Öz
Kaybedilen diş dokusunun yerine konulmasında metal destekli seramik restorasyonlar, geçmişten günümüze başarıyla kullanılmaktadır. Ancak hastaların estetik restoratif malzemelere olan ilgilerinin artması ile birlikte, metal destekli seramik restorasyonlar yerlerini hızla daha estetik olan restoratif malzemelere bırakmaktadır [1].
Tam seramik restorasyonlar metal destekli seramik restorasyonlar ile karşılaştırıldığında daha üstün estetik özelliklere sahiptir [2, 3]. Bununla beraber mükemmel biyouyumluluk, düşük plak tutulumu, periodontal dokularda daha az hasar oluşturma potansiyeli ve metal alt yapının kullanılmaması ile daha az alerji oluşturma riskine sahiptirler [4, 5].
Uzun zamanlar başarıları tam olarak kanıtlanmış restoratif tekniklere alternatif olarak hergün yeni teknikler geliştirilmektedir. Materyalin kuvvetlendirilmesi amacıyla porselen yapısı değişikliğe uğramakta ve daha dayanıklı porselen materyalleri geliştirilmektedir. Zirkonyum gren çapının düşük olması ve yüksek gerilme direncine sahip olması nedenli diş hekimliğinde porselen materyali içerisinde kullanılmaya başlanmıştır.
Anahtar Kelimeler
Kaynakça
- Höland W. Biocompatible And Bioactive Glass-Ceramics - State Of The Art And New Directions. Journal of Non-Crystalline Solids 1997;219:192-197.
- Fradeani M, Redemagni M. An 11- year clinical evaluation of leucite- reinforced glass-ceramic crowns: a retrospective study. Quintessence Int 2002;33:503-10.
- Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent Mater 2003;19:603-11.
- Sorensen J. The IPS Empress 2 system: defining the possibilities. Quintessence Dent Technol 1999;22:153-163.
- Fasbinder DJ. Restorative material options for CAD/CAM restorations. Compend Contin Educ Dent, 2002; 23:911-6, 918, 920, 924.
- Haselton DR, Diaz-Arnold AM, Hillis SL. Clinical assessment of high-strength all-ceramic crowns. J Prosthet Dent 2000; 83:396-401.
- Xiao-ping L, Jie-mo T, Yun-long Z, Ling W. Strength and fracture toughness of MgO-modified glass infiltrated alumina for CAD/CAM. Dent Mater 2002;18:216-20.
- Broschure V. VITA In-Ceram Alumina. Directions for use Fabrication of the framework In the slip-casting technique. 2005.
- Magen P, Besler U. Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic. Int J Prosthodont, 1997;10:459-466.
- Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide- partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil, 2004;31:682-8.
- Uludamar A, Akalin B, Kulak Ozkan Y. Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları. Cumhuriyet Dent J 2014;14:140-153.
- Guazzato M, Albakry M, Swain MV, Ironside J. Mechanical properties of In-Ceram Alumina and In- Ceram Zirconia. Int J Prosthodont 2002;15:339-46.
- Denissen HW, Van der Zel JM, Van Waas M. Measurement of the margins of partial-coverage tooth preparations for CAD/CAM. Int J Prosthodont 1999;12:395-400.
- Van der Zel JM, Vlaar S, De Ruiter W, Davidson C. The CICERO system for CAD/CAM fabrication of full-ceramic crowns. J Prosthet Dent 2001;5:261-7.
- Denissen H, Dozic A, Van der Zel J, Van Waas M. Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays. J Prosthet Dent 2000; 84:506-13.
- Andresson M, Oden A. A new all- ceramic crown. A dense sintered, high-purity alumina copings with porcelain. Acta Odontol Scand 1993; 51:59-64.
- Andersson M, Razzoog ME, Oden A, Hegenbarth EA, Lang BR. Procera: a new way to achieve an all-ceramic crown. Quintessence Int 1998;29:285-96.
- Facts ES. Lava All Ceramic System Technical Product Profile, 3M ESPE.2007.
- Barnfather KD, Brunton PA. Restoration of the upper dental arch using Lava all- ceramic crown and bridgework. Br Dent J 2007;202:731-5.
- Brochure C. CAD/CAM Congress. Dentsply Prosthetics. 2007.
- Vult von Steyern P, Carlson P, Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study. J Oral Rehabil 2005;32:180-7.
- Tinschert J, Schulze KA, Natt G, Latzke P, Heussen N, Spiekermann H. Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont 2008;21:217-22.
- Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307.
- Giordano RA. CAD/CAM: overview of machines and materials. J Mass Dent Soc 2002;51:12-5.
- Sjolin R, Sundh A, Bergman M. The Decim system for the production of dental restorations. Int J Comput Dent 1999;2:197-207.
- Eidenbenz S, Lehner CR, Scharer P. Copy milling ceramic inlays from resin analogs: a practicable approach with the CELAY system. Int J Prosthodont 1994;7:134-42.
- Mörmann W, Brandestini M. The fundemental inventive principles of CEREC CAD/CAM. In:Mörmann WH State of the Art of CAD/CAM Restorations: 20 Years of CEREC. Quintessence Berlin, 2006;1-7.
- Kelly J. Machinable ceramics. In: Mörmann WH State of the Art of CAD/CAM Restorations: 20 Years of CEREC. Quintessence Berlin. 2006; 29-38.
- Brochure K. CAD/CAM System and Everest Elements. 2009.
- Brochure W. ZENOTEC System components. 2009.
- Catalog, Z. Human Zirconium Technology. 2009.
Öz
Kaynakça
- Höland W. Biocompatible And Bioactive Glass-Ceramics - State Of The Art And New Directions. Journal of Non-Crystalline Solids 1997;219:192-197.
- Fradeani M, Redemagni M. An 11- year clinical evaluation of leucite- reinforced glass-ceramic crowns: a retrospective study. Quintessence Int 2002;33:503-10.
- Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent Mater 2003;19:603-11.
- Sorensen J. The IPS Empress 2 system: defining the possibilities. Quintessence Dent Technol 1999;22:153-163.
- Fasbinder DJ. Restorative material options for CAD/CAM restorations. Compend Contin Educ Dent, 2002; 23:911-6, 918, 920, 924.
- Haselton DR, Diaz-Arnold AM, Hillis SL. Clinical assessment of high-strength all-ceramic crowns. J Prosthet Dent 2000; 83:396-401.
- Xiao-ping L, Jie-mo T, Yun-long Z, Ling W. Strength and fracture toughness of MgO-modified glass infiltrated alumina for CAD/CAM. Dent Mater 2002;18:216-20.
- Broschure V. VITA In-Ceram Alumina. Directions for use Fabrication of the framework In the slip-casting technique. 2005.
- Magen P, Besler U. Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic. Int J Prosthodont, 1997;10:459-466.
- Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide- partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil, 2004;31:682-8.
- Uludamar A, Akalin B, Kulak Ozkan Y. Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları. Cumhuriyet Dent J 2014;14:140-153.
- Guazzato M, Albakry M, Swain MV, Ironside J. Mechanical properties of In-Ceram Alumina and In- Ceram Zirconia. Int J Prosthodont 2002;15:339-46.
- Denissen HW, Van der Zel JM, Van Waas M. Measurement of the margins of partial-coverage tooth preparations for CAD/CAM. Int J Prosthodont 1999;12:395-400.
- Van der Zel JM, Vlaar S, De Ruiter W, Davidson C. The CICERO system for CAD/CAM fabrication of full-ceramic crowns. J Prosthet Dent 2001;5:261-7.
- Denissen H, Dozic A, Van der Zel J, Van Waas M. Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays. J Prosthet Dent 2000; 84:506-13.
- Andresson M, Oden A. A new all- ceramic crown. A dense sintered, high-purity alumina copings with porcelain. Acta Odontol Scand 1993; 51:59-64.
- Andersson M, Razzoog ME, Oden A, Hegenbarth EA, Lang BR. Procera: a new way to achieve an all-ceramic crown. Quintessence Int 1998;29:285-96.
- Facts ES. Lava All Ceramic System Technical Product Profile, 3M ESPE.2007.
- Barnfather KD, Brunton PA. Restoration of the upper dental arch using Lava all- ceramic crown and bridgework. Br Dent J 2007;202:731-5.
- Brochure C. CAD/CAM Congress. Dentsply Prosthetics. 2007.
- Vult von Steyern P, Carlson P, Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study. J Oral Rehabil 2005;32:180-7.
- Tinschert J, Schulze KA, Natt G, Latzke P, Heussen N, Spiekermann H. Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont 2008;21:217-22.
- Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307.
- Giordano RA. CAD/CAM: overview of machines and materials. J Mass Dent Soc 2002;51:12-5.
- Sjolin R, Sundh A, Bergman M. The Decim system for the production of dental restorations. Int J Comput Dent 1999;2:197-207.
- Eidenbenz S, Lehner CR, Scharer P. Copy milling ceramic inlays from resin analogs: a practicable approach with the CELAY system. Int J Prosthodont 1994;7:134-42.
- Mörmann W, Brandestini M. The fundemental inventive principles of CEREC CAD/CAM. In:Mörmann WH State of the Art of CAD/CAM Restorations: 20 Years of CEREC. Quintessence Berlin, 2006;1-7.
- Kelly J. Machinable ceramics. In: Mörmann WH State of the Art of CAD/CAM Restorations: 20 Years of CEREC. Quintessence Berlin. 2006; 29-38.
- Brochure K. CAD/CAM System and Everest Elements. 2009.
- Brochure W. ZENOTEC System components. 2009.
- Catalog, Z. Human Zirconium Technology. 2009.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Bölüm | Review |
| Yazarlar | |
| Yayımlanma Tarihi | 6 Ağustos 2014 |
| Gönderilme Tarihi | 8 Ağustos 2012 |
| Yayımlandığı Sayı | Yıl 2014 |
Cited By
Contemporary dental materials
Advanced Technologies
Milena Kostić
https://doi.org/10.5937/SavTeh1901078K
Comparison of surface roughness of dental materials as an adhesion factor of oral biofilm
Acta stomatologica Naissi
Milena Kostić
https://doi.org/10.5937/asn1980956S
Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.
CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.
Frequency: Four times a year (March, June, September, and December)
IMPORTANT NOTICE
All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.
Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.