Araştırma Makalesi
PDF Mendeley EndNote BibTex Kaynak Göster

Effect of Modelıng Liquid Use on Color and Whiteness Index Change of Composite Resins

Yıl 2022, Cilt 25, Sayı Supplement, 119 - 123, 25.03.2022
https://doi.org/10.7126/cumudj.1031443

Öz

Objective: Composite resins are widely used in the restoration of teeth. The aim of this study is to examine the effect of modeling liquid use on the color and whiteness index changes of composite resins. Materials and Methods: In the study, samples were prepared using different composite resins (Clearfil Majesty Esthetic, Estelite Asteria, G-aenial A'Chord and Omnichroma). Before polymerization of the prepared samples, modeling liquid was applied to one group with a composite brush, while modeling liquid was not applied to the other group. After the polymerization process, the samples were polished using the finishing and polishing system (Clearfil Twist Dia). Color measurement of samples kept in coffee was measured at the beginning, at 7th and 30th days using spectrophotometer. CIEDE2000 (ΔE00) and whiteness index (WID) formulas were used to calculate color changes. Statistical analysis of the data was performed with one-way analysis of variance (ANOVA) and Tukey tests (p>0.05). Results: There was a statistically significant difference between the color and whiteness index change values of the composite resins on the 7th and 30th days (p<0.05). There was no statistically significant difference between the color and whiteness index change values of the composite resins with and without modeling liquid (p>0.05). The control group, which did not undergo finishing and polishing, showed the statistically highest color change (p>0.05). Conclusions: Composite resins showed change in color (ΔE00:1.8) and whiteness index (ΔWID:2.6) above the acceptable threshold value (AT) in coffee. The use of modeling liquid did not affect the color and whiteness index changes of the composite resins.

Kaynakça

  • 1. Ferracane JL. Resin composite-state of the art. Dent Mater 2011; 27:29-38.
  • 2. Nahsan FP, Mondelli RF, Franco EB, Naufel FS, Ueda JK, Schmitt VL, Baseggio W. Clinical strategies for esthetic excellence in anterior tooth restorations: understanding color and composite resin selection. J Appl Oral Sci 2012; 20:151-156.
  • 3. Dunn WJ, Strong TC. Effect of alcohol and unfilled resin in the incremental buildup of resin composite. Quintessence Int 2007;38: 20-26.
  • 4. Sedrez-Porto JA, Münchow EA, Brondani LP, Cenci MS, Pereira-Cenci T. Effects of modeling liquid/resin and polishing on the color change of resin composite. Braz Oral Res 2016; 30:1-9.
  • 5. Kutuk ZB, Erden E, Aksahin DL, Durak ZE, Dulda AC. Influence of modeling agents on the surface properties of an esthetic nano-hybrid composite. Restor Dent Endod 2020;45(2):e13.
  • 6. Bayraktar ET, Atali PY, Korkut B, Kesimli EG, Tarcin B, Turkmen C. Effect of modeling resins on microhardness of resin composites. Eur J Dent 2021;15:481-487.
  • 7. Patel SB, Gordan VV, Barrett AA, Shen C. The effect of surface finishing and storage solutions on the color stability of resinbased composites. J Am Dent Assoc 2004; 135:587-594.
  • 8. Bagheri R, Burrow MF, Tyas M. Influence of food simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005; 33:389 398.
  • 9. Fontes ST, Fernández MR, de Moura CM, Meireles SS. Color stability of a nanofilll composite: Effect of different immersion media. J Appl Oral Sci 2009; 17:388 391.
  • 10. Aydın N, Karaoglanoglu S, Oktay EA, Kılıçarslan MA. Investigating the color changes on resin-based CAD/CAM blocks. J Esthet Restor Dent. 2020; 32:251-256.
  • 11. Iyer RS, Babani VR, Yaman P, Dennison J. Color match using instrumental and visual methods for single, group, and multi-shade composite resins. J Esthet Restor Dent. 2021; 33:394-400.
  • 12. Sharma G, Wu W, Dalal E. The CIEDE2000 color-difference formula: implementation notes, supplementary test data, and mathematical observations. Color Res Appl 2005; 30:21-30.
  • 13. Pérez Mdel M, Ghinea R, Rivas MJ, et al. Development of a customized whiteness index for dentistry based on CIELAB color space. Dent Mater 2016; 32:461-467.
  • 14. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent 2019; 31:1-10.
  • 15. Sedrez-Porto JA, Munchow EA, Brondani LP, Cenci MS, Pereira-Cenci T. Effects of modeling liquid/resin and polishing on the color change of resin composite. Braz Oral Res 2016; 30: e88.
  • 16. Tuncer S, Demirci M, Tiryaki M, Unlu N, Uysal O. The effect of a modeling resin and thermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent 2013; 25: 404-419.
  • 17. Lopes GC, Vieira LC, Araujo E. Direct composite resin restorations: A review of some clinical procedures to achieve predictable results in posterior teeth. J Esthet Restor Dent 2004; 16:19-32.
  • 18. Aytac F, Karaarslan EŞ, Agaccıoglu M, et al. Effects of novel finishing and polishing systems on surface roughness and morphology of nanocomposites. J Esthet Restor Dent 2016; 28:247-261.
  • 19. Aydın N, Topçu FT, Karaoğlanoğlu S, Oktay EA, Erdemir U. Effect of finishing and polishing systems on the surface roughness and color change of composite resins. J Clin Exp Dent. 2021; 13:446-454.
  • 20. Nasim I, Neelakantan P, Sujeer R, Subbarao CV. Color stability of microfilled, microhybrid and nanocomposite resins-an in vitro study. J Dent 2010;38: 137-142.
  • 21. Ardu S, Duc O, Di Bella E, Krejci I. Color stability of recent composite resins. Odontology. 2017; 105:29–35.
  • 22. Ardu S, Braut V, Gutemberg D, et al. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010; 41:695-702.
  • 23. Pereira Sanchez N, Powers JM, Paravina RD. Instrumental and visual evaluation of the color adjustment potential of resin composites. J Esthet Restor Dent 2019; 31:465-470.
  • 24. de Abreu JLB, Sampaio CS, Benalcázar Jalkh EB, Hirata R. Analysis of the color matching of universal resin composites in anterior restorations. J Esthet Restor Dent 2021; 32:269-276.
  • 25. Durand LB, Ruiz-López J, Perez BG, Ionescu AM, Carrillo-Pérez F, Ghinea R, et al. Color, lightness, chroma, hue, and translucency adjustment potential of resin composites using CIEDE2000 color difference formula. J Esthet Restor Dent 2021;33:836-843.
  • 26. Soederholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. J Dent Res 1984;63 :1248-1254.
  • 27. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials 2003; 24: 655-665.
  • 28. Sedrez-Porto JA, Munchow EA, Cenci MS, Pereira-Cenci T. Translucency and color stability of resin composite and dental adhesives as modeling liquids- A one-year evaluation. Braz Oral Res 2017; 31: e54.
  • 29. Munchow EA, Sedrez-Porto JA, Piva E, Pereira-Cenci T, Cenci MS. Use of dental adhesives as modeler liquid of resin composites. Dent Mater 2016; 32: 570-577.
  • 30. Sulaiman TA, Rodgers B, Suliman AA, Johnston WM. Color and translucency stability of contemporary resin-based restorative materials. J Esthet Restor Dent. 2021; 33:899-905.

