Use of Micro Computed Tomography in Prosthetic Dentistry

Kübra Tokay Kızılırmak; Evşen Tamam

doi:10.7126/cumudj.1241456

EN TR

Use of Micro Computed Tomography in Prosthetic Dentistry

Abstract

Today, the use of micro-computed tomography is becoming widespread in almost every field of dental research. When the national review articles on micro-computed tomography are examined, it is seen that the focus is on endodontic and surgical dental applications. As prosthodontists, our article, which was compiled in order to deepen the specific usage areas of micro-computed tomography applications and to review the studies done in this area, provides information about the use of micro-computed tomography method in prosthetic dentistry. Micro-computed tomography is a powerful in vitro research method. Micro-computed tomography was used; marginal and internal compatibility of restorations, cement spacing of restorations, adaptation of denture bases, accuracy of prosthetic measurements, effects of occlusal irregularities, volumetric changes in teeth due to dental post application, biomechanical evaluation of implant-abutment connection, and compatibility of maxillofacial prostheses.

Keywords

References

1. Dunn PM. Wilhelm Conrad Röentgen (1845–1923), the discovery ofx rays and perinatal diagnosis. Arch Dis Child Fetal Neonatal Ed. 2001;84(2):F138-139.
2. Elliott JC, Dover S. X‐ray microtomography. J Microsc. 1982;126(Pt 2):211-213.
3. Güner O, Altıntaş G, Ergüt A. Mikro-CT Çözünürlüğünün Voksel Tabanlı Model ve Analiz Sonuçları Üzerindeki Etkileri-Effect of Micro-CT Resolutions of Voxel Based Model and Analysis Results. Celal Bayar University Journal of Science.2015;11(2):0-.
4. Feldkamp LA, Goldstein SA, Parfitt MA, Jesion G, Kleerekoper M. The direct examination of three‐dimensional bone architecture in vitro by computed tomography. J Bone Miner Res. 1989;4(1):3-11.
5. Kuhn JL, Goldstein SA, Feldkamp LA, Goulet RW, Jesion G. Evaluation of a microcomputed tomography system to study trabecular bone structure. J Orthop Res. 1990;8(6):833-842.
6. Hounsfield GN. Computerized transverse axial scanning (tomography): Part 1. Description of system. Br J Radiol. 1973;46(552):1016-1022.
7. Swain MV, Xue J. State of the art of Micro‐CT applications in dental research. Int J Oral Sci. 2009;1(4):177-188.
8. Guldberg RE, Ballock RT, Boyan BD, Duvall CL, Lin AS, Nagaraja S, et al. Analyzing bone, blood vessels, and biomaterials with microcomputed tomography. IEEE Eng Med Biol Mag. 2003;22(5):77-83.

