Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları

Altay Uludamar; Buket Akalin; Yasemin Kulak Ozkan

EN TR

Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları

Abstract

ÖZET

Tam seramik restorasyonların uzun dönem başarısı, uygun bir simanla yapıştırılmasına bağlıdır. Çinko fosfat simanlar ve modifiye cam iyonomer simanlar zrikonyum oksit restorasyonların simantasyonunda kullanılabilirler. Fakat, resin simanlar tutuculuk özelliklerinin daha iyi olması, marjinal uyumsuzluluk problemlerinin daha az olması ve kırılma dayanıklılığının yüksek olmasından dolayı daha fazla tercih edilmektedir. Son zamanda geliştirilen zirkonyum oksit seramik restorasyonlar ve rezin simanlar arasındaki bağlantının arttırılması hala devam eden bir sorundur. Zirkonyum oksit seramik restorasyonların üzerinde, asitleme işlemleri ve silan uygulanımı yeterli bir bağlantı kuvveti sağlamamaktadır. Zirkonyum oksit restorasyonların resin simanlarla bağlantı dayanımını arttırmak için uygulanan farklı yüzey işlemleri hakkında literatürde yeterli bilgi mevcut değildir. Bu makalede zirkonyum oksit restorasyonlar ve resin simanlar arasındaki bağlantı kuvvetini arttırmak için uygulanan çeşitli yüzey işlemlerinden bahsedilecektir.

SUMMARY

Longevity of all ceramic restorations in the oral environment is related to successful bonding of ceramic restorations on the tooth surface via appropriate luting cement. Zinc- phosphate or modified glass ionomer cements can be utilized for the cementation of Zirconium oxide restorations. However, resin luting cements are preferred due to their superior retentive properties, better seal of marginal discrepancies and increased fracture strength. Establishing a reliable bond in the interface of the recently developed zirconium oxide ceramic restorations and resin cements is still an ongoing problem. Application of ceramic etching acids and silane compounds on zirconium oxide ceramic restorations is not adequate enough for increasing the bond strength. There are currently not sufficient information concerning surface treatment methods for zirconium oxide restorations and their efficiency. Various surface treatment methods to improve the link between the zirconium oxide ceramic restoration and resin luting cement had been described in this article.

Keywords

Zirconium oxide restorations, surface treatment methods

References

Blatz MB, Sadan A, Kern M. Resin ceramic bonding: A review of literature. 2003;89:268-274. Dent
Chong KH, Chai J, Takahashi Y, Wozniak W. Flexural strength of in- ceram alumina and in-ceram zirconia core materials. Int J Prosthodont 2002; 15: 183-188.
Guazzato M, Albakry M, Ringer SM, Swain MV. Strength, fracture toughness and microstructre of a selection of all ceramic materials: Part ceramics. Dent Mater 2004;20:449- 456. dental 4. Raigrodski AJ. Contemporary materials and technologies for all- ceramic fixed partial dentures: A review of the literature. J Prosthet Dent 2004;92:557-562.
Walton JN, Gardner FM, Agar JR. A survey of crown and fixed partial denture failures: length of service and reasons for replacement. J Prosthet Dent 1986;56:416-421.
Diaz-Arnold AM, Vargas MA, Haselton DR. Current status of luting agents for fixed prosthodontics, J Prosthet Dent 1999;81:135-141.
El Zohairy AA, De Gee AJ, Mohsen MM, Feilzer AJ. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 2003;19:575-583.
Li ZC, White SN. Mechanical properties of dental luting cements, J Prosthet Dent 1999;81:597-609. 9. McLaren EA. All-Ceramic Alternatives to Conventional Metal Ceramic Restorations, Compend Contin Educ Dent 1998;19:307-326.
Allen EP, Bayne SC, Becker IM, Donovan TE, Hume WR, Kois JC. Annual review of selected dental literature: report of committee on scientific American Academy of Restorative Dentistry. 1999;82:27-66. of the J Prosthet Dent

