Araştırma Makalesi
BibTex RIS Kaynak Göster

Comparative Investigation of Mechanical Properties of Ball Attachment Manufactured from Different Alloys and Surface Improvement Processes

Yıl 2023, Cilt: 26 Sayı: 4, 399 - 416, 31.12.2023

Gizem Gülmez Oguzhan Gorler

https://doi.org/10.7126/cumudj.1408885

Öz

The retaining system commonly used in overdenture prostheses is the ball attachments, which are deformed over time, which can affect the retention and stability of the prosthesis. The aim of this study is to research the physical properties of the ball attachments which are made of different alloys and used for surface treatment. In our study, ball attachments produced from different alloys (Grade 4, Grade 5, Grade 23, CoCr) and applied various surface treatments (no surface treatment, anodisation, micro-arc oxidation coating) were used. Samples were prepared in the laboratory environment and exposed to the thermal cycle, which corresponds to a 5-year aging process, by means of chewing simulators. The changes in the surface properties of the ball attachments as a result of the aging process were evaluted with scanning electron microscopy (SEM-EDX) and X-ray diffractometry (XRD). Considering that the deformation in the matrix and the patrix would affect the retention resistance, tensile bond strength test was applied in a universal test device to measure this resistance. Values were recorded in Newtons and Megapascals. In order to detect the wear on the patrix, weight measurements were made on precision scales. Values were recorded in milligrams (mg). The data were analysed using the SPSS programme. As a result, loss of retention and wear were observed on all ball attachments and matrix. Retention and weight loss were seen the most in the titanium grade 4 group and the least in the CoCr group. No significant difference was found between the other groups.

Anahtar Kelimeler

Ball attachment grade 4 titanium grade 5 titanium grade 23 titanium CoCr edx xrd Tensile Strength sem