9. Guldberg RE, Lin AS, Coleman R, Robertson G, Duvall C. Microcomputed tomography imaging of skeletal development and growth. Birth Defects Res C Embryo Today. 2004;72(3):250-259.
10. Bauer JRdO, Grande RHM, Rodrigues-Filho LE, Pinto MM, Loguercio AD. Does the casting mode influence microstructure, fracture and properties of different metal ceramic alloys. Braz Oral Res. 2012;26(3):190-196.
11. Layton D. A critical appraisal of the survival and complication rates of tooth-supported all-ceramic and metal-ceramic fixed dental prostheses: the application of evidence-based dentistry. Int J Prosthodont. 2011;24(5):417-427.
12. Felton DA, Kanoy BE, Bayne SC, Wirthman GP. Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent. 1991;65(3):357-364.
13. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br dent j. 1971;131(3):107-111.
14. Pimenta MA, Frasca LC, Lopes R, Rivaldo E. Evaluation of marginal and internal fit of ceramic and metallic crown copings using x-ray microtomography (micro-CT) technology. The J Prosthet Dent. 2015;114(2):223-238.
15. Pelekanos S, Koumanou M, Koutayas S, Zinelis S, Eliades G. Micro-CT evaluation of the marginal fit of different In-Ceram alumina copings. Eur J Esthet Dent. 2009;4(3):278-292.
16. Borba M, Miranda WG, Cesar PF, Griggs JA, Bona AD. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology. Braz Oral Res. 2013;27(5):396-402.
17. Demir N, Ozturk AN, Malkoc MA. Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique. Eur Journal Dent. 2014;8(04):437-444.
18. Kim J-H, Jeong J-H, Lee J-H, Cho H-W. Fit of lithium disilicate crowns fabricated from conventional and digital impressions assessed with micro-CT. J Prosthet Dent. 2016;116(4):551-557.
19. Kim E-H, Lee D-H, Kwon S-M, Kwon T-Y. A microcomputed tomography evaluation of the marginal fit of cobalt-chromium alloy copings fabricated by new manufacturing techniques and alloy systems. J Prosthet Dent. 2017;117(3):393-399.
20. Alajaji NK, Bardwell D, Finkelman M, Ali A. Micro‐CT Evaluation of Ceramic Inlays: Comparison of the Marginal and Internal Fit of Five and Three Axis CAM Systems with a Heat Press Technique. J Esthet Res Dent. 2017;29(1):49-58.
21. Moris ICM, Monteiro SB, Martins R, Ribeiro RF, Gomes EA. Influence of manufacturing methods of implant-supported crowns on external and internal marginal fit: a micro-CT analysis. BioMed Res İnt. 2018;2018:5049605.
22. Duqum IS, Brenes C, Mendonca G, Carneiro TAPN, Cooper LF. Marginal Fit Evaluation of CAD/CAM All Ceramic Crowns Obtained by Two Digital Workflows: An In Vitro Study Using Micro‐CT Technology. JvProsthodont. 2019;28(9):1037-1043.
23. Bayrak A, Akat B, Ocak M, Kılıçarslan MA, Özcan M. Micro-Computed Tomography Analysis of Fit of Ceramic Inlays Produced with Different CAD Software Programs. Eur J Prosthodont Restor Dent. 2021;29(3).
24. Ekici Z, Kılıçarslan MA, Bilecenoğlu B, Ocak M. Micro-CT Evaluation of the Marginal and Internal Fit of Crown and Inlay Restorations Fabricated Via Different Digital Scanners belonging to the Same CAD-CAM System. Int J Prosthodont. 2021;34(3):381-399.
25. Baldi A, Comba A, Ferrero G, Italia E, Tempesta RM, Paolone G, et al. External gap progression after cyclic fatigue of adhesive overlays and crowns made with high translucency zirconia or lithium silicate. J Esthet Rest Dent. 2022;34(3):557-64.