Öztürk AN. Farklı seramik inleylerin direkt, indirekt ve klasik tekniklerle dentine bağlanma dayanımlarının karsılastırılması 2001; Doktora tezi, Konya.
Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: A review of the current literature, J Prosthet Dent 1998;80:280-301.
Roulet JF. Degradation of Dental Polymers, Karger Publications, Basel; New York. 1987.
Phillips RW. Skinner’s Science of Dental Materials, W.B. Saunders Company, 9th Edition, Philadelphia. 1991.
Magne P, Belser U. Bonded Porcelain Restorations in the Anterior Dentition: A Quintessence Publishing. Chapter 8. 2003. Approach.
Öztürk Ö, Uludağ B. Kompozit rezin esaslı yapıstırma simanları ve adeziv simantasyon 2002;6:33-39. TDBD
Ernst C-P, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents, J Prosthet Dent 2005;93:551- 558.
Ferrari M, Vichi A, Feilzer A. Operatif dishekimliğinde gelismeler: güncel pratik yayıncılık, cilt 1, bölüm 2006;8:95- 107. Quintessence
Blackman R, Barghi N, Duke E. Influence of ceramic thickness on the polimerization of light-cured resin cements, J Prosthet Dent 1990;63:295- 300.
Warren K. An investigation into the microhardness of a light cured composite when cured through varying thicknesses of porcelain, J Oral Rehabil 1990;17:327-34.
Hasegawa EA, Boyer DB, Chan DCN. Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent 1991;66:187-192.
Haffernan MJ, Aquilino SA, Diaz- Arnold AM, Haselton DR, Stanford CS, Vargas MA. Relative translucency of six all-ceramic systems. Part I: Core materials, J Prosthet Dent 2002;88:4-9.
Haffernan MJ, Aquilino SA, Diaz- Arnold AM, Haselton DR, Stanford CS, Vargas MA. Relative translucency of six all-ceramic systems. Part II: Core and veneer materials, J Prosthet Dent 2002;88:10-15.
Dérand T, Molin M, Kvam K. Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater 2005;21:1158-1162.
Libby G, Arcuri MR, La Velle WE, Hel L. Longevity of fixed partial dentures. J Prosthet Dent 1997;78:127- 131.
Kahvecioğlu S. Bir rezin simanın dört farklı metal alasımına bağlanma dayanımına metal primerlerin etkisi, 2006, Doktora tezi, Konya.
Qualtrough AJE, Piddock V. Recent advances in ceramic materials and systems for dental restorations. Dental Update 1999;26:65-72.
Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 1982;16:265-273.
Anusavice KJ. Recent developments in restorative dental ceramics. JADA 1993;124:72-84.
Della Bona A, Van Noort R. Ceramic surface preparations for resin bonding. Am J Dent 1998;11:276-280.
Della Bona A, Anusavice KJ. Microstructure, etching topography of dental ceramics. Int J Prosthodont 2002;15:159-167.
Özcan M, Valittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 2003;19:725-731.
Derand P, Derand T. Bond strength of luting cements to zirconium oxide ceramics. 2000;13:131-135. J Prosthodont
Nakamura S, Yoshida K, Kamada K, Atsuta M. Bonding between resin luting cement and glass infiltrated alumina-reinforced ceramics with silane coupling agent. J Oral Rehabil 2004;31:785-789.
Blatz MB, Sadan A, Kern M. Resin ceramic bonding: A review of literature. 2003;89:268-274. Prosthet Dent
Amaral R, Özcan M, Valandro LF, Bottino MA. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: The effect of surface conditioning. Dent Mater 2006;22:283-290.
Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998;14:64-71.
Wegner S, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000;2:139-147.
Piwowarczyk A, Ottl P, Lauer HC, Kuretzky T. Clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava All-Ceramic System. J Prosthodont 2005;14:39-45.
Kern M, Thompson VP. Sandblasting and silica coating of a glass-infiltrated alumina morphology and changes in the surface composition. 1994;71:453-461. Prosthet Dent
Awliya W, Oden A, Yaman P, Dennison JB, Razzoog ME. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand 1998;56:9-13.
Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y- TZP zirconia ceramic. Dent Mater 1999;15:426-433.
Uludamar A. Zirkonyum oksit seramik restorasyonlarda hazırlıklarının kompozit yapıstırma simanının bağlanmasına etkilerinin incelenmesi. 2006, Doktora tezi, Konya. farklı yüzey