Kaynakça

  • Allen PF and McMillan AS. A review of the functional and psychosocial outcomes of edentulousness treated with complete replacement dentures. Journal of the Canadian Dental Association, 69(10), 662, 2003.
  • Mojon P, Thomason JM, Walls AW, The impact of falling rates of edentulism. Int J Prosthodont., Jul-Aug;17(4):434-440, 2004.
  • Petersen PE, The World Oral Health Report 2003: continious improvement of oral health in the 21st century- the approach of the WHO Global Oral Health Programme. Community Dent Oral Epidemiol., Dec;31(1):3-23, 2003.
  • Douglass CW, Shih A, Ostry L, Will there be a need for complete dentures in the United States in 2020?. J Prosthet Dent., Jan;87(1):5-8, 2002.
  • Gökalp S, Doğan GB, Tekçiçek M, Berberoğlu A, Ünlüer Ş, Oral and Dental Health Profile in Adults and the Elderly. Journal of Hacettepe Faculty of Dentistry, September;31(4):11-18, 2007.
  • Doundoulakis JH, Eckert SE, Lindquist CC, Jeffcoat MK, The implant-supported overdenture as an alternative to the complete mandibular denture. J Am Dent Assoc., Nov;134(11):1455-1458, 2003.
  • Van Waas MA, The influence of clinical variables on patients' satisfaction with complete dentures. J Prosthet Dent., Mar;63(3):307-310, 1990.
  • Bakke M, Holm B, Gotfredsen K. Masticatory function and patient satisfaction with implant-supported mandibular overdentures: A prospective 5-year study. Int J Prosthodont., Nov-Dec;15(6):575-581, 2002.
  • Sadowsky SJ. Mandibular implant-retained overdentures: A literature review. J Prosthet Dent., Nov;86(5):468-473, 2001.
  • Watson RM, Jemt T, Chai J, Harnett J, Prosthodontic treatment, patient response, and the need for maintenance of complete implant-supported overdentures: an appraisal of 5 years of prospective study. Int J Prosthodont., Jul-Aug;10(4):345-354, 1997.
  • Van Kampen FM, Van Der Bilt A, Cune MS, Fontijn-Tekamp FA, Bosman F, Masticatory function with implant-supported overdentures. J Dent Res., Sep;83(9):708-711, 2004.
  • Allen PF, McMillan AS, Walshaw D, A patient-based assessment of implant-stabilised and conventional complete dentures. J Prosthet Dent, Feb;85(2):141-147, 2001.
  • Naert I, Alsaadi G, Quirynen M, Prosthetic aspects and patient satisfaction with two-implant-retained mandibular overdentures: A 10-year randomized clinical study. J Prosthet Dent., Aug;93(2);182, 2005.
  • Feine JS, Carlsson GE, Awad MA, Chehade A, Duncan WJ, The McGill consensus statement on overdentures. Mandibular two-implant overdentures as first choice standard of care for edentulous patients. Int J Oral Maxillofac Implant., Jul;(17):601-602, 2002.
  • Cune MS, de Putter C, Hoogstraten J, Treatment outcome with implant-retained overdentures: Part II-Patient satisfaction and predictability of subjective treatment outcome. J Prosthet Dent., Aug;72(2):152-158, 1994. 1 Naert I, Quirynen M, Theuniers G, van Steenberghe D, Prosthetic aspects of osseointegrated fixtures supporting overdentures. A 4-year report. J Prosthet Dent., May;65(5):671-680, 1991.
  • Geçkili O, Bural C, Bilmenoğlu Ç, Attachment systems for implant supported complete dentures. J Ege Univ Sch Dent., 31:9-18, 2010.
  • Bayer S, Steinheuser D, Grüner M, Keilig L, Enkling N, Stark H, Mues S, Comparative study of four retentive anchor systems for implant supported overdentures - Retention force changes. Gerodontology, Dec;26(4):268-272, 2009.
  • Misch CE. Dental Implant Prostheses. Nobel Medical Bookstore 1st Edition, p.228-232, 2009.
  • Landa LS, Cho SC, Froum SJ, Elian N, Tarnow DP, A prospective 2-year clinical evaluation of overdentures attached to nonsplinted implants utilising ERA attachments. Pract Proced Aesthet Dent., Mar;13(2):151-156, 2001.
  • Mericske-Stern RD, Taylor TD, Belser U, Management of the edentulous patient. Clin Oral Implants Res., 11(1):108-125, 2000.
