface roughness of acrylic denture base resins. J Prosthet Dent; 2005; 93: 76–85.
- Moura JS, Silva J, Pereira T, Cury AD, Garcia RCMR. Influence of acrylic resin polymerization methods and saliva on the adherence of four candida species. J Prosthet Dent; 2006; 96: 205–211.
Öz
ABSTRACT
Objective: The purpose of this study was to compare the different types of microorganism accumulation of polymethylmetacrilate (PMMA) and cobalt chrome (Co-Cr) denture base.
Materials and Methods: Disks were prepared at 10 mm diameter and 1.5 mm thickness with heat cured PMMA and CO-Cr alloy (n=10). Candida albicans and Staphylococcus epidermidis microorganisms were investigated in this study. Acrylic resin and metal alloy specimens were kept in microorganism cultures including 5´ 10-6 colony for ml, for 48 hours at 37ºC. After 48 hours the specimens that were contaminated with microorganisms, were taken off from the tubes and the microorganisms which were loosely attracted were removed Specimens were inocubated at 37°C for 1 day and colonies were calculated after inocubation. Statistical analyses were done with Kolmogorov- Smirnov Z Test and one-way ANOVA (a=0.05).
Results: Candida albicans colony calculation were between, 224- 342 col/ml for acrylic specimens and 110–176 col/ml for Co-Cr metal alloys. Staphlococcus epidermidis colony calculation were between 176–274 col/ml for acrylic specimens and 70-144 col/ml for Co-Cr metal alloys. According the results of the statistical evaluation, Candida albicans were accumulated both acrylic and Co-Cr metal alloys’ test groupsps and this difference was found statistically significant. (a=0.05).
Conclusion: It should be considered that complete dentures with metal base could be an important treatment alternative for treating edentulous patients.
Anahtar Kelimeler
Kaynakça
- Phoenix RD. Denture base materials. Dent Clin North Am 1996; 40:113-20.
- Tacir İH, Meşe A, Güzel KG. Fiber ile güçlendirmenin ve farklı polimerizasyon tekniklerinin, iki farklı protez kaide rezinin su emilim miktarına etkisi Cumhuriyet Dent J 2003; 6:2-6
- Çalıkkocaoğlu S. Metal base materials. Complete Dentures. 3rd ed. İstanbul: Academy of
- Prosthodontics and Gnathology Society; 1998. p: 537-54.
- İnan H, Tamam E, Bağış B. Tam protezlerde kullanılan farklı kaide materyallerinin yüzey pürüzlülüğü yönünden in vitro incelenmesi. Selçuk Üniv Dişhek Fak Derg 2008;17(3): 171-6.
- Pamir A, Bağış B, Durkan R, Köroğlu A. Tam protez kaide plağı kırılma nedenlerinin değerlendirilmesi. Cumhuriyet Dent J 2007; 10:10-12
- Kuhar M, Funduk N. Effects of polishing techniques on the surface roughness of acrylic denture base resins. J Prosthet Dent; 2005; 93: 76–85.
- Perezeus LF, Stevensen GC, Flaitz CM, Goldschmidt ME, Engelmeier RL, Nichols CM. The effect of complete dentures with a metal palate on candida species growth in HIV infected patients. J Prosthodont; 2006; 15: 306–315.
- Sonugelen M, Destan Uİ, Lambrecht F, Öztürk B, Karadeniz S. Microbial adherence to a nonprecious alloy after plasma nitriding process. Int J Prosthodont. 2006; 19: 202-204.
- İnan H, Tamam E, Bağış B. Tam protezlerde kullanılan farklı kaide materyallerinin ıslanabilirlik yönünden in-vitro incelenmesi. Türkiye Klinikleri J Dental Sci 2010;16(1):35-43
- Anıl N, Keyf F, Mutlu M. The effect of organic layer formation on the wettability of various prosthetic materials in vitro. HÜ Diş Hek Fak Derg 1996; 20(2): 52-5.
- Ergüven S, Canay Ş, Yuluğ N. Protez stomatitlerinde Candida albicansın rolü. Mikrobiyoloji 1991; 25: 71-79
- Monroy TB, Makdonado VM, Martinez F. Candida albicans, Staphylococcus aureus and Streptococcus mutans colonization in patients wearing dental prosthesis. Med Oral Patol Oral Cir Bucal 2005; 10: E27-E39.
- Yılmaz H, Aydın C, Bal T, Özçelik B. Effects of disinfectants on resilient denture-lining materials contaminated with Staphylococcus aureus, Streptococcus sobrinus, and Candida albicans. Quintessence Int; 2005; 36: 373–381.
- Ohara-Nemoto Y, Haraga H, Kimura S, Nemoto TK. Occurrence of staphylococci in the oral cavities of healthy adults and nasal–oral trafficking of the bacteria. J Med Microb. 2008; 57: 95-99.
- Özdemir H, Marakoğlu İ. Periodontopatojenler. Cumhuriyet Dent J 2004; 7:2-6
- Zissis A, Polyzois A, Yannikakis SA, Harrison A. Roughness of denture materials: A Comparative Study. Int J Prosthodont; 2000; 13: 136–140
- Waters MG, Jagger RG, Polyzois GL. Wettability of silicone rubber maxillofacial prosthetic materials. J Prosthet Dent; 1999; 81: 439-443
- Nassar U, Meyer AE, Ogle RE, Baier RE. The effect of restorative and prosthetic materials on dental plaque. Periodontology 2000. 1995; 8: 114–124.
- Verran J, Maryan CJ. Retention of Candida albicans on acrylic resin and silicone of different surface topography. J Prosthet Dent;1997; 77: 535–9
- Taylor R, Maryan M, Verran J. Retention of oral microorganisms on Cobalt-Chromium alloy and dental acrylic resin with different surface finishes. J Prosthet Dent; 1998; 80: 592–7.
- Atay A. Ağız dokularına Candida albicans yapışması. Atatürk Üniv Diş Hek Fak Derg 2007; 17; 46-50.
- Gürgan S, Alaçam R. Üç farklı yapıdaki kompozit rezin yüzeylerinde bakteri tutunmasının in vitro olarak incelenmesi. H. Ü. Diş Hek. Fak. Derg.. 1986; 13: 58-61.
- Kuhar M, Funfuk N. Effects of polishing techniques on the surface roughness of acrylic denture base resins. J Prosthet Dent; 2005; 93: 76–85.
- Moura JS, Silva J, Pereira T, Cury AD, Garcia RCMR. Influence of acrylic resin polymerization methods and saliva on the adherence of four candida species. J Prosthet Dent; 2006; 96: 205–211.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Bölüm | Original Research Articles |
| Yazarlar | |
| Yayımlanma Tarihi | 2 Mayıs 2014 |
| Gönderilme Tarihi | 4 Eylül 2013 |
| Yayımlandığı Sayı | Yıl 2014 |
Cited By
AKRİLİK KAİDEYE İLAVE EDİLEN GÜÇLENDİRME MATERYALLERİNİN MİKROORGANİZMA TUTULUMUNA ETKİSİNİN İNCELENMESİ
Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
Firas SÜLEYMAN
https://doi.org/10.17567/ataunidfd.443436
Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.
CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.
Frequency: Four times a year (March, June, September, and December)
IMPORTANT NOTICE
All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.
Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.