Araştırma Makalesi
BibTex RIS Kaynak Göster

Evaluation of color stability of bulk-fill restorative materials with different properties

Yıl 2023, Cilt: 6 Sayı: 6, 1360 - 1365, 29.10.2023
https://doi.org/10.32322/jhsm.1347899

Öz

Aims: The present study aims to evaluate the color stability of bulk-fill restorative materials with different properties over different time periods when immersed in a coffee solution.
Methods: According to the selected restorative materials, the study groups were formed as follows: CNT/light (Alkasite, Cention N, Ivoclar Vivadent, light cure mode), CNT/self (Alkasite, Cention N, self cure mode) EQF (Glass hybrid restorative, Equia Forte HT, GC Corporation), AU (Single-shade bulk fill, Aura Bulk Fill, SDI), Z550 (Filtek Z550, 3M) (control group). A total of 50 samples (n=10) were prepared using standard molds (2mmx10mm). After finishing and polishing procedures, all samples were kept in distilled water at 37°C for 24 hours. The first color measurement (L*a*b ) was performed with Vita Easy Shade V (VITA Zahnfabrik). Samples were added to the coffee solution. Color was measured at times simulating 7 days, 1 month, 6 months and 1 year of clinical service. Color changes (ΔE1, ΔE2, ΔE3 and ΔE4) were calculated according to the CIE L*a*b system. Normality of the data was examined by D'Agostino & Pearson omnibus normality test. One-way ANOVA analysis and Tukey test were performed. Statistical significance level was set at p 0.05 and statistical analysis software (GraphPad Prism 6.0, GraphPad Software, USA) was used for the analysis.
Results: According to ΔE1 results; clinically unacceptable color change (ΔE>3.3) values were observed in CNT/light and CNT/self groups. The color change values of EQF, Z550 and AU groups were statistically similar (p>0.05). According to ΔE2 results; an unacceptable color change (ΔE>3.3) was observed in all groups except EQF. According to ΔE3 results; an unacceptable color change (ΔE>3.3) was observed in all groups. According to ΔE4 results; an unacceptable color change (ΔE>3.3) was observed in all groups. The color change values of EQF, Z550 and AU groups were statistically similar (p>0.05). CNT/light group showed the highest color change in all time periods, followed by CNT/self group.
Conclusion: The color stability of single-shade bulk fill material and glass hybrid restorative materials is similar to the control group. The color stability of alkasite material needs to be improved.

Kaynakça

  • Barutcigil Ç, Barutcigil K, Özarslan MM, Dündar A, Yilmaz B. Color of bulk-fill composite resin restorative materials. J Esthet Restor Dent. 2018;30(2):E3-E8.
  • Lucena C, Ruiz-López J, Pulgar R, Della Bona A, Pérez MM. Optical behavior of one-shaded resin-based composites. Dent Mater. 2021;37(5):840-848.
  • Paolone G, Mandurino M, Scotti N, Cantatore G, Blatz MB. Color stability of bulk-fill compared to conventional resin-based composites: a scoping review. J Esthet Restor Dent. 2023;35(4):657-676.
  • Veloso SRM, Lemos CAA, de Moraes SLD, do Egito Vasconcelos BC, Pellizzer EP, de Melo Monteiro GQ. Clinical performance of bulk-fill and conventional resin composite restorations in posterior teeth: a systematic review and meta-analysis. Clin Oral Investig. 2019;23(1):221-233.
  • Yazkan B. Surface degradation evaluation of different self-adhesive restorative materials after prolonged energy drinks exposure. J Esthet Restor Dent. 2020;32(7):707-714.
  • Latta MA, Tsujimoto A, Takamizawa T, Barkmeier WW. Enamel and dentin bond durability of self-adhesive restorative materials. J Adhes Dent. 2020;22(1):99-105.
  • Latta MA, Tsujimoto A, Takamizawa T, Barkmeier WW. In vitro wear resistance of self-adhesive restorative materials. J Adhes Dent. 2020;22(1):59-64.
  • Kaptan A, Oznurhan F, Candan M. In vitro comparison of surface roughness, flexural, and microtensile strength of various glass-ionomer-based materials and a new alkasite restorative material. Polymers. 2023;15(3):650.
  • Yazkan B, Celik EU, Recen D. Effect of aging on surface roughness and color stability of a novel alkasite in comparison with current direct restorative materials. Oper Dent. 2021;46(5):E240-E250.
  • Brkanović S, Ivanišević A, Miletić I, Mezdić D, Jukić Krmek S. Effect of nano-filled protective coating and different pH enviroment on wear resistance of new glass hybrid restorative material. Materials. 2021;14(4):755.
  • Gowda A, Guria A. Comparative evaluation of microleakage in alkasite and glass-hybrid restorative system: an in-vitro. IJRG 2019;7(4):199-205.
  • Güner ZŞ, Bolgül B, İnandı T. Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites. Int Dent Res. 2021;11(Suppl. 1):266-273.
  • Veček NN, Par M, Sever EK, Miletić I, Krmek SJ. The effect of a green smoothie on microhardness, profile roughness and color change of dental restorative materials. Polymers. 2022;14(10):2067.
  • Tepe H, Erdılek AD, Sahın M, Efes BG, Yaman BC. Effect of different polishing systems and speeds on the surface roughness of resin composites. J Conserv Dent JCD. 2023;26(1):36.
  • Ertas E, Gueler AU, Yuecel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006;25(2):371-376.
  • Paolone G, Formiga S, De Palma F, et al. Color stability of resin-based composites: Staining procedures with liquids-a narrative review. J Esthet Restor Dent. 2022;34(6):865-887.
  • Korkut B, Haciali C. Color stability of flowable composites in different viscosities. Clin Exp Health Sci. 2020;10(4):454-461.
  • Meshki R, Rashidi M. Effect of natural and commercially produced juices on colour stability of microhybrid and nanohybrid composites. BDJ Open. 2022;8(1):11.
  • Hatirli H, Tonga G, Boyraz Ş. Water sorption, solubility and color stability of different bulk-fill restorative materials. Cumhur Dent J. 2022;25(4):293-301.
  • Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent. 2012;40:e57-e63.
  • Amalavathy RK, Sahoo HS, Shivanna S, Lingaraj J, Aravinthan S. Staining effect of various beverages on and surface nano-hardness of a resin coated and a non-coated fluoride releasing tooth-coloured restorative material: An in-vitro study. Heliyon. 2020;6(6):e04345
Yıl 2023, Cilt: 6 Sayı: 6, 1360 - 1365, 29.10.2023
https://doi.org/10.32322/jhsm.1347899

Öz

Kaynakça

  • Barutcigil Ç, Barutcigil K, Özarslan MM, Dündar A, Yilmaz B. Color of bulk-fill composite resin restorative materials. J Esthet Restor Dent. 2018;30(2):E3-E8.
  • Lucena C, Ruiz-López J, Pulgar R, Della Bona A, Pérez MM. Optical behavior of one-shaded resin-based composites. Dent Mater. 2021;37(5):840-848.
  • Paolone G, Mandurino M, Scotti N, Cantatore G, Blatz MB. Color stability of bulk-fill compared to conventional resin-based composites: a scoping review. J Esthet Restor Dent. 2023;35(4):657-676.
  • Veloso SRM, Lemos CAA, de Moraes SLD, do Egito Vasconcelos BC, Pellizzer EP, de Melo Monteiro GQ. Clinical performance of bulk-fill and conventional resin composite restorations in posterior teeth: a systematic review and meta-analysis. Clin Oral Investig. 2019;23(1):221-233.
  • Yazkan B. Surface degradation evaluation of different self-adhesive restorative materials after prolonged energy drinks exposure. J Esthet Restor Dent. 2020;32(7):707-714.
  • Latta MA, Tsujimoto A, Takamizawa T, Barkmeier WW. Enamel and dentin bond durability of self-adhesive restorative materials. J Adhes Dent. 2020;22(1):99-105.
  • Latta MA, Tsujimoto A, Takamizawa T, Barkmeier WW. In vitro wear resistance of self-adhesive restorative materials. J Adhes Dent. 2020;22(1):59-64.
  • Kaptan A, Oznurhan F, Candan M. In vitro comparison of surface roughness, flexural, and microtensile strength of various glass-ionomer-based materials and a new alkasite restorative material. Polymers. 2023;15(3):650.
  • Yazkan B, Celik EU, Recen D. Effect of aging on surface roughness and color stability of a novel alkasite in comparison with current direct restorative materials. Oper Dent. 2021;46(5):E240-E250.
  • Brkanović S, Ivanišević A, Miletić I, Mezdić D, Jukić Krmek S. Effect of nano-filled protective coating and different pH enviroment on wear resistance of new glass hybrid restorative material. Materials. 2021;14(4):755.
  • Gowda A, Guria A. Comparative evaluation of microleakage in alkasite and glass-hybrid restorative system: an in-vitro. IJRG 2019;7(4):199-205.
  • Güner ZŞ, Bolgül B, İnandı T. Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites. Int Dent Res. 2021;11(Suppl. 1):266-273.
  • Veček NN, Par M, Sever EK, Miletić I, Krmek SJ. The effect of a green smoothie on microhardness, profile roughness and color change of dental restorative materials. Polymers. 2022;14(10):2067.
  • Tepe H, Erdılek AD, Sahın M, Efes BG, Yaman BC. Effect of different polishing systems and speeds on the surface roughness of resin composites. J Conserv Dent JCD. 2023;26(1):36.
  • Ertas E, Gueler AU, Yuecel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006;25(2):371-376.
  • Paolone G, Formiga S, De Palma F, et al. Color stability of resin-based composites: Staining procedures with liquids-a narrative review. J Esthet Restor Dent. 2022;34(6):865-887.
  • Korkut B, Haciali C. Color stability of flowable composites in different viscosities. Clin Exp Health Sci. 2020;10(4):454-461.
  • Meshki R, Rashidi M. Effect of natural and commercially produced juices on colour stability of microhybrid and nanohybrid composites. BDJ Open. 2022;8(1):11.
  • Hatirli H, Tonga G, Boyraz Ş. Water sorption, solubility and color stability of different bulk-fill restorative materials. Cumhur Dent J. 2022;25(4):293-301.
  • Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent. 2012;40:e57-e63.
  • Amalavathy RK, Sahoo HS, Shivanna S, Lingaraj J, Aravinthan S. Staining effect of various beverages on and surface nano-hardness of a resin coated and a non-coated fluoride releasing tooth-coloured restorative material: An in-vitro study. Heliyon. 2020;6(6):e04345
Toplam 21 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Restoratif Diş Tedavisi
Bölüm Orijinal Makale
Yazarlar

Özge Çeliksöz 0000-0002-4879-3631

Hatice Tepe 0000-0003-4744-5691

Batucan Yaman 0000-0003-4295-0760

Erken Görünüm Tarihi 28 Ekim 2023
Yayımlanma Tarihi 29 Ekim 2023
Yayımlandığı Sayı Yıl 2023 Cilt: 6 Sayı: 6

Kaynak Göster

AMA Çeliksöz Ö, Tepe H, Yaman B. Evaluation of color stability of bulk-fill restorative materials with different properties. J Health Sci Med /JHSM /jhsm. Ekim 2023;6(6):1360-1365. doi:10.32322/jhsm.1347899

Üniversitelerarası Kurul (ÜAK) Eşdeğerliği:  Ulakbim TR Dizin'de olan dergilerde yayımlanan makale [10 PUAN] ve 1a, b, c hariç  uluslararası indekslerde (1d) olan dergilerde yayımlanan makale [5 PUAN]

Dahil olduğumuz İndeksler (Dizinler) ve Platformlar sayfanın en altındadır.

Not:
Dergimiz WOS indeksli değildir ve bu nedenle Q olarak sınıflandırılmamıştır.

Yüksek Öğretim Kurumu (YÖK) kriterlerine göre yağmacı/şüpheli dergiler hakkındaki kararları ile yazar aydınlatma metni ve dergi ücretlendirme politikasını tarayıcınızdan indirebilirsiniz. https://dergipark.org.tr/tr/journal/2316/file/4905/show 


Dergi Dizin ve Platformları

Dizinler; ULAKBİM TR Dizin, Index Copernicus, ICI World of Journals, DOAJ, Directory of Research Journals Indexing (DRJI), General Impact Factor, ASOS Index, WorldCat (OCLC), MIAR, EuroPub, OpenAIRE, Türkiye Citation Index, Türk Medline Index, InfoBase Index, Scilit, vs.

Platformlar; Google Scholar, CrossRef (DOI), ResearchBib, Open Access, COPE, ICMJE, NCBI, ORCID, Creative Commons vs.