  • Parel SM, Implants and overdentures: The osseointegrated approach with conventional and compromised applications. Int J Oral Maxillofac Implant., Fall;1(2):93-99, 1986.
  • Zarb GA, Bolender CL, Eckert SE et al., Prosthodontic Treatment for Edentulous Patients: Complete Dentures and Implant-Supported Prostheses, Michigan, 2004.
  • Chung KH, Chung CY, Cagna DR, Cronin RJ, Retention characteristics of attachment systems for implant overdentures. J Prosthodont., Dec;13(4):221- 226, 2004.
  • Evtimovska E, Masri R, Driscoll CF, Romberg E, The change in retentive values of locator attachments and hader clips over time. J Prosthodont., Aug;18(6):479-483, 2009.
  • Pigozzo MN, Mesquita MF, Henriques GE, Vaz LG. The service life of implant-retained overdenture attachment systems. J Prosthet Dent., Aug;102(2):74-80, 2009.
  • Kobayashi M, Srinivasan M, Ammann P, vd. Effects of in vitro cyclic dislodging on retentive force and removal torque of three overdenture attachment systems. Clin Oral Implants Res., Apr;25(4):426-434, 2014.
  • Botega DM, Mesquita MF, Henriques GEP, Vaz LG. Retention force and fatigue strength of overdenture attachment systems. J Oral Rehabil., Sep;31(9):884-889, 2004.
  • Abi Nader S, De Souza RF, Fortin D, De Koninck L, Fromentin O, Albuquerque Junior RF. Effect of simulated masticatory loading on the retention of stud attachments for implant overdentures. J Oral Rehabil., Mar;38(3):157-164, 2011.
  • Marin DOM, Leite ARP, Oliveira Junior NM, Paleari AG, Pero AC, Compagnoni MA. Retention Force and Wear Characteristics of three Attachment Systems after Dislodging Cycles. Brazilian dental journal, 29, 6, 576-582, 2018.
  • Choi JW, Yun BH, Jeong CM, Huh JB. Retentive Properties of Two Stud Attachments with Polyetherketoneketone or Nylon Insert in Mandibular Implant Overdentures. The International journal of oral & maxillofacial implants, 33, 5, 1079-1088, 2018.
  • Fakhry A, Tan SC, Heiner AD, Dehkordi-Vakil FH, Dircks HW. Methodology for measuring the in vitro seating and unseating forces of prefabricated attachment systems used to retain implant overdentures. Journal of prosthodontics: official journal of the American College of Prosthodontists, 19, 2, 87-94, 2010.
  • Sadig W. A comparative in vitro study on the retention and stability of implant- supported overdentures. Quintessence Int (Berl)., Apr;40(4):313-319, 2009.
  • Fromentin O, Lassauzay C, Abi Nader S, Feine J, De Albuquerque Junior RF. Testing the retention of attachments for implant overdentures - Validation of an original force measurement system. J Oral Rehabil., Jan;37(1):54-62, 2010.
  • Setz I, Lee SH, Engel E. Retention of prefabricated attachments for implant stabilized overdentures in the edentulous mandible: an in vitro study. J Prosthet Dent., Sep;80(3):323-329.,1998.
  • Nagaoka E, Nagayasu Y, Yamashita H, Matsushiro H, Okuno Y, Study of retention in attachments for overdenture (II) O-ring attachment. J Osaka Univ Dent Sch., Dec;20:215-226, 1980.
  • Kobayashi M, Srinivasan M, Ammann P, vd. Effects of in vitro cyclic dislodging on retentive force and removal torque of three overdenture attachment systems. Clin Oral Implants Res., Apr;25(4):426-434, 2014.
  • You W, Masri R, Romberg E, Driscoll CF, You T. The effect of denture cleansing solutions on the retention of pink locator attachments after multiple pulls: an in vitro study. J Prosthodont, 20:464-469, 2011.
  • Besimo CE, Guarneri A. In vitro retention force changes of prefabricated attachments for overdentures. J Oral Rehabil., Jul;30(7):671-678, 2003.
  • Rodrigues RC, Faria AC, Macedo AP, Sartori IA, de Mattos Mda G, Ribeiro RF. An in vitro study of non-axial forces upon the retention of an O-ring attachment. Clinical oral implants research, 20, 12, 1314-1319, 2009.
