Staining susceptibility of dental composite resins with various nano-filler technologies

Sakshi Sachdeva; Subhashish Das; Aasadur Midday; Manuel Thomas; Prashanthi Madhyastha

doi:10.7126/cumudj.957975

EN

Staining susceptibility of dental composite resins with various nano-filler technologies

Abstract

Background: Discoloration of dental composite restoration is a common problem that usually results in refurbishing or replacement or even removal of the restoration. Objective: The purpose of this study was to evaluate the color stability of polished composite resin material with different filler technologies. Methodology: Three composites were studied; Filtek™ Z350 XT (3M, ESPE, St. Paul, USA) [Group-I] that has nano-cluster filler particles, Brilliant EverGlow™ (Coltene/Whaledent® AG, Altstatten, Switzerland) [Group-II] which consists of submicron barium glass fillers and pre-polymerized fillers and Ceram.X® Sphere TEC™ (Dentsply, Konstanz, Germany) [Group-III] with advanced granulated filler technology composite. Twenty standardized composite discs were prepared with each composite resin, and it was polished with Sof-Lex disks (3M, ESPE, St. Paul, USA). The baseline color was then recorded using a spectrophotometer (X-Rite PANTONE® iPro-2, Michigan). Eight samples from each group were then subdivided and immersed into freshly prepared solutions of turmeric, coffee, and four samples into distilled water for a total period of 3 hours/day for 30 days. Following this, the color was again recorded. Statistical analysis: The change in color (ΔE) was calculated, and the data obtained were subjected to Kruskal Wallis and Mann Whitney test. Results: A significant difference was seen between the staining characteristics of Group-III and Group-I (p<0.05). The mean color change in the values was highest in Ceram.X that was clinically unacceptable (ΔE>3.3). Conclusion: Though all composites revealed color changes after their immersion into the staining solutions, the amount of stain varied based on their constituents and filler characteristics.

Keywords

References

1. Malhotra N, Shenoy RP, Acharya S, Shenoy R, Mayya S. Effect of three indigenous food stains on resin-based, microhybrid, and nanocomposites. J Esthet Restor Dent. 2011; 23(4): 250- 257.
2. Gönülol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent. 2012;40 Suppl 2: e64‐e70.
3. Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent. 2006; 95(2): 137‐142.
4. Guler AU, Kurt S, Kulunk T. Effects of various finishing procedures on the staining of provisional restorative materials. J Prosthet Dent. 2005; 93(5): 453‐458.
5. Kroeze HJ, Plasschaert AJ, van 't Hof MA, Truin GJ. Prevalence and need for replacement of amalgam and composite restorations in Dutch adults. J Dent Res. 1990; 69(6): 1270‐1274.
6. Mitra SB, Sakaguchi RL. Restorative materials- composite and polymers. In. Sakaguchi Rl, Powers JM, eds. Craig’s Restorative Dental Materials. 13th ed. Philadelphia: Elsevier Mosby; 2012: 161- 198.
7. Walker R, Burgess JO. Comparing resin-based composites. Compend Contin Educ Dent. 2004; 25(6): 424- 428.
8. Lu H, Lee YK, Oguri M, Powers JM. Properties of a dental resin composite with a spherical inorganic filler. Oper Dent. 2006; 31(6): 734‐740.

