Evaluation of Temperature Changes in the Pulpal Chamber of the Primary Tooth During Curing of Colored Compomers
Abstract
Purpose: To
investigate the temperature changes in the primary teeth pulp chambers during
the curing of different colored compomers
Methods:
Five extracted primary mandibular second molars were prepared with class II
cavities. Gold, blue, green, berry, and tooth (control group) colored compomers
were tested in two steps (aproximal and occlusal). Measurement of pulp chamber
temperature changes during curing was performed with a J type thermocouple. The
data including differences between the highest and initial temperature values
were recorded and analyzed by two-way ANOVA and Mann-Whitney U tests
Results:
There
were statistically significant differences temperature changes in groups (p<
0.05). Gold colored compomer showed the highest temperature increase in both
proximal and occlusal surfaces. Tooth colored compomer(A2) showed the lower
temperature increase. The temperature increase in aproximal cavities was found
to be higher than the temperature increase in occlusal cavities.
Conclusions:
Colored
compomer can be an alternative restorative materials in superficial class I and
II cavities in primary teeth. Dark coloured compomers should be used in deep
cavities.
Keywords
References
- 1- Kramer N, Frankenberger R. Compomers in restorative therapy of children: A literature review. Int J Paediatr Dent 17(1):2-9,2007.
- 2- Mail P, Deshpand S, Single A. Microleakage of restorative materials: an in vitro study. J Indian Socpedoprev Dent. 24(1):15–8,2006.
- 3- McLean JW, Nicholson JW, Wilson AD. Proposed nomenclature for glass-ionomer dental cements and related materials. Quintessence Int 25(9):587-589,1994.
- 4- Croll TP, Helpin ML, Donly KJ. Multi-colored dual-cured compomer. Pediatr Dent 26(3):273-276,2004.
- 5- Atabek D, Bodur H, Kalayci S, Baygin O, Tirali E. Conversion degrees of a colored compomer in different colors utilized by various curing times. J Dent Child (Chic) 78(2):83-87,2011.
- 6- Hubbezoglu I, Unal M, Zan R, Hurmuzlu F. Temperature rises during application of er:Yag laser under different primary dentin thicknesses. Photomed Laser Surg 31(5):201-05,2013.
- 7- Oberholzer TG, Makofane ME, du Preez IC, George R, 2012. Modern high powered led curing lights and their effect on pulp chamber temperature of bulk and incrementally cured composite resin. Eur J Prosthodont Restor Dent 20(2): 50,2012.
- 8- Soh MS, Yap AU, Siow KS. The effectiveness of cure of LED and halogen curing lights at varying cavity depths. Oper Dent 28:707-15,2003.
- 9- Aksakallı S, Demir A, Selek M, Taşdemir S. Temperature increase during orthodontic bonding with different curing units using an infrared camera. Acta Odontol Scand 72(1):36-41,2014.
- 10- Lefkowitz W, Robinson HBG, Postle HH. Pulpal response to cavity preparation. J Prosthet Dent 8:315-24,1958.
- 11- Smail SRJ, Patterson CJW, Mclundie AC. In vitro temperature rises during visible-light curing of a lining material and a posterior composite. J Oral Rehabil 15:361-66,1988.
- 12- Bouillaguet S, Caillot G, Forchelet J, Cattani-Lorente M, Wataha JC, Krejci L. Thermal risks from LED-and high-intensity QTH-curing units during polymerization of dental resins. J Biomed Mater Res B Appl Biomater, 72(2): 260-67,2005.
- 13- Sari T, Celik G, Usumez A. Temperature rise in pulp and gel during laser-activated bleaching: In vitro. Lasers Med Sci 30(2):577-82,2015.
- 14- Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 19:515-30,1965.
- 15- Hwang SW, Kwon TY, Kim KH, Kwon YH, Kim HI, Lee JB. Optical, mechanical, and chemical properties of colored compomer. Biomed Res 11:36-42,2007.
- 16- Avşar A,Tuloglu N. Effect of different topical fluoride applications on the surface roughness of a colored compomer. J Appl Oral Sci 18(2):171-77,2010.
- 17- Croll TP, Helpin ML, Donly KJ. Multi-colored dual-cured compomer. Pediatr Dent 26(3):273-76,2004.
- 18- Arora V, Arora P, Srivastava N, Togoo RA. Multicoloured Restorations for Pediatric Dental Patients. Bri J Appl Sci Tech 4(28): 4014,2014.
- 19- Vandenbulcke JD, Marks LA, Martens LC, Verbeeck, RM. Comparison of curing depth of a colored polyacid-modified composite resin with different light-curing units. Quintessence Int 41(9):87-94,2010.
- 20- Guler C,Keles A, Guler MS, Karagoz S, Cora ON, Keskin G. Thermal conductivity of different colored compomers. J Appl Biomater Funct Mater 2017 doi: 10.5301/jabfm.5000349.
- 21- Yan LJ, Chang P, Tian RH. A comprehensive evaluation of application of light-cured colored compomer for deciduous teeth. J Biol Regul Homeost Agents 31(2): 439-45,2017.
- 22- Savaş S, Botsalı MS, Küçükyılmaz E, Sarı T. Evaluation of temperature changes in the pulp chamber during polymerization of light- cured pulp- capping materials by using a VALO LED light curing unit at different curing distances. Dent Mater 33(6): 764-69,2014.
- 23- Al-Qudah AA, Mitchell CA, Biagioni PA, Hussey DL. Thermographic investigation of contemporary resin-containing dental materials. J Dent 33:593-02,2005.
- 24- Tosun G,Usumez A, Yondem I, Sener Y. Temperature rise under normal and caries- affected primary tooth dentin disks during polymerization of adhesives and resin-containing dental materials. Dent Mater 7(3): 466-70,2008.
- 25- Kahvecioglu F, Tosun G, Ulker HE. Intrapulpal Thermal Changes during Setting Reaction of Glass Carbomer® Using Thermocure Lamp. BioMed Res Int 2016 doi: 10.1155/2016/5173805.
- 26- Khodadadi, E, Soraya K, Mahdiyeh A. Comparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units. Electron Physician 8(5):2355-60,2016.
- 27- Cagidiaco MC, Ferrari M, Vichi A, Davidson CL. Mapping of tubule and intertubule surface areas available for bonding in Class V and Class II preparations. J Dent, 25(5):379-89,1997.
Abstract
References
- 1- Kramer N, Frankenberger R. Compomers in restorative therapy of children: A literature review. Int J Paediatr Dent 17(1):2-9,2007.
- 2- Mail P, Deshpand S, Single A. Microleakage of restorative materials: an in vitro study. J Indian Socpedoprev Dent. 24(1):15–8,2006.
- 3- McLean JW, Nicholson JW, Wilson AD. Proposed nomenclature for glass-ionomer dental cements and related materials. Quintessence Int 25(9):587-589,1994.
- 4- Croll TP, Helpin ML, Donly KJ. Multi-colored dual-cured compomer. Pediatr Dent 26(3):273-276,2004.
- 5- Atabek D, Bodur H, Kalayci S, Baygin O, Tirali E. Conversion degrees of a colored compomer in different colors utilized by various curing times. J Dent Child (Chic) 78(2):83-87,2011.
- 6- Hubbezoglu I, Unal M, Zan R, Hurmuzlu F. Temperature rises during application of er:Yag laser under different primary dentin thicknesses. Photomed Laser Surg 31(5):201-05,2013.
- 7- Oberholzer TG, Makofane ME, du Preez IC, George R, 2012. Modern high powered led curing lights and their effect on pulp chamber temperature of bulk and incrementally cured composite resin. Eur J Prosthodont Restor Dent 20(2): 50,2012.
- 8- Soh MS, Yap AU, Siow KS. The effectiveness of cure of LED and halogen curing lights at varying cavity depths. Oper Dent 28:707-15,2003.
- 9- Aksakallı S, Demir A, Selek M, Taşdemir S. Temperature increase during orthodontic bonding with different curing units using an infrared camera. Acta Odontol Scand 72(1):36-41,2014.