  • Kurtulus IL, Gurbulak AG. The In Vitro comparison of the retention of an implant-supported stud attachment locator and straumann ball attachment at different angulations. Nigerian journal of clinical practice, 21, 5, 639-644, 2018.
  • Alsabeeha N, Atieh M, Swain MV, Payne AG. Attachment systems for mandibular single-implant overdentures: an in vitro retention force investigation on different designs. The International journal of prosthodontics, 23, 2, 160-166, 2010.
  • Svetlize CA, Bodereau EF, Jr. Comparative study of retentive anchor systems for overdentures. Quintessence international (Berlin, Germany: 1985), 35, 6, 443-448, 2004.
  • Sultana N, Bartlett DW, Suleiman M. Retention of implant-supported overdentures at different implant angulations: comparing Locator and ball attachments. Clinical oral implants research, 28, 11, 1406-1410, 2017.
  • Ortegón SM, Thompson GA, Agar JR, Taylor TD, Perdikis D. Retention forces of spherical at tachments as a function of implant and matrix angulation in mandibular overdentures: An in vitro study Army Dental and Trauma Research Detachment, Great Lakes, III; J Prosthet Dent., Apr; 101(4):231-238,2009.
  • Minguez-Tomas N, Alonso-Perez-Barquero J, Fernandez-Estevan L, Vicente-Escuder A, Selva-Otaolaurruchi EJ. In vitro retention capacity of two overdenture attachment systems: Locator(R) and Equator(R). Journal of clinical and experimental dentistry, 10, 7, e681-e686, 2018.
  • Gulizio MP, Agar JR, Kelly JR, Taylor TD. Effect of Implant Angulation upon Retention of Overdenture Attachments. Mar;14(1):3-11,2005.
  • Passia N, Ghazal M, Kern M. Long-term retention behaviour of resin matrix attachment systems for overdentures. Journal of the mechanical behavior of biomedical materials, 57, 88-94, 2016.
  • Yang TC, Maeda Y, Gonda T, Kotecha S. Attachment systems for implant overdenture: influence of implant inclination on retentive and lateral forces. Clinical oral implants research, 22, 11, 1315-1319, 2011.
  • Gonuldas F, Tokar E, Ozturk C. Evaluation of the retention characteristics of various stud attachment systems for implant retained overdenture. Acta of bioengineering and biomechanics, 20, 4, 135-141, 2018.
  • Trakas T, Michalakis K, Kang K ve Hirayama H. Attachment systems for implant retained overdentures: a literature review. Implant Dentistry, 15(1), 24- 34, 2006.
  • Al-Ghafli SA, Michalakis KX, Hirayama H, Kang K. The in vitro effect of different implant angulations and cyclic dislodgement on the retentive properties of an overdenture attachment system. The Journal of prosthetic dentistry, 102, 3, 140-147, 2009.
  • Yabul A, Dayan C, Geckili O, Bilhan H, Tuncer N. Evaluation of volumetric wear of abutments on the retention loss of ball attachment systems in implant- retained overdentures: An in vitro study. Clinical implant dentistry and related research, 20, 5, 778-784, 2018.
  • Wolf K, Ludwig K, Hartfil H, Kern M. Analysis of retention and wear of ball attachments. Quintessence Int, 40:405-412, 2009.
  • Saito M, Kanazawa M, Takahashi H, Uo M, Minakuchi S. Trend of change in retentive force for bar attachments with different materials. The Journal of prosthetic dentistry, 112, 6, 1545-1552, 2014.
  • Williams BH, Ochiai KT, Hojo S, Nishimura R, Caputo AA. Retention of maxillary implant overdenture bars of different designs. J Prosthet Dent., Dec;86(6):603-607, 2001.
  • Lehmann KM, Amin F. Studies on the retention forces of snap-on attachments. Quintessence Dent Technol, 7:45–48, 1978.
  • Burns DR, Unger JW, Elswick RK, Beck DA. Prospective clinical evaluation of mandibular implant overdentures: Part I-retention, stability, and tissue response. J Prosthet Dent., Apr.73(4):354-363, 1995.

Yıl 2023, Cilt: 26 Sayı: 4, 399 - 416, 31.12.2023

Gizem Gülmez Oguzhan Gorler

https://doi.org/10.7126/cumudj.1408885

Öz

Kaynakça

  • Allen PF and McMillan AS. A review of the functional and psychosocial outcomes of edentulousness treated with complete replacement dentures. Journal of the Canadian Dental Association, 69(10), 662, 2003.
  • Mojon P, Thomason JM, Walls AW, The impact of falling rates of edentulism. Int J Prosthodont., Jul-Aug;17(4):434-440, 2004.
  • Petersen PE, The World Oral Health Report 2003: continious improvement of oral health in the 21st century- the approach of the WHO Global Oral Health Programme. Community Dent Oral Epidemiol., Dec;31(1):3-23, 2003.
  • Douglass CW, Shih A, Ostry L, Will there be a need for complete dentures in the United States in 2020?. J Prosthet Dent., Jan;87(1):5-8, 2002.
  • Gökalp S, Doğan GB, Tekçiçek M, Berberoğlu A, Ünlüer Ş, Oral and Dental Health Profile in Adults and the Elderly. Journal of Hacettepe Faculty of Dentistry, September;31(4):11-18, 2007.
  • Doundoulakis JH, Eckert SE, Lindquist CC, Jeffcoat MK, The implant-supported overdenture as an alternative to the complete mandibular denture. J Am Dent Assoc., Nov;134(11):1455-1458, 2003.
  • Van Waas MA, The influence of clinical variables on patients' satisfaction with complete dentures. J Prosthet Dent., Mar;63(3):307-310, 1990.
  • Bakke M, Holm B, Gotfredsen K. Masticatory function and patient satisfaction with implant-supported mandibular overdentures: A prospective 5-year study. Int J Prosthodont., Nov-Dec;15(6):575-581, 2002.
  • Sadowsky SJ. Mandibular implant-retained overdentures: A literature review. J Prosthet Dent., Nov;86(5):468-473, 2001.
  • Watson RM, Jemt T, Chai J, Harnett J, Prosthodontic treatment, patient response, and the need for maintenance of complete implant-supported overdentures: an appraisal of 5 years of prospective study. Int J Prosthodont., Jul-Aug;10(4):345-354, 1997.
  • Van Kampen FM, Van Der Bilt A, Cune MS, Fontijn-Tekamp FA, Bosman F, Masticatory function with implant-supported overdentures. J Dent Res., Sep;83(9):708-711, 2004.
  • Allen PF, McMillan AS, Walshaw D, A patient-based assessment of implant-stabilised and conventional complete dentures. J Prosthet Dent, Feb;85(2):141-147, 2001.
  • Naert I, Alsaadi G, Quirynen M, Prosthetic aspects and patient satisfaction with two-implant-retained mandibular overdentures: A 10-year randomized clinical study. J Prosthet Dent., Aug;93(2);182, 2005.
  • Feine JS, Carlsson GE, Awad MA, Chehade A, Duncan WJ, The McGill consensus statement on overdentures. Mandibular two-implant overdentures as first choice standard of care for edentulous patients. Int J Oral Maxillofac Implant., Jul;(17):601-602, 2002.
  • Cune MS, de Putter C, Hoogstraten J, Treatment outcome with implant-retained overdentures: Part II-Patient satisfaction and predictability of subjective treatment outcome. J Prosthet Dent., Aug;72(2):152-158, 1994. 1 Naert I, Quirynen M, Theuniers G, van Steenberghe D, Prosthetic aspects of osseointegrated fixtures supporting overdentures. A 4-year report. J Prosthet Dent., May;65(5):671-680, 1991.
  • Geçkili O, Bural C, Bilmenoğlu Ç, Attachment systems for implant supported complete dentures. J Ege Univ Sch Dent., 31:9-18, 2010.
  • Bayer S, Steinheuser D, Grüner M, Keilig L, Enkling N, Stark H, Mues S, Comparative study of four retentive anchor systems for implant supported overdentures - Retention force changes. Gerodontology, Dec;26(4):268-272, 2009.
  • Misch CE. Dental Implant Prostheses. Nobel Medical Bookstore 1st Edition, p.228-232, 2009.
  • Landa LS, Cho SC, Froum SJ, Elian N, Tarnow DP, A prospective 2-year clinical evaluation of overdentures attached to nonsplinted implants utilising ERA attachments. Pract Proced Aesthet Dent., Mar;13(2):151-156, 2001.
  • Mericske-Stern RD, Taylor TD, Belser U, Management of the edentulous patient. Clin Oral Implants Res., 11(1):108-125, 2000.
  • Parel SM, Implants and overdentures: The osseointegrated approach with conventional and compromised applications. Int J Oral Maxillofac Implant., Fall;1(2):93-99, 1986.
