BibTex RIS Cite

Can Er:YAG laser be an alternative to conventional methods for repairing composite resins?

Year 2013, , 125 - 132, 01.05.2013

Digdem Eren , Özden Bektaş , Şeyda Siso

https://doi.org/10.7126/cdj.2013.1787
Cited By: 3

Abstract

Abstract

Objective: The aim of this study was to compare the effect of four different surface treatments on the repair bond strength of aged composite resin by employing the micro-shear test.

Materials and Method: Forty-eight composite blocks were prepared. All samples were thermocycled for 1000 cycles between (5±2) and (55±2) ◦C with a dwell time of 30 s and a transfer time of 5 s. The samples were randomly divided into four groups and were subjected to the following treatments (n=12): Group 1 - phosphoric acid; Group 2 - diamond bur ; Group 3 - diamond bur+ phosphoric acid; Group 4 - Er:YAG Laser. After the aging procedure, fresh microhybrid resin composite was bonded to the treated surfaces with an etch and rinse adhesive resin. The repair bond strength of each sample was determined using a micro-shear bond strength test. All data were analyzed using the Kruskal Wallis test.

Results: There were no significant differences among samples in the four groups.

Conclusion: Based on the results of this study, each of the four surface treatment methods produced sufficient repair bond strength.

Clinical Relevance: A proper bonding must be created between the existing aged composite and the new one for successful repair.