26. Tamam E, Güngör MB, Nemli SK, Bilecenoğlu B, Ocak M. Effect of different preparation finishing procedures on the marginal and internal fit of CAD-CAM-produced restorations: A microcomputed tomography evaluation. J Prosthet Dent. 2021;S0022-3913(21)00631-4.
27. Frankenberger R, Sindel J, Kramer N, Petschelt A. Dentin bond strength and marginal adaptation: direct composite resins vs ceramic inlays. Oper Dent. 1999;24(3):147-155.
28. Alfaro DP, Ruse ND, Carvalho RM, Wyatt CC. Assessment of the internal fit of lithium disilicate crowns using micro‐CT. J Prosthodont. 2015;24(5):381-386.
29. Uzgur R, Ercan E, Uzgur Z, Çolak H, Yalçın M, Özcan M. Cement Thickness of Inlay Restorations Made of Lithium Disilicate, Polymer‐Infiltrated Ceramic and Nano‐Ceramic CAD/CAM Materials Evaluated Using 3D X‐Ray Micro‐Computed Tomography. J Prosthodont. 2018;27(5):456-460.
30. Liu B, Lu C, Wu Y, Zhang X, Arola D, Zhang D. The Effects of Adhesive Type and Thickness on Stress Distribution in Molars Restored with All‐Ceramic Crowns. J Prosthodont. 2011;20(1):35-44.
31. Al-Saleh S, Aboghosh TW, Hazazi MS, Binsaeed KA, Almuhaisen AM, Tulbah HI, et al. Polymer-Based Bioactive Luting Agents for Cementation of All-Ceramic Crowns: An SEM, EDX, Microleakage, Fracture Strength, and Color Stability Study. Polymers(Basel). 2021;13(23):4227.
32. Darvell BW, Clark RK. The physical mechanisms of complete denture retention. Br Dent J. 2000;189(5):248-52.
33. Lee C-J, Bok S-B, Bae J-Y, Lee H-H. Comparative adaptation accuracy of acrylic denture bases evaluated by two different methods. Dent Mater J. 2010;29(4):411-417.
34. Hwang H-J, Lee SJ, Park E-J, Yoon H-I. Assessment of the trueness and tissue surface adaptation of CAD-CAM maxillary denture bases manufactured using digital light processing. J Prosthet Dent. 2019;121(1):110-117.
35. Yoon H-I, Hwang H-J, Ohkubo C, Han J-S, Park E-J. Evaluation of the trueness and tissue surface adaptation of CAD-CAM mandibular denture bases manufactured using digital light processing. J Prosthet Dent. 2018;120(6):919-926.
36. Tayman MA, Kamburoğlu K, Küçük Ö, Ateş FS, Günhan M. Comparison of linear and volumetric measurements obtained from periodontal defects by using cone beam-CT and micro-CT: an in vitro study. Clin Oral İnvestig. 2019;23(5):2235-2244.
37. Oğuz Eİ, Kılıçarslan MA, Özcan M, Ocak M, Bilecenoğlu B, Orhan K. Evaluation of Denture Base Adaptation Fabricated Using Conventional, Subtractive, and Additive Technologies: A Volumetric Micro‐Computed Tomography Analysis. J Prosthodont 2021;30(3):257-263.
38. Donovan TE, Chee WWL. A review of contemporary impression materials and techniques. Dent Clin North Am. 2004;48(2):vi-vii,445-470.
39. Yuzbasioglu E, Kurt H, Turunc R, Bilir H. Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes. BMC Oral Health. 2014;14:10.
40. Rhee Y-K, Huh Y-H, Cho L-R, Park C-J. Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition. J Adv Prosthodont. 2015;7(6):460-467.
41. Li Y-X, Bai Y-X, Wei C-F. Three-dimensional digital dental model based on micro-CT. Zhonghua Kou Qiang Yi Xue Za Zhi. 2011;46(1):47-49.
42. Kim C, Baek SH, Lee T, Go J, Kim SY, Cho S. Efficient digitalization method for dental restorations using micro-CT data. Sci Rep. 2017;7:44577.
43. Hamm J, Berndt E-U, Beuer F, Zachriat C. Evaluation of model materials for CAD/CAM in vitro studies. Int J Comput Dent. 2020;23(1):49-56.
44. Walker CG, Ito Y, Dangaria S, Luan X, Diekwisch TGH. RANKL, osteopontin, and osteoclast homeostasis in a hyperocclusion mouse model. Eur J Oral Sci. 2008;116(4):312-318.