  • Zarb GA, Bolender CL, Eckert SE et al., Prosthodontic Treatment for Edentulous Patients: Complete Dentures and Implant-Supported Prostheses, Michigan, 2004.
  • Chung KH, Chung CY, Cagna DR, Cronin RJ, Retention characteristics of attachment systems for implant overdentures. J Prosthodont., Dec;13(4):221- 226, 2004.
  • Evtimovska E, Masri R, Driscoll CF, Romberg E, The change in retentive values of locator attachments and hader clips over time. J Prosthodont., Aug;18(6):479-483, 2009.
  • Pigozzo MN, Mesquita MF, Henriques GE, Vaz LG. The service life of implant-retained overdenture attachment systems. J Prosthet Dent., Aug;102(2):74-80, 2009.
  • Kobayashi M, Srinivasan M, Ammann P, vd. Effects of in vitro cyclic dislodging on retentive force and removal torque of three overdenture attachment systems. Clin Oral Implants Res., Apr;25(4):426-434, 2014.
  • Botega DM, Mesquita MF, Henriques GEP, Vaz LG. Retention force and fatigue strength of overdenture attachment systems. J Oral Rehabil., Sep;31(9):884-889, 2004.
  • Abi Nader S, De Souza RF, Fortin D, De Koninck L, Fromentin O, Albuquerque Junior RF. Effect of simulated masticatory loading on the retention of stud attachments for implant overdentures. J Oral Rehabil., Mar;38(3):157-164, 2011.
  • Marin DOM, Leite ARP, Oliveira Junior NM, Paleari AG, Pero AC, Compagnoni MA. Retention Force and Wear Characteristics of three Attachment Systems after Dislodging Cycles. Brazilian dental journal, 29, 6, 576-582, 2018.
  • Choi JW, Yun BH, Jeong CM, Huh JB. Retentive Properties of Two Stud Attachments with Polyetherketoneketone or Nylon Insert in Mandibular Implant Overdentures. The International journal of oral & maxillofacial implants, 33, 5, 1079-1088, 2018.
  • Fakhry A, Tan SC, Heiner AD, Dehkordi-Vakil FH, Dircks HW. Methodology for measuring the in vitro seating and unseating forces of prefabricated attachment systems used to retain implant overdentures. Journal of prosthodontics: official journal of the American College of Prosthodontists, 19, 2, 87-94, 2010.
  • Sadig W. A comparative in vitro study on the retention and stability of implant- supported overdentures. Quintessence Int (Berl)., Apr;40(4):313-319, 2009.
  • Fromentin O, Lassauzay C, Abi Nader S, Feine J, De Albuquerque Junior RF. Testing the retention of attachments for implant overdentures - Validation of an original force measurement system. J Oral Rehabil., Jan;37(1):54-62, 2010.
  • Setz I, Lee SH, Engel E. Retention of prefabricated attachments for implant stabilized overdentures in the edentulous mandible: an in vitro study. J Prosthet Dent., Sep;80(3):323-329.,1998.
  • Nagaoka E, Nagayasu Y, Yamashita H, Matsushiro H, Okuno Y, Study of retention in attachments for overdenture (II) O-ring attachment. J Osaka Univ Dent Sch., Dec;20:215-226, 1980.
  • Kobayashi M, Srinivasan M, Ammann P, vd. Effects of in vitro cyclic dislodging on retentive force and removal torque of three overdenture attachment systems. Clin Oral Implants Res., Apr;25(4):426-434, 2014.
  • You W, Masri R, Romberg E, Driscoll CF, You T. The effect of denture cleansing solutions on the retention of pink locator attachments after multiple pulls: an in vitro study. J Prosthodont, 20:464-469, 2011.
  • Besimo CE, Guarneri A. In vitro retention force changes of prefabricated attachments for overdentures. J Oral Rehabil., Jul;30(7):671-678, 2003.
  • Rodrigues RC, Faria AC, Macedo AP, Sartori IA, de Mattos Mda G, Ribeiro RF. An in vitro study of non-axial forces upon the retention of an O-ring attachment. Clinical oral implants research, 20, 12, 1314-1319, 2009.
  • Kurtulus IL, Gurbulak AG. The In Vitro comparison of the retention of an implant-supported stud attachment locator and straumann ball attachment at different angulations. Nigerian journal of clinical practice, 21, 5, 639-644, 2018.
  • Alsabeeha N, Atieh M, Swain MV, Payne AG. Attachment systems for mandibular single-implant overdentures: an in vitro retention force investigation on different designs. The International journal of prosthodontics, 23, 2, 160-166, 2010.
