BibTex RIS Kaynak Göster

Comparison of the effect of thermal stresses on tooth-colored posts, cores and tooth structures by finite element analysis

Yıl 2012, Cilt: 15 Sayı: 2, 118 - 129, 19.04.2012
https://doi.org/10.7126/cdj.2012.1092

Öz

Objectives: The aims of this study were to analyze the influence of cold heat flow in all ceramic crown material, composite core, zirconium and glass fiber reinforced composite post materials, resin based luting cement and root dentin; and to compare these two tooth-colored post systems about their temperature and thermal stress distributions.
Materials and Methods: A 3-dimesional finite element model of maxillary left canine tooth was constructed. All ceramic crown, composite core, tooth dentin, post and bone were modeled. In the first part of this study, initial body temperature was assumed to be 36.5°C and the outer temperature was reduced to 0°C for 5 secs. In the second part, the thermal stress was calculated as a result of temperature change. For the analysis, 7 nodes of the finite element model were selected and heat flow, temperature and thermal stres on these nodes were evaluated.
Results: Mean temperature value was 15.75 °C for GFRC post model and 15.47 °C for Zr post model. The maximum von Mises stress was obtained at the node C in both post systems. In general, thermal stress was observed on the cervical part of all-ceramic crown and there was an interface between root dentin-composite core and post material. The temperature gradient of the GFRC post was smaller than that of the zirconia post.
Conclusions: Within the limitation of this study, zirconia posts produced greater stress than GFRC posts. Temperature changes had more effect on the post-cement interface and cervical areas than on the other areas.

Kaynakça

  • Bateman G, Ricketts DNJ, Saunders WP. Fibre-based post systems: A review. Br Dent J 2003;195:43-48. CrossRef]
  • Deutsch AS, Musikant BL, Cavallari J, Lepley JB. Prefabricated dowels: A literature review. J Prosthet Dent ;49:498-503.[CrossRef] Qualtrough AJ, Mannocci F. Tooth- colored post systems: a review. Oper Dent 2003;28(1):86-91.
  • Macedo VC, Faria e Silva AL, Martins LR. Effect of cement type, relining procedure, and length of cementation on pull-out bond strength of fiber posts. J Endod ;36(9):1543-1546.[CrossRef] Wrbas
  • Schirrmeister JF, Bitter K, Kielbassa AM. Effect of adhesive resin cements and post surface silanization on the bond strengths of adhesively inserted fiber posts. J Endod ;33(7):840-843.[CrossRef] Cohen BI, Pagnillo MK, Condos S, Deutsch AS. Four different core materials measured for fracture strength in combination with five different designs of endodontic posts. J Prosthet Dent 1996;76:487-495. CrossRef]
  • Yang HS, Lang LA, Guckes AD, Felton DA. The effect of thermal change on various dowel-and-core restorative materials. J Prosthet Dent ;86(1):74-80.[CrossRef] Major VA. Wheeler’s Atlas of tooth form. 5th ed. Philladelphia: Saunders Company; 1984.
  • Toparli M, Sasaki S. Finite element analysis of the temperature and thermal stress in a postrestored tooth. J Oral Rehabil 2003;30(9):921-926. CrossRef]
  • Toparli M, Gökay N, Aksoy T. An investigation of temperature and stress distribution on a restored maxillary second premolar tooth using a three-dimensional finite element method. J Oral Rehabil. ;27(12):1077-1081.[CrossRef]
  • Güngör MA, Küçük M, Dündar M, Karaoğlu C, Artunç C. Effect of temperature and stress distribution on all-ceramic restorations by using a three-dimensional finite element analysis. ;31(2):172-178.[CrossRef] Lenz J, Kessel S. Thermal stresses in metal-ceramic specimens for the ISO crack initiation test (three-point flexure bond test). Dent Mater ;14(4):277-280.[CrossRef] Braden M. Heat conduction in teeth and the effect of lining materials. J Dent Res 1964;43:315.[CrossRef]
  • Hood JAA. Biomechanics of intact, prepared and restored tooth: some clinical implications. Int Dent J ;41:25. Spierings THAM, De Vree JHP, Peters MCRB, Plasschaert AJM. The influence of restorative dental materials on heat transmission in human ;14:1096.[CrossRef]
  • Spierings THM, Peters MCRB, Bosman F, Plasschaert AJM. The influence of transmission in restored teeth. J Dent Res 1986;14:47.[CrossRef]
  • Anusavice KJ, Hojjatie B. Influence of incisal length of ceramic and loading distribution in ceramic crowns. J Dent Res 1988;67:1371.[CrossRef]
  • Mitsui FH, Marchi GM, Pimenta LA, Ferraresi PM. In vitro study of fracture resistance of bovine roots using different intraradicular post systems. Quintessence Int 2004; :612-616.
  • Tezvergil A, Lassila LV, Vallittu PK. The effect of fiber orientation on the polymerization shrinkage strain of fiber-reinforced composites. Dent Mater CrossRef] Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 1992;67:325-327. CrossRef]
  • Oilo G. The extent of slits at the interfaces between luting cements and enamel, dentin and alloy. Acta Odontol Scand 1978;36:257-261. CrossRef] Dent Res cavity on heat orientation on stress ;22(7):610-616.
Yıl 2012, Cilt: 15 Sayı: 2, 118 - 129, 19.04.2012
https://doi.org/10.7126/cdj.2012.1092