45. Lee J-H, Kim H-J, Yun J-H. Three-dimensional microstructure of human alveolar trabecular bone: a micro-computed tomography study. J Periodontal İmplant Sci. 2017;47(1):20-29.
46. Kim T, Lee W, Baek S-H, Pyo S, Kook Y-A, Bayome M, et al. Effects of alveolar bone displacement with segmental osteotomy: micro-CT and histomorphometric analysis in rats. Braz Oral Res. 2016;30(1):e132.
47. Tsutsumi T, Kajiya H, Tsuzuki T, Goto KT, Okabe K, Takahashi Y. Micro-computed tomography for evaluating alveolar bone resorption induced by hyperocclusion. J Prosthodont Res. 2018;62(3):298-302.
48. Zhang Y, Xu X, Zhou P, Liu Q, Zhang M, Yang H et al. Elder Mice Exhibit More Severe Degeneration and Milder Regeneration in Temporomandibular Joints Subjected to Bilateral Anterior Crossbite. Front Physiol. 2021;12:750468.
49. Peters OA, Peters CI, Schonenberger K, Barbakow F. ProTaper rotary root canal preparation: effects of canal anatomy on final shape analysed by micro CT. Int Endod J. 2003;36(2):86-92.
50. Ikram O, Patel S, Sauro S, Mannocci F. Micro‐computed tomography of tooth tissue volume changes following endodontic procedures and post space preparation. Int Endod J. 2009;42(12):1071-1076.
51. Kim JJ, Alapati S, Knoernschild KL, Jeong YH, Kim DG, Lee DJ. Micro‐Computed Tomography of Tooth Volume Changes Following Post Removal. J Prosthodont. 2017;26(6):522-528.
52. Chang Y-H, Wang H-W, Lin P-H, Lin C-L. Evaluation of early resin luting cement damage induced by voids around a circular fiber post in a root canal treated premolar by integrating micro-CT, finite element analysis and fatigue testing. Dent Mater. 2018;34(7):1082-1088.
53. Soares AP, Bitter K, Lagrange A, Rack A, Shemesh H, Zaslansky P. Gaps at the interface between dentine and self‐adhesive resin cement in post‐endodontic restorations quantified in 3D by phase contrast‐enhanced micro‐CT. Int Endod J. 2020;53(3):392-402.
54. Çehreli MC, Akça K, İplikçioğlu H, Şahin S. Dynamic fatigue resistance of implant–abutment junction in an internally notched morse‐taper oral implant: influence of abutment design. Clin Oral Implants Res. 2004;15(4):459-465.
55. Khraisat A, Stegaroiu R, Nomura S, Miyakawa O. Fatigue resistance of two implant/abutment joint designs. J Prosthet Dent. 2002;88(6):604-610.
56. Schmitt CM, Nogueira‐Filho G, Tenenbaum HC, Lai JY, Brito C, Döring H, et al. Performance of conical abutment (Morse Taper) connection implants: a systematic review. J Biomed Mater Res A. 2014;102(2):552-574.
57. Cha H-S, Kim Y-S, Jeon J-H, Lee J-H. Cumulative survival rate and complication rates of single‐tooth implant; focused on the coronal fracture of fixture in the internal connection implant. J Oral Rehabil. 2013;40(8):595-602.
58. Mombelli A, Müller N, Cionca N. The epidemiology of peri‐implantitis. Clin Oral İmplants Res. 2012;23 Suppl 6:67-76.
59. Wilson Jr TG, Valderrama P, Burbano M, Blansett J, Levine R, Kessler H, et al. Foreign bodies associated with peri‐implantitis human biopsies. J Periodontol. 2015;86(1):9-15.
60. Karl M, Taylor TD. Parameters determining micromotion at the implant-abutment interface. Int J Oral Maxillofac Implants. 2014;29(6):1338-1347.
61. Stimmelmayr M, Edelhoff D, Güth J-F, Erdelt K, Happe A, Beuer F. Wear at the titanium–titanium and the titanium–zirconia implant–abutment interface: A comparative in vitro study. Dent Mater. 2012;28(12):1215-1220.