Key Words: Repair bond strength, composite resin, Er:YAG laser, micro-shear

Keywords

Repair bond strength composite resin Er:YAG laser micro-shear

References

  • 1. Foitzik M, Attin T. Korrekturfüllung—Möglichkeiten und Durchführung. Schweiz Monatsschr Zahnmed 2004;114:1003–1011.
  • 2. Padipatvuthikul P, Mair LH. Bonding of composite to water aged composite with surface treatments. Dent Mater 2007;23:519–525.
  • 3. Tezvergil A, Lassila LVJ, Vallittu PK. Composite–composite repair bond strength: effect of different adhesion primers. J Dent 2003;31:521–525.
  • 4. Vanckerckoven H, Lambrechts P, Van Beylen M, Davidson CL, Vanherle G. Unreacted methacrylate groups on the surfaces of composite resins. J Dent Res 1982;61:791–795.
  • 5. Rathke A, Tymina Y, Haller B. Effect of different surface treatments on the composite–composite repair bond strength. Clin Oral Invest 2009;13:317–323.
  • 6. Papacchini F, Dall’Oca S, Chieffi N, Goracci C, Sadek FT, Suh BI, Tay FR, Ferrari M. Composite-to- composite microtensile bond strength in the repair of microfilled hybrid resin; effect of surface treatment and oxygen inhibition. J Adhes Dent 2007;9: 25-31.
  • 7. Bonstein T, Garlapo D, Donarummo JJr, Bush PJ. Evaluation of varied repair protocols applied to aged composite resin. J Adhes Dent 2005;7:41-49.
  • 8. Fawzy AS, El-Askary FS, Amer MA. Effect of surface treatments on the tensile bond strength of repaired water-aged anterior restorative micro-fine hybrid resin composite. J Dent 2008;36:969-976.
  • 9. Cesar PF, Meyer Faara PM, Miwa Caldart R, Gastaldoni Jaeger R, da Cunha Ribeiro F. Tensile bond strength of composite repairs on Artglass using different surface treatments. Am J Dent 2001;14:373- 377.
  • 10. Passos SP, Ozcan M, Vanderlei AD, Leite FP, Kimpara ET, Bottino MA. Bond strength durability of direct and indirect composite systems following surface conditioning for repair. J Adhes Dent 2007;9:443- 447.,
  • 11. Rossato DM, Bandéca MC, Saade EG, Lizarelli RFZ, Bagnato VS, Saad JRC. Influence of Er:YAG laser on surface treatment of aged composite resin to repair restoration. Laser Physics 2009;19:2144-2149.
  • 12. Bader C, Krejci I. Indications and limitations of Er:YAG laser applications in dentistry. Am J Dent 2006;19:178-186.
  • 13. Li J. Effects of surface properties on bond strength between layers of newly cured dental composites. J Oral Rehabil 1997;24:358–360.
  • 14. Kupiec KA, Barkmeier WW. Laboratory evaluation of surface treatments for composite repair. Oper Dent 1996;21:59–62.
  • 15. Ozcan M, Barbosa SH, Melo RM, Galhano GA, Bottino MA. Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions. Dent Mater 2007;23:1276–1282.
  • 16. Söderholm KJ, Roberts MJ. Variables influencing the repair strength of dental composites. Scand J Dent Res 1991;99:173–180.
  • 17. Yap AU, Sau CW, Lye KW. Effects of aging on repair bond strengths of a polyacid-modified composite resin. Oper Dent 1999;24:371–376.
  • 18. Crim GA, Garcia-Godoy F. Microleakage: the effect of storage and cycling duration. J Prost Dent 1987;57:574–576
  • 19. Trajtenberg CP, Powers JM. Bond strengths of repaired laboratory composites using three surface treatments and three primers. Am J Dent 2004;17:123-126.
  • 20. Bouschlicher MR, Cobb DS, Vargas MA. Effect of two abrasive systems on resin bonding to laboratory- processed indirect resin composite restorations. J Esthet Dent 1999;11:185-196.
  • 21. Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 1997;77:122-126.
  • 22. Shahdad SA, Kennedy JG. Bond strength of repaired anterior composite resins: an in vitro study. J Dent 1998;26:685-694.
  • 23. Gregory WA, Pounder B, Bakus E. Bond strengths of chemically dissimilar repaired composite resins. J Prosthet Dent 1990;64:664-668.
  • 24. Rinastiti M, Ozcan M, Siswomihardjo W, Busscher HJ () Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig 2011;15:625-33.
  • 25. Sano H, Shono T, Sonoda H, Takatsu T, Ciucchi B, Carvalho R, Pashley DH. Relationship between surface area for adhesion and tensile bond strength – evaluation of a microtensile bond test. Dent Mater 1994;10:236–240.
  • 26. Swift EJ Jr, LeValley BD, Boyer DB. Evaluation of new methods for composite repair. Dent Mater 1992;8:362–365.
  • 27. Swift EJ Jr, Cloe BC, Boyer DB. Effect of a silane coupling agent on composite repair strengths. Am J Dent 1994;7:200–202.
  • 28. Kula K, Nelson S, Kula T, Thompson V. In vitro effect of acidulated phosphate fluoride gel on the surface of composites with different filler particles. J Prosthet Dent 1986;56:161-169.
  • 29. Yesilyurt C, Kusgoz A, Bayram M, Ulker MJ. Initial repair bond strength of a nano-filled hybrid resin: effect of surface treatments and bonding agents. Esthet Restor Dent 2009;21:251-260.
  • 30. Bouschlicher MR, Reinhardt JW, Vargas MA. Surface treatment techniques for resin composite repair. Am J Dent 1997;10:279-283
  • 31. Kimyai S, Mohammadi N, Navimipour EJ, Rikhtegaran S. Comparison of the effect of three mechanical surface treatments on the repair bond strength of a laboratory composite. Photomed Laser Surg 2010; 28 Suppl 2:S25-30.
  • 32. Hannig C, Laubach S, Hahn P, Attin T. Shear bond strength of repaired adhesive filling materials using different repair procedures. J Adhes Dent 2006;8:35-40.
  • 33. Lizarelli RF, Moriyama LT, Bagnato VS. Ablation of composite resins using Er:YAG laser--comparison with enamel and dentin. Lasers Surg Med 2003;33:132-139.
  • 34. Akova T, Yoldas O, Toroglu MS, Uysal H. Porcelain surface treatment by laser for bracket-porcelain bonding. Am J Orthod Dentofacial Orthop 2005;128:630–637.
  • 35. Shiu P, De Souza-Zaroni WC, Eduardo C de P, Youssef MN. Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed Laser Surg 2007;25:291–296.
  • 36. Gokce B, Ozpinar B, Dundar M, Comlekoglu E, Sen BH, Gungor MA. Bond strengths of all-ceramics: acid vs laser etching. Oper Dent 2007;32:173–178.
  • 37. Burnett LH Jr, Shinkai RS, and Eduardo Cde P. Tensile bond strength of a one-bottle adhesive system to indirect composites treated with Er:YAG laser, air abrasion, or fluoridric acid. Photomed Laser Surg 2004;22:351-356.
  • 38. Eduardo Cde P, Bello-Silva MS, Moretto SG, Cesar PF, de Freitas PM. Microtensile bond strength of composite resin to glass-infiltrated alumina composite conditioned with Er,Cr:YSGG laser. Lasers Med Sci 2012;27:7-14.
  • 39. Powers JM, Pratten DH, Collard SM, Cowperthwaite GF. Spreading of oligomers on polymers. Dent Mater 1991;7:88-91.