Öz

Kaynakça

  • Bateman G, Ricketts DNJ, Saunders WP. Fibre-based post systems: A review. Br Dent J 2003;195:43-48. CrossRef]
  • Deutsch AS, Musikant BL, Cavallari J, Lepley JB. Prefabricated dowels: A literature review. J Prosthet Dent ;49:498-503.[CrossRef] Qualtrough AJ, Mannocci F. Tooth- colored post systems: a review. Oper Dent 2003;28(1):86-91.
  • Macedo VC, Faria e Silva AL, Martins LR. Effect of cement type, relining procedure, and length of cementation on pull-out bond strength of fiber posts. J Endod ;36(9):1543-1546.[CrossRef] Wrbas
  • Schirrmeister JF, Bitter K, Kielbassa AM. Effect of adhesive resin cements and post surface silanization on the bond strengths of adhesively inserted fiber posts. J Endod ;33(7):840-843.[CrossRef] Cohen BI, Pagnillo MK, Condos S, Deutsch AS. Four different core materials measured for fracture strength in combination with five different designs of endodontic posts. J Prosthet Dent 1996;76:487-495. CrossRef]
  • Yang HS, Lang LA, Guckes AD, Felton DA. The effect of thermal change on various dowel-and-core restorative materials. J Prosthet Dent ;86(1):74-80.[CrossRef] Major VA. Wheeler’s Atlas of tooth form. 5th ed. Philladelphia: Saunders Company; 1984.
  • Toparli M, Sasaki S. Finite element analysis of the temperature and thermal stress in a postrestored tooth. J Oral Rehabil 2003;30(9):921-926. CrossRef]
  • Toparli M, Gökay N, Aksoy T. An investigation of temperature and stress distribution on a restored maxillary second premolar tooth using a three-dimensional finite element method. J Oral Rehabil. ;27(12):1077-1081.[CrossRef]
  • Güngör MA, Küçük M, Dündar M, Karaoğlu C, Artunç C. Effect of temperature and stress distribution on all-ceramic restorations by using a three-dimensional finite element analysis. ;31(2):172-178.[CrossRef] Lenz J, Kessel S. Thermal stresses in metal-ceramic specimens for the ISO crack initiation test (three-point flexure bond test). Dent Mater ;14(4):277-280.[CrossRef] Braden M. Heat conduction in teeth and the effect of lining materials. J Dent Res 1964;43:315.[CrossRef]
  • Hood JAA. Biomechanics of intact, prepared and restored tooth: some clinical implications. Int Dent J ;41:25. Spierings THAM, De Vree JHP, Peters MCRB, Plasschaert AJM. The influence of restorative dental materials on heat transmission in human ;14:1096.[CrossRef]
  • Spierings THM, Peters MCRB, Bosman F, Plasschaert AJM. The influence of transmission in restored teeth. J Dent Res 1986;14:47.[CrossRef]
  • Anusavice KJ, Hojjatie B. Influence of incisal length of ceramic and loading distribution in ceramic crowns. J Dent Res 1988;67:1371.[CrossRef]
  • Mitsui FH, Marchi GM, Pimenta LA, Ferraresi PM. In vitro study of fracture resistance of bovine roots using different intraradicular post systems. Quintessence Int 2004; :612-616.
  • Tezvergil A, Lassila LV, Vallittu PK. The effect of fiber orientation on the polymerization shrinkage strain of fiber-reinforced composites. Dent Mater CrossRef] Palmer DS, Barco MT, Billy EJ. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 1992;67:325-327. CrossRef]
  • Oilo G. The extent of slits at the interfaces between luting cements and enamel, dentin and alloy. Acta Odontol Scand 1978;36:257-261. CrossRef] Dent Res cavity on heat orientation on stress ;22(7):610-616.
Toplam 14 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Original Research Articles
Yazarlar

Ferhan Egilmez

Levent Nalbant

Yayımlanma Tarihi 19 Nisan 2012
Gönderilme Tarihi 25 Ekim 2011
Yayımlandığı Sayı Yıl 2012Cilt: 15 Sayı: 2

Kaynak Göster

EndNote Egilmez F, Nalbant L (01 Nisan 2012) Comparison of the effect of thermal stresses on tooth-colored posts, cores and tooth structures by finite element analysis. Cumhuriyet Dental Journal 15 2 118–129.

Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.


CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.

Frequency: Four times a year (March, June, September, and December)

IMPORTANT NOTICE

All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.

Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.