  • Svetlize CA, Bodereau EF, Jr. Comparative study of retentive anchor systems for overdentures. Quintessence international (Berlin, Germany: 1985), 35, 6, 443-448, 2004.
  • Sultana N, Bartlett DW, Suleiman M. Retention of implant-supported overdentures at different implant angulations: comparing Locator and ball attachments. Clinical oral implants research, 28, 11, 1406-1410, 2017.
  • Ortegón SM, Thompson GA, Agar JR, Taylor TD, Perdikis D. Retention forces of spherical at tachments as a function of implant and matrix angulation in mandibular overdentures: An in vitro study Army Dental and Trauma Research Detachment, Great Lakes, III; J Prosthet Dent., Apr; 101(4):231-238,2009.
  • Minguez-Tomas N, Alonso-Perez-Barquero J, Fernandez-Estevan L, Vicente-Escuder A, Selva-Otaolaurruchi EJ. In vitro retention capacity of two overdenture attachment systems: Locator(R) and Equator(R). Journal of clinical and experimental dentistry, 10, 7, e681-e686, 2018.
  • Gulizio MP, Agar JR, Kelly JR, Taylor TD. Effect of Implant Angulation upon Retention of Overdenture Attachments. Mar;14(1):3-11,2005.
  • Passia N, Ghazal M, Kern M. Long-term retention behaviour of resin matrix attachment systems for overdentures. Journal of the mechanical behavior of biomedical materials, 57, 88-94, 2016.
  • Yang TC, Maeda Y, Gonda T, Kotecha S. Attachment systems for implant overdenture: influence of implant inclination on retentive and lateral forces. Clinical oral implants research, 22, 11, 1315-1319, 2011.
  • Gonuldas F, Tokar E, Ozturk C. Evaluation of the retention characteristics of various stud attachment systems for implant retained overdenture. Acta of bioengineering and biomechanics, 20, 4, 135-141, 2018.
  • Trakas T, Michalakis K, Kang K ve Hirayama H. Attachment systems for implant retained overdentures: a literature review. Implant Dentistry, 15(1), 24- 34, 2006.
  • Al-Ghafli SA, Michalakis KX, Hirayama H, Kang K. The in vitro effect of different implant angulations and cyclic dislodgement on the retentive properties of an overdenture attachment system. The Journal of prosthetic dentistry, 102, 3, 140-147, 2009.
  • Yabul A, Dayan C, Geckili O, Bilhan H, Tuncer N. Evaluation of volumetric wear of abutments on the retention loss of ball attachment systems in implant- retained overdentures: An in vitro study. Clinical implant dentistry and related research, 20, 5, 778-784, 2018.
  • Wolf K, Ludwig K, Hartfil H, Kern M. Analysis of retention and wear of ball attachments. Quintessence Int, 40:405-412, 2009.
  • Saito M, Kanazawa M, Takahashi H, Uo M, Minakuchi S. Trend of change in retentive force for bar attachments with different materials. The Journal of prosthetic dentistry, 112, 6, 1545-1552, 2014.
  • Williams BH, Ochiai KT, Hojo S, Nishimura R, Caputo AA. Retention of maxillary implant overdenture bars of different designs. J Prosthet Dent., Dec;86(6):603-607, 2001.
  • Lehmann KM, Amin F. Studies on the retention forces of snap-on attachments. Quintessence Dent Technol, 7:45–48, 1978.
  • Burns DR, Unger JW, Elswick RK, Beck DA. Prospective clinical evaluation of mandibular implant overdentures: Part I-retention, stability, and tissue response. J Prosthet Dent., Apr.73(4):354-363, 1995.
Toplam 57 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Protez
Bölüm Original Research Articles
Yazarlar

Gizem Gülmez 0000-0002-8821-4489

Oguzhan Gorler 0000-0001-6545-8811

Yayımlanma Tarihi 31 Aralık 2023
Gönderilme Tarihi 23 Aralık 2023
Kabul Tarihi 26 Aralık 2023
Yayımlandığı Sayı Yıl 2023Cilt: 26 Sayı: 4

Kaynak Göster

EndNote Gülmez G, Gorler O (01 Aralık 2023) Comparative Investigation of Mechanical Properties of Ball Attachment Manufactured from Different Alloys and Surface Improvement Processes. Cumhuriyet Dental Journal 26 4 399–416.
 Kapak Resmi İndir

Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.


CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.

Frequency: Four times a year (March, June, September, and December)

IMPORTANT NOTICE

All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.

Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.