- 10- Lefkowitz W, Robinson HBG, Postle HH. Pulpal response to cavity preparation. J Prosthet Dent 8:315-24,1958.
- 11- Smail SRJ, Patterson CJW, Mclundie AC. In vitro temperature rises during visible-light curing of a lining material and a posterior composite. J Oral Rehabil 15:361-66,1988.
- 12- Bouillaguet S, Caillot G, Forchelet J, Cattani-Lorente M, Wataha JC, Krejci L. Thermal risks from LED-and high-intensity QTH-curing units during polymerization of dental resins. J Biomed Mater Res B Appl Biomater, 72(2): 260-67,2005.
- 13- Sari T, Celik G, Usumez A. Temperature rise in pulp and gel during laser-activated bleaching: In vitro. Lasers Med Sci 30(2):577-82,2015.
- 14- Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 19:515-30,1965.
- 15- Hwang SW, Kwon TY, Kim KH, Kwon YH, Kim HI, Lee JB. Optical, mechanical, and chemical properties of colored compomer. Biomed Res 11:36-42,2007.
- 16- Avşar A,Tuloglu N. Effect of different topical fluoride applications on the surface roughness of a colored compomer. J Appl Oral Sci 18(2):171-77,2010.
- 17- Croll TP, Helpin ML, Donly KJ. Multi-colored dual-cured compomer. Pediatr Dent 26(3):273-76,2004.
- 18- Arora V, Arora P, Srivastava N, Togoo RA. Multicoloured Restorations for Pediatric Dental Patients. Bri J Appl Sci Tech 4(28): 4014,2014.
- 19- Vandenbulcke JD, Marks LA, Martens LC, Verbeeck, RM. Comparison of curing depth of a colored polyacid-modified composite resin with different light-curing units. Quintessence Int 41(9):87-94,2010.
- 20- Guler C,Keles A, Guler MS, Karagoz S, Cora ON, Keskin G. Thermal conductivity of different colored compomers. J Appl Biomater Funct Mater 2017 doi: 10.5301/jabfm.5000349.
- 21- Yan LJ, Chang P, Tian RH. A comprehensive evaluation of application of light-cured colored compomer for deciduous teeth. J Biol Regul Homeost Agents 31(2): 439-45,2017.
- 22- Savaş S, Botsalı MS, Küçükyılmaz E, Sarı T. Evaluation of temperature changes in the pulp chamber during polymerization of light- cured pulp- capping materials by using a VALO LED light curing unit at different curing distances. Dent Mater 33(6): 764-69,2014.
- 23- Al-Qudah AA, Mitchell CA, Biagioni PA, Hussey DL. Thermographic investigation of contemporary resin-containing dental materials. J Dent 33:593-02,2005.
- 24- Tosun G,Usumez A, Yondem I, Sener Y. Temperature rise under normal and caries- affected primary tooth dentin disks during polymerization of adhesives and resin-containing dental materials. Dent Mater 7(3): 466-70,2008.
- 25- Kahvecioglu F, Tosun G, Ulker HE. Intrapulpal Thermal Changes during Setting Reaction of Glass Carbomer® Using Thermocure Lamp. BioMed Res Int 2016 doi: 10.1155/2016/5173805.
- 26- Khodadadi, E, Soraya K, Mahdiyeh A. Comparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units. Electron Physician 8(5):2355-60,2016.
- 27- Cagidiaco MC, Ferrari M, Vichi A, Davidson CL. Mapping of tubule and intertubule surface areas available for bonding in Class V and Class II preparations. J Dent, 25(5):379-89,1997.
Details
| Primary Language | English |
|---|---|
| Subjects | Health Care Administration |
| Journal Section | Original Research Articles |
| Authors | |
| Publication Date | July 29, 2018 |
| Submission Date | March 7, 2018 |
| Published in Issue | Year 2018 |
Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.
CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.
Frequency: Four times a year (March, June, September, and December)
IMPORTANT NOTICE
All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.
Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.