Yıl 2022, Cilt 25, Sayı Supplement, 119 - 123, 25.03.2022
https://doi.org/10.7126/cumudj.1031443

Öz

Kaynakça

  • 1. Ferracane JL. Resin composite-state of the art. Dent Mater 2011; 27:29-38.
  • 2. Nahsan FP, Mondelli RF, Franco EB, Naufel FS, Ueda JK, Schmitt VL, Baseggio W. Clinical strategies for esthetic excellence in anterior tooth restorations: understanding color and composite resin selection. J Appl Oral Sci 2012; 20:151-156.
  • 3. Dunn WJ, Strong TC. Effect of alcohol and unfilled resin in the incremental buildup of resin composite. Quintessence Int 2007;38: 20-26.
  • 4. Sedrez-Porto JA, Münchow EA, Brondani LP, Cenci MS, Pereira-Cenci T. Effects of modeling liquid/resin and polishing on the color change of resin composite. Braz Oral Res 2016; 30:1-9.
  • 5. Kutuk ZB, Erden E, Aksahin DL, Durak ZE, Dulda AC. Influence of modeling agents on the surface properties of an esthetic nano-hybrid composite. Restor Dent Endod 2020;45(2):e13.
  • 6. Bayraktar ET, Atali PY, Korkut B, Kesimli EG, Tarcin B, Turkmen C. Effect of modeling resins on microhardness of resin composites. Eur J Dent 2021;15:481-487.
  • 7. Patel SB, Gordan VV, Barrett AA, Shen C. The effect of surface finishing and storage solutions on the color stability of resinbased composites. J Am Dent Assoc 2004; 135:587-594.
  • 8. Bagheri R, Burrow MF, Tyas M. Influence of food simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005; 33:389 398.
  • 9. Fontes ST, Fernández MR, de Moura CM, Meireles SS. Color stability of a nanofilll composite: Effect of different immersion media. J Appl Oral Sci 2009; 17:388 391.
  • 10. Aydın N, Karaoglanoglu S, Oktay EA, Kılıçarslan MA. Investigating the color changes on resin-based CAD/CAM blocks. J Esthet Restor Dent. 2020; 32:251-256.
  • 11. Iyer RS, Babani VR, Yaman P, Dennison J. Color match using instrumental and visual methods for single, group, and multi-shade composite resins. J Esthet Restor Dent. 2021; 33:394-400.
  • 12. Sharma G, Wu W, Dalal E. The CIEDE2000 color-difference formula: implementation notes, supplementary test data, and mathematical observations. Color Res Appl 2005; 30:21-30.
  • 13. Pérez Mdel M, Ghinea R, Rivas MJ, et al. Development of a customized whiteness index for dentistry based on CIELAB color space. Dent Mater 2016; 32:461-467.
  • 14. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent 2019; 31:1-10.
  • 15. Sedrez-Porto JA, Munchow EA, Brondani LP, Cenci MS, Pereira-Cenci T. Effects of modeling liquid/resin and polishing on the color change of resin composite. Braz Oral Res 2016; 30: e88.
  • 16. Tuncer S, Demirci M, Tiryaki M, Unlu N, Uysal O. The effect of a modeling resin and thermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent 2013; 25: 404-419.
  • 17. Lopes GC, Vieira LC, Araujo E. Direct composite resin restorations: A review of some clinical procedures to achieve predictable results in posterior teeth. J Esthet Restor Dent 2004; 16:19-32.
  • 18. Aytac F, Karaarslan EŞ, Agaccıoglu M, et al. Effects of novel finishing and polishing systems on surface roughness and morphology of nanocomposites. J Esthet Restor Dent 2016; 28:247-261.
  • 19. Aydın N, Topçu FT, Karaoğlanoğlu S, Oktay EA, Erdemir U. Effect of finishing and polishing systems on the surface roughness and color change of composite resins. J Clin Exp Dent. 2021; 13:446-454.
  • 20. Nasim I, Neelakantan P, Sujeer R, Subbarao CV. Color stability of microfilled, microhybrid and nanocomposite resins-an in vitro study. J Dent 2010;38: 137-142.
  • 21. Ardu S, Duc O, Di Bella E, Krejci I. Color stability of recent composite resins. Odontology. 2017; 105:29–35.
  • 22. Ardu S, Braut V, Gutemberg D, et al. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010; 41:695-702.
  • 23. Pereira Sanchez N, Powers JM, Paravina RD. Instrumental and visual evaluation of the color adjustment potential of resin composites. J Esthet Restor Dent 2019; 31:465-470.
  • 24. de Abreu JLB, Sampaio CS, Benalcázar Jalkh EB, Hirata R. Analysis of the color matching of universal resin composites in anterior restorations. J Esthet Restor Dent 2021; 32:269-276.
  • 25. Durand LB, Ruiz-López J, Perez BG, Ionescu AM, Carrillo-Pérez F, Ghinea R, et al. Color, lightness, chroma, hue, and translucency adjustment potential of resin composites using CIEDE2000 color difference formula. J Esthet Restor Dent 2021;33:836-843.
  • 26. Soederholm KJ, Zigan M, Ragan M, Fischlschweiger W, Bergman M. Hydrolytic degradation of dental composites. J Dent Res 1984;63 :1248-1254.
  • 27. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials 2003; 24: 655-665.
  • 28. Sedrez-Porto JA, Munchow EA, Cenci MS, Pereira-Cenci T. Translucency and color stability of resin composite and dental adhesives as modeling liquids- A one-year evaluation. Braz Oral Res 2017; 31: e54.
  • 29. Munchow EA, Sedrez-Porto JA, Piva E, Pereira-Cenci T, Cenci MS. Use of dental adhesives as modeler liquid of resin composites. Dent Mater 2016; 32: 570-577.
  • 30. Sulaiman TA, Rodgers B, Suliman AA, Johnston WM. Color and translucency stability of contemporary resin-based restorative materials. J Esthet Restor Dent. 2021; 33:899-905.

Ayrıntılar

Birincil Dil İngilizce
Konular Sağlık Bilimleri ve Hizmetleri
Yayınlanma Tarihi Kış
Bölüm Original Research Articles
Yazarlar

Numan AYDIN (Sorumlu Yazar)
University of Health Sciences, Gulhane Faculty of Dentistry, Department of Restorative Dental Treatment
0000-0001-8628-4507
Türkiye


Serpil KARAOĞLANOĞLU
UNIVERSITY OF HEALTH SCIENCES, GÜLHANE FACULTY OF DENTISTRY (ANKARA)
0000-0003-0601-8028
Türkiye


Bilge ERSÖZ
UNIVERSITY OF HEALTH SCIENCES, GÜLHANE FACULTY OF DENTISTRY (ANKARA)
0000-0003-0769-0457
Türkiye

Destekleyen Kurum yok
Yayımlanma Tarihi 25 Mart 2022
Başvuru Tarihi 2 Aralık 2021
Kabul Tarihi 16 Mart 2022
Yayınlandığı Sayı Yıl 2022, Cilt 25, Sayı Supplement

Kaynak Göster

EndNote %0 Cumhuriyet Dental Journal Effect of Modelıng Liquid Use on Color and Whiteness Index Change of Composite Resins %A Numan Aydın , Serpil Karaoğlanoğlu , Bilge Ersöz %T Effect of Modelıng Liquid Use on Color and Whiteness Index Change of Composite Resins %D 2022 %J Cumhuriyet Dental Journal %P 1302-5805-2146-2852 %V 25 %N Supplement %R doi: 10.7126/cumudj.1031443 %U 10.7126/cumudj.1031443

Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.


CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.

Frequency: Four times a year (March, June, September, and December)

IMPORTANT NOTICE

All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.

Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.