62. Blum K, Wiest W, Fella C, Balles A, Dittmann J, Rack A, et al. Fatigue induced changes in conical implant–abutment connections. Dent Mater. 2015;31(11):1415-1426.
63. Rezende CEE, Griggs JA, Duan Y, Mushashe AM, Nolasco GMC, et al. An indirect method to measure abutment screw preload: A pilot study based on micro-CT scanning. Braz Dent J. 2015;26(6):596-601.
64. Kapishnikov S, Gadyukov A, Chaushu G, Chaushu L. Micro-CT Analysis of Microgap at a Novel Two-Piece Dental Implant Comprising a Replaceable Sleeve In Vitro. Intl J Oral Maxillofac Implants. 2021;36(3):451-459.
65. Bagegni A, Zabler S, Nelson K, Rack A, Spies BC, Vach K, et al. Synchrotron-based micro computed tomography investigation of the implant-abutment fatigue-induced microgap changes. J Mech Behav Biomed Mater. 2021;116:104330.
66. Bergamo ETP, Campos TMB, Lopes ACO, Cardoso KB, Gouvea MVR, de Araújo-Júnior ENS, et al. Hydrothermal aging affects the three-dimensional fit and fatigue lifetime of zirconia abutments. J Mech Behav Biomed Mater. 2021;124:104832.
67. Verdonschot N, Fennis WM, Kuijs RH, Stolk J, Kreulen CM, Creugers NH. Generation of 3-D finite element models of restored human teeth using micro-CT techniques. Int J Prosthodont. 2001;14(4):310-315.
68. Magne P. Efficient 3D finite element analysis of dental restorative procedures using micro-CT data. Dent Mater. 2007;23(5):539-548.
69. Della Bona A, Borba M, Benetti P, Duan Y, Griggs JA. Three-dimensional finite element modelling of all-ceramic restorations based on micro-CT. J Dent. 2013;41(5):412-419.
70. Marcián P, Wolff J, Horáčková L, Kaiser J, Zikmund T, Borák L. Micro finite element analysis of dental implants under different loading conditions. Comput Biol Med. 2018;96:157-165.
71. Ausiello P, Tribst JPM, Ventre M, Salvati E, di Lauro AE, Martorelli M, et al. The role of cortical zone level and prosthetic platform angle in dental implant mechanical response: A 3D finite element analysis. Dent Mater. 2021;37(11):1688-1697.
72. Kaigler D, Mooney D. Tissue engineering's impact on dentistry. J Dent Educ. 2001;65(5):456-462.
73. Hollister SJ, Lin CY, Saito E, Lin CY, Schek RD, Taboas JM, et al. Engineering craniofacial scaffolds. Orthod Craniofac Res. 2005;8(3):162-173.
74. Hatamleh MM, Watts DC. Porosity and color of maxillofacial silicone elastomer. J Prosthodont. 2011;20(1):60-66.
75. Artopoulou II, Chambers MS, Eliades G. Porosity of maxillofacial silicone elastomers and microleakage pattern of the commercially pure Ti-silicone elastomer interface after hydrothermal cycling. J Prosthet Dent. 2016;116(6):937-942.

Details

Primary Language

English

Subjects

Health Care Administration

Journal Section

Review

Authors

Kübra Tokay Kızılırmak ^*
0000-0002-4436-0775
Türkiye

Evşen Tamam
0000-0002-3696-6734
Türkiye

Publication Date

March 26, 2023

Submission Date

January 24, 2023

Acceptance Date

January 29, 2023

Published in Issue

Year 1970 Volume: 26 Number: 1

DOI

https://doi.org/10.7126/cumudj.1241456

IZ

https://izlik.org/JA53NW62KD

Cite

RIS / Bibtex

EndNote

Tokay Kızılırmak K, Tamam E (March 1, 2023) Use of Micro Computed Tomography in Prosthetic Dentistry. Cumhuriyet Dental Journal 26 1 77–86.

Use of Micro Computed Tomography in Prosthetic Dentistry

Use of Micro Computed Tomography in Prosthetic Dentistry

Abstract

Keywords

Protetik Diş Hekimliğinde Mikro Bilgisayarlı Tomografi Kullanımı

Öz

Anahtar Kelimeler

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite