Araştırma Makalesi
PDF Zotero Mendeley EndNote BibTex Kaynak Göster

Effect of Different Repolishing Procedures on The Color Change of Alkasite

Yıl 2022, Cilt 25, Sayı Supplement, 37 - 41, 25.03.2022
https://doi.org/10.7126/cumudj.1032492

Öz

Objectives: An esthetic restoration with an unacceptable color is the main cause for replacement of anterior tooth restorations. The aim of this study is to evaluate the effect of repolishing on the color change of the new material group of alkasite after exposure to coffee solution. Materials and Methods: Alkasite material placed in Teflon molds with a diameter of 8 mm and a height of 2 mm was polymerized under the application of mylar strip and a total of 32 samples were obtained. The samples were randomly immersion into groups. Group R: Diamond grained polishing rubbers, Group D: Aluminum oxide discs are applied and the polishing process is completed. After the first color measurement was made, it was immersed in coffee and the measurement was repeated 1 week later. L was divided into two groups (n=8) and repolished with rubber (RR) and discs (RD). In the D group, re-polishing was done with rubber (DR) and disc (DD) and color measurements were repeated. Results were analyzed by using one-way ANOVA and Tukey test at 95% confidence interval. Results: The greatest color change (ΔE00) was in group R. At the end of seven days, similar color change values were found between the groups of R and D (p > 0.05). There is no difference between the RR and RD groups. Significantly less color change was observed in the DD group than in the RR and RD groups (p = .003, p = .042, respectively). Similarly, the DR group showed less color change than the RR group (p = .015). Conclusions: The color stability of the alkasite was affected by the polishing procedure. The repolishing process reduced the color change, but not at a clinically acceptable level.

Kaynakça

  • 1. Ren Y-F, Feng L, Serban D, Malmstrom HS.Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. J Dent 2012; 40: e48-e56.
  • 2. Samanta S, Das UK, Mitra A. Comparison of microleakage in class V cavity restored with flowable composite resin, glass ionomer cement and cention N. Imp J Interdiscip Res 2017; 3: 180-183.
  • 3. Meshram P, Meshram V, Palve D, Patil S, Gade V, Raut A. Comparative evaluation of microleakage around Class V cavities restored with alkasite restorative material with and without bonding agent and flowable composite resin: An in vitro study. Indian J Dent Res 2019; 30: 403.
  • 4. Ruengrungsom C, Burrow MF, Parashos P, Palamara JE. Evaluation of F, Ca, and P release and microhardness of eleven ion-leaching restorative materials and the recharge efficacy using a new Ca/P containing fluoride varnish. J Dent 2020; 102: 103474.
  • 5. Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM.Effects of staining and bleaching on color change of dental composite resins.J Prosthet Dent 2006.;95: 137-142.
  • 6. Gupta R, Parkash H, Shah N, Jain V. A spectrophotometric evaluation of color changes of various tooth colored veneering materials after exposure to commonly consumed beverages. The J Indian Prosthodont Soc 2005; 5: 72.
  • 7. Satou N, Khan A, Matsumae I, Satou J, Shintani H. In vitro color change of composite-based resins. Dent Mater 1989;5: 384-387.
  • 8. Fontes ST, Fernández MR, Moura CMd, Meireles SS. Color stability of a nanofill composite: effect of different immersion media. J Appl Oral Sci 2009;17:388-91
  • 9. Lu H, Roeder LB, Lei L, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent 2005;17(2):102-8
  • 10. Bagheri R, Burrow M, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
  • 11. Patel SB, Gordan VV, Barrett AA, Shen C. The effect of surface finishing and storage solutions on the color stability of resin-based composites. J Am Dent Assoc 2004;135(5):587-94.
  • 12. Aydin N, Karaoğlanoğlu S, Oktay EA, Ersöz B. İlave Polisaj Uygulamasının Kompozit Rezinlerin Yüzey Pürüzlülüğü ve Renk Değişimine Etkisinin İncelenmesi. Turkiye Klinikleri J Dental Sci 2021;27(3).
  • 13. Salas M, Lucena C, Herrera LJ, Yebra A, Della Bona A, Pérez MM. Translucency thresholds for dental materials. Dent Mater 2018;34:1168-74.
  • 14. Morgan M. Finishing and polishing of direct posterior resin restorations. Pract Proced Aesthet DenT 2004;16:211-34.
  • 15. Barakah HM, Taher NM. Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material. J Prosthet Dent 2014;112:625-31.
  • 16. Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent 2012;40:e57-e63.
  • 17. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
  • 18. Ertas E, Gueler AU, Yuecel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J 2006;25:371-376.
  • 19. Gómez-Polo C, Muñoz MP, Luengo MCL, Vicente P, Galindo P, Casado AMM. Comparison of the CIELab and CIEDE2000 color difference formulas. J Prosthet Dent 2016;115:65-70.
  • 20. Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27:S1-S9.
  • 21. Paravina RD, Roeder L, Lu H, Vogel K, Powers JM. Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites. Am J Dent 2004;17:262-6.
  • 22. Jung M, Eichelberger K, Klimek J. Surface geometry of four nanofiller and one hybrid composite after one-step and multiple-step polishing. Oper Dent 2007;32:347-55.
  • 23. Flury S, Diebold E, Peutzfeldt A, Lussi A. Effect of artificial toothbrushing and water storage on the surface roughness and micromechanical properties of tooth-colored CAD-CAM materials. J Prosthet Dent 2017;117:767-74.
  • 24. Ergücü, Z., L.S. Türkün, and A. Aladag, Color stability of nanocomposites polished with one-step systems. Oper Dent 2008:33: 413-420.
  • 25. Mundim, F.M., L.d.F.R. Garcia, and F.d.C.P. Pires-de-Souza, Effect of staining solutions and repolishing on color stability of direct composites. J Appl Oral Sci 2010;18:249-254.
  • 26. Türkün, L.Ş. and M. Türkün, Effect of bleaching and repolishing procedures on coffee and tea stain removal from three anterior composite veneering materials. . J Esthet Restor Dent 2004;16: 290-301.
  • 27. Garoushi S, Lassila L, Hatem M, Shembesh M, Baady L, Salim Z, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontologica Scandinavica, 2013; 71:144-150.
  • 28. Rodrigues C, Nora BD, Mallmann A, May L, Jacques L. Repolishing resin composites after bleaching treatments: effects on color stability and smoothness. Oper Dent 2019; 44: 54-64.

FARKLI TEKRAR CİLALAMA PROSEDÜRLERİNİN ALKASİTİN RENK DEĞİŞİMİ ÜZERİNE ETKİSİ

Yıl 2022, Cilt 25, Sayı Supplement, 37 - 41, 25.03.2022
https://doi.org/10.7126/cumudj.1032492

Öz

AMAÇ: Bu çalışmanın amacı yeni bir materyal grubu olan alkasitin kahve solüsyonuna maruz kalmasından sonra tekrar cilalama yapılmasının oluşan renk değişimine etkisini değerlendirmektir. YÖNTEM: 8 mm çapında ve 2 mm yüksekliğinde teflon kalıplar içerisine yerleştirilen alkasit materyali mylar strip uygulaması altında polimerize edildi ve toplam 32 adet örnek elde edildi. Örnekler rastgele gruba ayrıldı. Grup1: Elmas grenli polisaj lastikleri (L), Grup2: Aliminyum oksit diskleri(D) uygulanarak polisaj işlemi tamamlandı. İlk renk ölçümü yapıldıktan sonra kahveye daldırıldı ve 1 hafta sonra ölçüm tekrarlandı. L kendi içinde iki grubu ayrılarak(n=8) lastik (LL) ve diskler (LD) ile yeniden polisaj işlemi uygulandı. D grubunada lastik (DL) ve disk (DD) ile yeniden polisaj yapıldı ve renk ölçümleri tekrarlandı. Bulgular tek yönlü ANOVA ve Tukey testi kullanılarak %95 güven aralığında analiz edildi. BULGULAR: En fazla renk değişimi (ΔE00) L’de olmuştur. 1 haftanın sonunda L ve D grupları arasında benzer renk değişiklik değerleri bulunmuştur (p> .05). LL ve LD grupları arasında fark yoktur. DD grubunda LL ve LD gruplarına göre önemli derecede daha az renk değişimi gözlendi (p = .003, p = .042, sırasıyla) Benzer şekilde, DL grubu LL grubuna göre daha az renk değişimi göstermiştir (p = .015). SONUÇ: Alkasitin renk stabilitesi polisaj prosedüründen etkilenmiştir. Tekrar cilalama işlemi renk değişimini azaltsa da klinik olarak kabul edilebilir seviyelere getirememiştir.

Kaynakça

  • 1. Ren Y-F, Feng L, Serban D, Malmstrom HS.Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. J Dent 2012; 40: e48-e56.
  • 2. Samanta S, Das UK, Mitra A. Comparison of microleakage in class V cavity restored with flowable composite resin, glass ionomer cement and cention N. Imp J Interdiscip Res 2017; 3: 180-183.
  • 3. Meshram P, Meshram V, Palve D, Patil S, Gade V, Raut A. Comparative evaluation of microleakage around Class V cavities restored with alkasite restorative material with and without bonding agent and flowable composite resin: An in vitro study. Indian J Dent Res 2019; 30: 403.
  • 4. Ruengrungsom C, Burrow MF, Parashos P, Palamara JE. Evaluation of F, Ca, and P release and microhardness of eleven ion-leaching restorative materials and the recharge efficacy using a new Ca/P containing fluoride varnish. J Dent 2020; 102: 103474.
  • 5. Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM.Effects of staining and bleaching on color change of dental composite resins.J Prosthet Dent 2006.;95: 137-142.
  • 6. Gupta R, Parkash H, Shah N, Jain V. A spectrophotometric evaluation of color changes of various tooth colored veneering materials after exposure to commonly consumed beverages. The J Indian Prosthodont Soc 2005; 5: 72.
  • 7. Satou N, Khan A, Matsumae I, Satou J, Shintani H. In vitro color change of composite-based resins. Dent Mater 1989;5: 384-387.
  • 8. Fontes ST, Fernández MR, Moura CMd, Meireles SS. Color stability of a nanofill composite: effect of different immersion media. J Appl Oral Sci 2009;17:388-91
  • 9. Lu H, Roeder LB, Lei L, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent 2005;17(2):102-8
  • 10. Bagheri R, Burrow M, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
  • 11. Patel SB, Gordan VV, Barrett AA, Shen C. The effect of surface finishing and storage solutions on the color stability of resin-based composites. J Am Dent Assoc 2004;135(5):587-94.
  • 12. Aydin N, Karaoğlanoğlu S, Oktay EA, Ersöz B. İlave Polisaj Uygulamasının Kompozit Rezinlerin Yüzey Pürüzlülüğü ve Renk Değişimine Etkisinin İncelenmesi. Turkiye Klinikleri J Dental Sci 2021;27(3).
  • 13. Salas M, Lucena C, Herrera LJ, Yebra A, Della Bona A, Pérez MM. Translucency thresholds for dental materials. Dent Mater 2018;34:1168-74.
  • 14. Morgan M. Finishing and polishing of direct posterior resin restorations. Pract Proced Aesthet DenT 2004;16:211-34.
  • 15. Barakah HM, Taher NM. Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material. J Prosthet Dent 2014;112:625-31.
  • 16. Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent 2012;40:e57-e63.
  • 17. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
  • 18. Ertas E, Gueler AU, Yuecel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J 2006;25:371-376.
  • 19. Gómez-Polo C, Muñoz MP, Luengo MCL, Vicente P, Galindo P, Casado AMM. Comparison of the CIELab and CIEDE2000 color difference formulas. J Prosthet Dent 2016;115:65-70.
  • 20. Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27:S1-S9.
  • 21. Paravina RD, Roeder L, Lu H, Vogel K, Powers JM. Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites. Am J Dent 2004;17:262-6.
  • 22. Jung M, Eichelberger K, Klimek J. Surface geometry of four nanofiller and one hybrid composite after one-step and multiple-step polishing. Oper Dent 2007;32:347-55.
  • 23. Flury S, Diebold E, Peutzfeldt A, Lussi A. Effect of artificial toothbrushing and water storage on the surface roughness and micromechanical properties of tooth-colored CAD-CAM materials. J Prosthet Dent 2017;117:767-74.
  • 24. Ergücü, Z., L.S. Türkün, and A. Aladag, Color stability of nanocomposites polished with one-step systems. Oper Dent 2008:33: 413-420.
  • 25. Mundim, F.M., L.d.F.R. Garcia, and F.d.C.P. Pires-de-Souza, Effect of staining solutions and repolishing on color stability of direct composites. J Appl Oral Sci 2010;18:249-254.
  • 26. Türkün, L.Ş. and M. Türkün, Effect of bleaching and repolishing procedures on coffee and tea stain removal from three anterior composite veneering materials. . J Esthet Restor Dent 2004;16: 290-301.
  • 27. Garoushi S, Lassila L, Hatem M, Shembesh M, Baady L, Salim Z, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontologica Scandinavica, 2013; 71:144-150.
  • 28. Rodrigues C, Nora BD, Mallmann A, May L, Jacques L. Repolishing resin composites after bleaching treatments: effects on color stability and smoothness. Oper Dent 2019; 44: 54-64.

Ayrıntılar

Birincil Dil İngilizce
Konular Sağlık Bilimleri ve Hizmetleri
Yayınlanma Tarihi Kış
Bölüm Original Research Articles
Yazarlar

Seda Nur KARAKAŞ (Sorumlu Yazar)
CUKUROVA UNIVERSITY, FACULTY OF DENTISTRY, DENTISTRY PR.
0000-0003-4843-939X
Türkiye


Cihan KÜDEN
CUKUROVA UNIVERSITY, FACULTY OF DENTISTRY
0000-0002-2663-9828
Türkiye

Yayımlanma Tarihi 25 Mart 2022
Başvuru Tarihi 5 Aralık 2021
Kabul Tarihi 14 Şubat 2022
Yayınlandığı Sayı Yıl 2022, Cilt 25, Sayı Supplement

Kaynak Göster

EndNote %0 Cumhuriyet Dental Journal Effect of Different Repolishing Procedures on The Color Change of Alkasite %A Seda Nur Karakaş , Cihan Küden %T Effect of Different Repolishing Procedures on The Color Change of Alkasite %D 2022 %J Cumhuriyet Dental Journal %P 1302-5805-2146-2852 %V 25 %N Supplement %R doi: 10.7126/cumudj.1032492 %U 10.7126/cumudj.1032492

Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.


CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.

Frequency: Four times a year (March, June, September, and December)

IMPORTANT NOTICE

All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.

Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.