Üsümez A, Aykent F. Bond strengths of porcelain laminate veneers to tooth surfaces prepared with acid and Er,Cr:YSGG laser etching. J Prosthet Dent 2003;90:24-30.
Van Meerbeck B, De Munck J, Mattar D, Van Landuyt K, Lambrechts P. Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface 2003;28:647-660. Oper Dent
Folwaczny M, Mehl A, Haffner C, Hickel R. Polishing and coating of dental ceramic materials with 308 nm XeCl excimer laser radiation. Dent Mater 1998;14:186-193.
Gökçe B, Özpınar B, Dündar M, Çömlekoğlu E, Sen BH, Güngör MA. Bond strengths of all ceramics: Acid vs laser etching. Oper Dent
Corona SA, de Souza AE, Chinelatti MA, Borsatto MC, Pecora JD, Palma Dibb RG. Effect of energy and pulse repetition rate of Er: YAG laser on dentin morphological analysis of the laser- irradiated substrate. Photomed Laser Surgery 2007;25:6-33. ability and
Silveira BL, Paglia A, Burnett LH, Shinkai RS, Eduardo P, Spohr AM. Micro-tensile bond strength between a resin cement and an aluminous ceramic treated with Nd:YAG laser, rocatec system, or aluminum oxide sandblasting. Photomed Laser Surgery 2005;23:543-548.
Cavalcanti AN, Foxton RM, Watson TF, Oliveira MT, Giannini M, Marchi GM.Bond Strength of Resin Cements to a Zirconia Ceramic with Different Surface Treatments. Oper 2009;34:280-287. Dent
Chan CM, Ko TM, Hiraoka H. Polymer surface modifications by plasmas and photons. Surf Sci Rep 1996;24:1–54.
Denes F. Synthesis and surface by modification plasma chemistry. TRIP 1997;5:23– 28. macromolecular
Kumbuloğlu O, Lassila LVJ, User A, Toksavul S, Vallittu PK. Shear bond strength of composite resin cements to lithium disilicate ceramics. J Oral Rehabil 2005;32:128-133.
Yoshida K, Tsuo Y, Atsuta M. Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler. J Biomed Mater Res 2006;77:28-33.
Oh W, Shen C. Effect of surface topography on the bond strength of a composite to three different types of ceramic, J Prosthet Dent 2003;90:241- 246.
Luthy H, Loeffel O, Hammerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006;22:195-200.
Matinlinna JP, Valittu PK. Silane based concepts on bonding resin composite to metals. J Contemp Dent Prac 2007;8:1-8.
Janda R, Roulet JF, Wulf M, Tiller HJ. A new adhesive technology for all- ceramics. Dent Mater 2003;19:567- 573.
Özcan M, Nijhuis H, Valandro LF. Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater 2008;27:99-104.
Kern M, Thompson VP. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: Volume loss, morphology and changes in the surface composition. 1994;71:453-461. Prosthet Dent
Laufer BZ, Nicholls JL, Thownsend JD. SiOX-C coating: A composite to metal bonding mechanism. J Prosthet Dent 1988;60:320-328.
Della Bona A, Anusavice KJ, Hood JAA. Effect of ceramic surface treatment on tensile bond strength to a resin cement, Int J Prosthodont 2002;15:248-253
Fischer J, Grohmann P, Stawarczyk B. Treatments on the Shear Strength of Zirconia/Veneering Composites. 2008;27:448-451. Ceramic Dent Mater
Hummel M, Kern M. Durability of the resin bond strength to the alumina ceramic Procera. Dent Mater
Matinlinna JP, Heikkinen T, Özcan M, Lassila VJ. Evaluation of resin adhesion to zirconia ceramic using some organosilanes. Dent Mater 2006;22:824-831.
Valandro LF, Della Bona A, Bottino MA, Neisser MP. The effect of silica coating a densely sintered alumina ceramic on bonding to a resin cement, J Prosthet Dent 2005;93:253–259.
Atsü S, Kılıçarslan MA, Küçükesmen HC, Aka S. Effect of zirconium oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 2006;95:430-436.

Details

Primary Language

English

Subjects

-

Journal Section

-

Authors

Altay Uludamar

Buket Akalin

Yasemin Kulak Ozkan

Publication Date

January 25, 2011

Submission Date

January 25, 2011

Acceptance Date

-

Published in Issue

Year 1970 Volume: 14 Number: 2

IZ

https://izlik.org/JA39RA77PN

Cite

RIS / Bibtex

EndNote

Uludamar A, Akalin B, Kulak Ozkan Y (May 1, 2011) Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları. Cumhuriyet Dental Journal 14 2 140–153.

Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları

Abstract

Keywords

Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları

Öz

Anahtar Kelimeler

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

IZ

Cite