Year 2013, , 125 - 132, 01.05.2013

Digdem Eren , Özden Bektaş , Şeyda Siso

https://doi.org/10.7126/cdj.2013.1787
Cited By: 3

Abstract

References

  • 1. Foitzik M, Attin T. Korrekturfüllung—Möglichkeiten und Durchführung. Schweiz Monatsschr Zahnmed 2004;114:1003–1011.
  • 2. Padipatvuthikul P, Mair LH. Bonding of composite to water aged composite with surface treatments. Dent Mater 2007;23:519–525.
  • 3. Tezvergil A, Lassila LVJ, Vallittu PK. Composite–composite repair bond strength: effect of different adhesion primers. J Dent 2003;31:521–525.
  • 4. Vanckerckoven H, Lambrechts P, Van Beylen M, Davidson CL, Vanherle G. Unreacted methacrylate groups on the surfaces of composite resins. J Dent Res 1982;61:791–795.
  • 5. Rathke A, Tymina Y, Haller B. Effect of different surface treatments on the composite–composite repair bond strength. Clin Oral Invest 2009;13:317–323.
  • 6. Papacchini F, Dall’Oca S, Chieffi N, Goracci C, Sadek FT, Suh BI, Tay FR, Ferrari M. Composite-to- composite microtensile bond strength in the repair of microfilled hybrid resin; effect of surface treatment and oxygen inhibition. J Adhes Dent 2007;9: 25-31.
  • 7. Bonstein T, Garlapo D, Donarummo JJr, Bush PJ. Evaluation of varied repair protocols applied to aged composite resin. J Adhes Dent 2005;7:41-49.
  • 8. Fawzy AS, El-Askary FS, Amer MA. Effect of surface treatments on the tensile bond strength of repaired water-aged anterior restorative micro-fine hybrid resin composite. J Dent 2008;36:969-976.
  • 9. Cesar PF, Meyer Faara PM, Miwa Caldart R, Gastaldoni Jaeger R, da Cunha Ribeiro F. Tensile bond strength of composite repairs on Artglass using different surface treatments. Am J Dent 2001;14:373- 377.
  • 10. Passos SP, Ozcan M, Vanderlei AD, Leite FP, Kimpara ET, Bottino MA. Bond strength durability of direct and indirect composite systems following surface conditioning for repair. J Adhes Dent 2007;9:443- 447.,
  • 11. Rossato DM, Bandéca MC, Saade EG, Lizarelli RFZ, Bagnato VS, Saad JRC. Influence of Er:YAG laser on surface treatment of aged composite resin to repair restoration. Laser Physics 2009;19:2144-2149.
  • 12. Bader C, Krejci I. Indications and limitations of Er:YAG laser applications in dentistry. Am J Dent 2006;19:178-186.
  • 13. Li J. Effects of surface properties on bond strength between layers of newly cured dental composites. J Oral Rehabil 1997;24:358–360.
  • 14. Kupiec KA, Barkmeier WW. Laboratory evaluation of surface treatments for composite repair. Oper Dent 1996;21:59–62.
  • 15. Ozcan M, Barbosa SH, Melo RM, Galhano GA, Bottino MA. Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions. Dent Mater 2007;23:1276–1282.
  • 16. Söderholm KJ, Roberts MJ. Variables influencing the repair strength of dental composites. Scand J Dent Res 1991;99:173–180.
  • 17. Yap AU, Sau CW, Lye KW. Effects of aging on repair bond strengths of a polyacid-modified composite resin. Oper Dent 1999;24:371–376.
  • 18. Crim GA, Garcia-Godoy F. Microleakage: the effect of storage and cycling duration. J Prost Dent 1987;57:574–576
  • 19. Trajtenberg CP, Powers JM. Bond strengths of repaired laboratory composites using three surface treatments and three primers. Am J Dent 2004;17:123-126.
  • 20. Bouschlicher MR, Cobb DS, Vargas MA. Effect of two abrasive systems on resin bonding to laboratory- processed indirect resin composite restorations. J Esthet Dent 1999;11:185-196.
  • 21. Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 1997;77:122-126.
  • 22. Shahdad SA, Kennedy JG. Bond strength of repaired anterior composite resins: an in vitro study. J Dent 1998;26:685-694.
  • 23. Gregory WA, Pounder B, Bakus E. Bond strengths of chemically dissimilar repaired composite resins. J Prosthet Dent 1990;64:664-668.
  • 24. Rinastiti M, Ozcan M, Siswomihardjo W, Busscher HJ () Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig 2011;15:625-33.
  • 25. Sano H, Shono T, Sonoda H, Takatsu T, Ciucchi B, Carvalho R, Pashley DH. Relationship between surface area for adhesion and tensile bond strength – evaluation of a microtensile bond test. Dent Mater 1994;10:236–240.
  • 26. Swift EJ Jr, LeValley BD, Boyer DB. Evaluation of new methods for composite repair. Dent Mater 1992;8:362–365.
  • 27. Swift EJ Jr, Cloe BC, Boyer DB. Effect of a silane coupling agent on composite repair strengths. Am J Dent 1994;7:200–202.
  • 28. Kula K, Nelson S, Kula T, Thompson V. In vitro effect of acidulated phosphate fluoride gel on the surface of composites with different filler particles. J Prosthet Dent 1986;56:161-169.
  • 29. Yesilyurt C, Kusgoz A, Bayram M, Ulker MJ. Initial repair bond strength of a nano-filled hybrid resin: effect of surface treatments and bonding agents. Esthet Restor Dent 2009;21:251-260.
  • 30. Bouschlicher MR, Reinhardt JW, Vargas MA. Surface treatment techniques for resin composite repair. Am J Dent 1997;10:279-283
  • 31. Kimyai S, Mohammadi N, Navimipour EJ, Rikhtegaran S. Comparison of the effect of three mechanical surface treatments on the repair bond strength of a laboratory composite. Photomed Laser Surg 2010; 28 Suppl 2:S25-30.
  • 32. Hannig C, Laubach S, Hahn P, Attin T. Shear bond strength of repaired adhesive filling materials using different repair procedures. J Adhes Dent 2006;8:35-40.
  • 33. Lizarelli RF, Moriyama LT, Bagnato VS. Ablation of composite resins using Er:YAG laser--comparison with enamel and dentin. Lasers Surg Med 2003;33:132-139.
  • 34. Akova T, Yoldas O, Toroglu MS, Uysal H. Porcelain surface treatment by laser for bracket-porcelain bonding. Am J Orthod Dentofacial Orthop 2005;128:630–637.
  • 35. Shiu P, De Souza-Zaroni WC, Eduardo C de P, Youssef MN. Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed Laser Surg 2007;25:291–296.
  • 36. Gokce B, Ozpinar B, Dundar M, Comlekoglu E, Sen BH, Gungor MA. Bond strengths of all-ceramics: acid vs laser etching. Oper Dent 2007;32:173–178.
  • 37. Burnett LH Jr, Shinkai RS, and Eduardo Cde P. Tensile bond strength of a one-bottle adhesive system to indirect composites treated with Er:YAG laser, air abrasion, or fluoridric acid. Photomed Laser Surg 2004;22:351-356.
  • 38. Eduardo Cde P, Bello-Silva MS, Moretto SG, Cesar PF, de Freitas PM. Microtensile bond strength of composite resin to glass-infiltrated alumina composite conditioned with Er,Cr:YSGG laser. Lasers Med Sci 2012;27:7-14.
  • 39. Powers JM, Pratten DH, Collard SM, Cowperthwaite GF. Spreading of oligomers on polymers. Dent Mater 1991;7:88-91.
There are 39 citations in total.

Details

Primary Language English
Journal Section Original Research Articles
Authors

Digdem Eren

Özden Bektaş

Şeyda Siso

Publication Date May 1, 2013
Submission Date October 16, 2012
Published in Issue Year 2013

Cite

EndNote Eren D, Bektaş Ö, Siso Ş (May 1, 2013) Can Er:YAG laser be an alternative to conventional methods for repairing composite resins?. Cumhuriyet Dental Journal 16 2 125–132.

Cited By

Influence of different cavity disinfection solutions and laser systems on repair bond strength of silorane based composite
Cumhuriyet Dental Journal
Feridun HÜRMÜZLÜ
https://doi.org/10.7126/cumudj.910642
BİR NANOHİBRİT KOMPOZİTİN TAMİRİNDE KULLANILAN FARKLI YÜZEY İŞLEMLERİ VE KOMPOZİT REZİNLERİN MİKROSIZINTIYA ETKİSİ
Cumhuriyet Dental Journal
Digdem Eren
https://doi.org/10.7126/cumudj.449364
Effect of Different Surface Treatments and Roughness on the Repair Bond Strength of Aged Nanohybrid Composite
Photobiomodulation, Photomedicine, and Laser Surgery
Diğdem Eren
https://doi.org/10.1089/photob.2018.4585

Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.


CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.

Frequency: Four times a year (March, June, September, and December)

IMPORTANT NOTICE

All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.

Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.