Araştırma Makalesi
Chromium-Aluminide Coatings via Pack Cementation Method on Inconel 718 Alloy and Fe-Cr-Ni SuperAlloy
Öz
In
this study, it is invastigated the low-temperature formation of chromium
aluminide coatings on a CrNiFe-base superalloy and Inconel 718 by pack
cementation process. A novel pack-aluminizing diffusion coating was applied at
800°C during 4 and 6 hours.The chrom-aluminising powder packs were prepared
using aluminium and chromium powders as a source for depositing aluminium and
chrominium, Al2O3 powder as an inert filler and ammonium
chloride NH4Cl as an activator. A scanning electron microscope (SEM)
with energy dispersive X-ray spectrometer (EDS) and XRD were used to
characterize the surface layers. SEM analysis revealed that coating layers were
homogenous, compact and nonporous and there was a good bonding at the interface
of the coating and matrix. Layer thickness variation was changed from 11,17 to
18,2 µm measured from the surface to the matrix. The hardness of the coating
layer increased to 1000 HVN while the hardness of the matrix was 350 HVN with
the increasing process time.
Anahtar Kelimeler
Kaynakça
- [1] I. Schoukens, I. Vandendael, J. De Strycker, A. A. Saleh, H. Terryn, and I. De Graeve, “Effect of surface composition and microstructure of aluminised steel on the formation of a titanium-based conversion layer,” Surface and Coatings Technology, vol. 235, pp. 628–636, Nov. 2013.
- [2] Z. D. Xiang and P. K. Datta, “Relationship between pack chemistry and aluminide coating formation for low-temperature aluminisation of alloy steels,” Acta Materialia, vol. 54, pp. 4453–4463, 2006.
- [3] R. Pillai et al., “Carbides in an aluminised single crystal superalloy: Tracing the source of carbon,” Surface and Coatings Technology, vol. 288, pp. 15–24, 2016.
- [4] A. Erdogan, “Investigation of high temperature dry sliding behavior of borided H13 hot work tool steel with nanoboron powder,” Surface & Coatings Technology, 2018.
- [5] M. Sabri, A. Erdogan, M. Öge, and A. Günen, “Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures,” Surface & Coatings Technology, vol. 328, pp. 54–62, 2017.
- [6] D. Chaliampalias et al., “The effect of Al and Cr additions on pack cementation zinc coatings,” Applied Surface Science, vol. 256, no. 11, pp. 3618–3623, Mar. 2010.
- [7] Y. F. Yang, C. Y. Jiang, Z. B. Bao, S. L. Zhu, and F. H. Wang, “Effect of aluminisation characteristics on the microstructure of single phase β-(Ni,Pt)Al coating and the isothermal oxidation behaviour,” Corrosion Science, vol. 106, pp. 43–54, 2016.
- [8] C. Houngninou, S. Chevalier, and J. . Larpin, “Synthesis and characterisation of pack cemented aluminide coatings on metals,” Applied Surface Science, vol. 236, no. 1–4, pp. 256–269, Sep. 2004.
- [9] K. Nikolov, P. Kaestner, C. P. Klages, S. Puls, and B. Schuhmacher, “Low-pressure diffusion chromising of thin low-carbon steel sheet for improved surface and bulk properties,” Journal of Alloys and Compounds, vol. 692, pp. 101–107, 2017.
- [10] F. J. Pérez, F. Pedraza, M. P. Hierro, M. C. Carpintero, and C. Gómez, “Chromising of stainless steels by the use of the CVD-FBR technology,” Surface and Coatings Technology, vol. 184, no. 1, pp. 47–54, 2004.
- [11] X. J. Lu and Z. D. Xiang, “Formation of chromium nitride coatings on carbon steels by pack cementation process,” Surface and Coatings Technology, vol. 309, pp. 994–1000, Jan. 2017.
- [12] Z. D. Xiang and P. K. Datta, “Pack aluminisation of low alloy steels at temperatures below 700 °C,” Surface and Coatings Technology, vol. 184, no. 1, pp. 108–115, Jun. 2004.