9. Lu H, Roeder LB, Lei L, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent. 2005; 17(2): 102‐109.
10. Mitra SB, Wu D, Holmes BN. An application of nanotechnology in advanced dental materials. J Am Dent Assoc. 2003; 134(10): 1382‐1390.
11. Tantanuch S, Kukiattrakoon B, Peerasukprasert T, Chanmanee N, Chaisomboonphun P, Rodklai A. Surface roughness and erosion of nanohybrid and nanofilled resin composites after immersion in red and white wine. J Conserv Dent. 2016; 19(1): 51‐55.
12. Lopes IAD, Monteiro PJVC, Mendes JJB, Gonçalves JMR, Caldeira FJF. The effect of different finishing and polishing techniques on surface roughness and gloss of two nanocomposites. Saudi Dent J. 2018; 30(3): 197‐207.
13. Johnston WM, Kao EC. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res. 1989; 68(5): 819–822
14. Douglas RD, Steinhauer TJ, Wee AG. Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch. J Prosthet Dent. 2007; 97(4): 200‐208.
15. Culpepper WD. A comparative study of shade-matching procedures. J Prosthet Dent. 1970; 24(2): 166‐173.
16. Miller LL. Shade matching. J Esthet Dent. 1993; 5(4): 143‐153.
17. Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent Mater. 1994; 10(6): 353‐362.
18. Mundim FM, Garcia Lda F, Cruvinel DR, Lima FA, Bachmann L, Pires-de-Souza Fde C. Color stability, opacity and degree of conversion of pre-heated composites. J Dent. 2011; 39 Suppl 1: e25‐e29.
19. Lutz F, Phillips RW. A classification and evaluation of composite resin systems. J Prosthet Dent. 1983; 50(4): 480‐488.
20. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005; 33(5): 389‐398.
21. Schmitt VL, Puppin‐Rontani RM, Naufel FS, Nahsan FP, Alexandre Coelho Sinhoreti M, Baseggio W. Effect of the polishing procedures on color stability and surface roughness of composite resins. ISRN Dent 2011; 2011: 617672.
22. Mundim FM, Garcia Lda F, Pires-de-Souza Fde C. Effect of staining solutions and repolishing on color stability of direct composites. J Appl Oral Sci. 2010; 18(3): 249–254
23. Yazici AR, Celik C, Dayangaç B, Ozgünaltay G. The effect of curing units and staining solutions on the color stability of resin composites. Oper Dent. 2007; 32(6): 616‐622.
24. Ertaş E, Güler AU, Yücel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006; 25(2): 371‐376.
25. Usha C, Rao SR, George GM. A comparative evaluation of the staining capacity of microhybrid and nanohybrid resin-based composite to indian spices and food colorants: An In vitro study. Indian J Dent Res. 2018; 29(2): 201‐205.
26. Yap AU, Low JS, Ong LF. Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives. Oper Dent. 2000; 25(3): 170‐176
27. Shree Roja RJ, Sriman N, Prabhakar V, Minu K, Subha A, Ambalavanan P. Comparative evaluation of color stability of three composite resins in mouthrinse: An in vitro study. J Conserv Dent. 2019; 22(2): 175‐180.
28. Yu B, Lim HN, Lee YK. Influence of nano-and micro-filler proportions on the optical property stability of experimental dental resin composites. Mater Des. 2010; 31(10): 4719-24.
29. Manabe A1, Kato Y, Finger WJ, Kanehira M, Komatsu M. Discoloration of coating resins exposed to staining solutions in vitro. Dent Mater J. 2009; 28(3): 338– 343
30. Söderholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. J Dent Res. 1984;63(10):1248‐1254.

Details

Primary Language

English

Subjects

Health Care Administration

Journal Section

Research Article

Authors

Sakshi Sachdeva
0000-0003-1315-1644
India

Subhashish Das
0000-0002-8844-2529
India

Aasadur Midday
0000-0001-5830-6019
India

Manuel Thomas ^*
0000-0002-3042-0669
India

Prashanthi Madhyastha
0000-0002-7281-3153
India

Publication Date

March 25, 2022

Submission Date

August 2, 2021

Acceptance Date

February 18, 2022

Published in Issue

Year 2022 Volume: 25 Number: 1

DOI

https://doi.org/10.7126/cumudj.957975

IZ

https://izlik.org/JA95LD63PC

Cite

RIS / Bibtex

EndNote

Sachdeva S, Das S, Midday A, Thomas M, Madhyastha P (March 1, 2022) Staining susceptibility of dental composite resins with various nano-filler technologies. Cumhuriyet Dental Journal 25 1 29–35.

Cited By

Color changes of nanofiller composite resin after glycerin application immersed in turmeric extract

Conservative Dentistry Journal

https://doi.org/10.20473/cdj.v13i1.2023.37-41

In Vitro Kinetic and Thermodynamic Staining Study of Three Energy Drinks on the Restorative Charisma Composite

Journal of International Society of Preventive and Community Dentistry

https://doi.org/10.4103/jispcd.jispcd_37_24

Staining susceptibility of dental composite resins with various nano-filler technologies

Abstract

Keywords

Öz

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite

Cited By

Color changes of nanofiller composite resin after glycerin application immersed in turmeric extract

In Vitro Kinetic and Thermodynamic Staining Study of Three Energy Drinks on the Restorative Charisma Composite