Yıl 2019,
Cilt: 23 Sayı: 5, 817 - 823, 01.10.2019
Öz
Kaynakça
- [1] I. Schoukens, I. Vandendael, J. De Strycker, A. A. Saleh, H. Terryn, and I. De Graeve, “Effect of surface composition and microstructure of aluminised steel on the formation of a titanium-based conversion layer,” Surface and Coatings Technology, vol. 235, pp. 628–636, Nov. 2013.
- [2] Z. D. Xiang and P. K. Datta, “Relationship between pack chemistry and aluminide coating formation for low-temperature aluminisation of alloy steels,” Acta Materialia, vol. 54, pp. 4453–4463, 2006.
- [3] R. Pillai et al., “Carbides in an aluminised single crystal superalloy: Tracing the source of carbon,” Surface and Coatings Technology, vol. 288, pp. 15–24, 2016.
- [4] A. Erdogan, “Investigation of high temperature dry sliding behavior of borided H13 hot work tool steel with nanoboron powder,” Surface & Coatings Technology, 2018.
- [5] M. Sabri, A. Erdogan, M. Öge, and A. Günen, “Dry sliding wear behavior of borided hot-work tool steel at elevated temperatures,” Surface & Coatings Technology, vol. 328, pp. 54–62, 2017.
- [6] D. Chaliampalias et al., “The effect of Al and Cr additions on pack cementation zinc coatings,” Applied Surface Science, vol. 256, no. 11, pp. 3618–3623, Mar. 2010.
- [7] Y. F. Yang, C. Y. Jiang, Z. B. Bao, S. L. Zhu, and F. H. Wang, “Effect of aluminisation characteristics on the microstructure of single phase β-(Ni,Pt)Al coating and the isothermal oxidation behaviour,” Corrosion Science, vol. 106, pp. 43–54, 2016.
- [8] C. Houngninou, S. Chevalier, and J. . Larpin, “Synthesis and characterisation of pack cemented aluminide coatings on metals,” Applied Surface Science, vol. 236, no. 1–4, pp. 256–269, Sep. 2004.
- [9] K. Nikolov, P. Kaestner, C. P. Klages, S. Puls, and B. Schuhmacher, “Low-pressure diffusion chromising of thin low-carbon steel sheet for improved surface and bulk properties,” Journal of Alloys and Compounds, vol. 692, pp. 101–107, 2017.
- [10] F. J. Pérez, F. Pedraza, M. P. Hierro, M. C. Carpintero, and C. Gómez, “Chromising of stainless steels by the use of the CVD-FBR technology,” Surface and Coatings Technology, vol. 184, no. 1, pp. 47–54, 2004.
- [11] X. J. Lu and Z. D. Xiang, “Formation of chromium nitride coatings on carbon steels by pack cementation process,” Surface and Coatings Technology, vol. 309, pp. 994–1000, Jan. 2017.
- [12] Z. D. Xiang and P. K. Datta, “Pack aluminisation of low alloy steels at temperatures below 700 °C,” Surface and Coatings Technology, vol. 184, no. 1, pp. 108–115, Jun. 2004.
Toplam 12 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Malzeme Üretim Teknolojileri |
| Bölüm | Araştırma Makalesi |
| Yazarlar | |
| Yayımlanma Tarihi | 1 Ekim 2019 |
| Gönderilme Tarihi | 11 Aralık 2018 |
| Kabul Tarihi | 8 Nisan 2019 |
| Yayımlandığı Sayı | Yıl 2019 Cilt: 23 Sayı: 5 |
Kaynak Göster
Cited By
LOW TEMPERATURE ALUMINIZATION EFFECT ON MONEL 400 ALLOY PRODUCED BY PACK CEMENTATION METHOD
Mugla Journal of Science and Technology
https://doi.org/10.22531/muglajsci.1310224
Low Temperature Pack Aluminising Process Effect on Ti6Al4V Alloy: Formation, Characterization and Oxidation Performances
Transactions of the Indian Institute of Metals
https://doi.org/10.1007/s12666-023-02883-8
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.