BİLGİSAYAR DESTEKLİ TASARIM-BİLGİSAYAR DESTEKLİ ÜRETİM VE PRESLEME SİSTEMLERİYLE ÜRETİLEN PORSELEN LAMİNAT VENERLERİN KENAR VE İNTERNAL UYUMLARININ KARŞILAŞTIRILMASI: İN-VİTRO ÇALIŞMA
Öz
Amaç: Çalışmanın amacı, Bilgisayar destekli
tasarım-Bilgisayar destekli üretim ve
Isı ile Presleme yöntemleriyle üretilmiş porselen laminat venerlerin kenar ve
iç yüzey uyumlarının karşılaştırılmasıdır.
Gereç ve yöntem: Kenar ve iç yüzey uyumlarının fabrikasyon tekniğine
göre farklılık gösterip göster- mediğini belirlemek amacıyla toplam 40
adet porselen laminat vener değerlendirildi. Venerler, Bilgisayar des- tekli
tasarım-Bilgisayar destekli üretim ve
Isı ile Presleme yöntemleriyle üretildi (n=20). Kenar ve iç yüzey uyumları
replika tekniği kullanılarak değerlendirildi. Her bir venerin replikası akışkan
kıvamlı elastomerik ölçü materyali kulanı- larak alındı ve replikalar,
meziyo-distal ve insizo-gingival yönde kesildi. Her bir kesitin iç yüzey ve
kenar uyumları ışık mikroskobunda x40 büyütme kullanılarak ölçüldü. İç yüzey
uyumu için 9 nokta, kenar uyum içinse 3 nokta ölçüldü ve ortalamaları alındı.
Levene ve independent samples t testi kullanılarak istatistiksel analiz yapıldı
(p<0,05).
Bulgular: Isı ile Presleme sistemi ile üretilen venerlerin
kenar aralık değerleri (269±136,92 μm), Bilgisayar destekli tasarım-Bilgisayar destekli üretim ile üretilenlere (192±61,02 μm) göre daha yüksektir (p= 0,028). İki
yöntemin iç yüzey aralık değerleri karşılaştırıldığında yine, Isı ile Presleme
sistemi ile üretilen venerlerin iç yüzey aralık değerleri (190,43±63,33 μm), Bilgisayar destekli tasarım-Bilgisayar destekli üretim ile üretilenlere (105,61±24,39 μm) göre daha
yüksektir (p=0,00).
Sonuç: Bu çalışmanın kısıtlamaları dahilinde, Bilgisayar
destekli tasarım-Bilgisayar
destekli üretim yöntemi ile üre- tilen porselen laminat venerlerin kenar ve iç
yüzey uyum- ları, Isı ile
Presleme sistemi ile üretilenlere göre daha iyidir.
Anahtar Kelimeler:
Laminat vener, Bilgisayar
destekli tasarım-Bilgisayar
destekli üretim, Isı ile Presleme, Kenar uyum, İç yüzey uyumu, Replika
yöntemi
COMPARISON OF MARGINAL
AND INTERNAL ADAPTATION OF COMPUTER AIDED DESIGN-COMPUTER AIDED MANUFACTURING
AND HEAT-PRESSED CERAMIC LAMINATE VENEERS: AN IN-VITRO STUDY
ABSTRACT
adaptations of porcelain laminate veneers produced with Computer aided
design-Computer aided manufacturing and Heat-pressed techniques.
Material
and Methods: A total of 40 porcelain laminate veneers were
evaluated whether the marginal and internal adaptations are changed due to
fabrication technique. The veneers were fabricated with Computer aided
design-Computer aided manufacturing and Heat-pressed techniques (n=20). The
marginal and internal adaptations of veneers were measured by using a replica
technique. Replicas of each veneer were obtained by using a light-body silicone
impression material. The replicas were sectioned mesio-distally and
gingivo-incisally. Then the marginal and internal gap adaptation of each cross
section were measured by a stereomicros- cope at x40 magnification. Nine
measurement locations for internal, 3 measurement locations for marginal
adaptation were used to obtain the mean values. Levene and independent samples
t-test was used to identify the statistical difference among the groups
(p<0.05).
Results: The mean marginal
adaptation values of Heat-pressed and Computer aided design-Computer aided
manufacturing veneers were 269±136.92 μm and 192± 61.02 μm respectively. There was a significant
difference between the values (p=0.028). A significant difference was found
between the internal adaptation values of Heat-pressed (190.43±63.33 μm) and Computer aided design-Computer aided manufacturing veneers
(105.61± 24.39 μm) (p=0.00).
Conclusion:
Within the limitations of this in-vitro study, the Computer aided
design-Computer aided manufac- turing
veneers showed statistically better marginal and internal adaptation values
than the Heat-pressed veneers.
Keywords: Laminate veneer, Computer
aided design-Computer aided manufacturing, Heat-pressed, Marginal adaptation, Internal adaptation, Replica technique
Anahtar Kelimeler
Laminat vener Bilgisayar destekli tasarım-Bilgisayar destekli üretim Isı ile Presleme Kenar uyum İç yüzey uyumu
Kaynakça
- 1. Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain veneers: a review of the literature. J Dent 2000;28:163–77.
- 2. Nalbant DA, Ömeroğlu N. Farklı porselen laminate veneer yapım yöntemlerinin mikrosızıntı yönünden karşılaştırılmalı olarak değerlendirilmesi. Atatürk Üniv. Diş Hek. Fak. Derg 2001;11:5-12.
- 3. Sadowsky SJ. An overview of treatment considerations for esthetic restorations: a review of the literature. J Prosthet Dent 2006;96:433-42.
- 4. Oztürk E, Bolay S. Survival of porcelain laminate veneers with different degrees of dentin exposure: 2-year clinical results. J Adhes Dent 2014;16:481-9.
- 5. Taskonak B, Anusavice K, Mecholsky J. Role of investment interaction layer on strength and toughness of ceramic laminates. Dent Mater 2004;20:701–8.
- 6. Aboushelib MN, Elmahy WA, Ghazy MH. Internal adaptation, marginal accuracy and microleakage of a pressable versus a machinable ceramic laminate veneers. J Dent 2012;40:670-7.
- 7. Anadioti E, Aquilino SA, Gratton DG, Holloway JA, Denry IL, Thomas GW, Qian F. Internal fit of pressed and computer-aided design/computer-aided manufacturing ceramic crowns made from digital and conventional impressions. J Prosthet Dent 2015;113:304-9.
- 8. Laurent M, Scheer P, Dejou J, Laborde G. Clinical evaluation of the marginal fit of cast crowns-validation of the silicone replica method. J Oral Rehab 2008;35:116-22.
- 9. Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress and procera crowns. Int J Prosthodont 1997;10:478-84.
- 10. Gemalmaz D, Çelik Ç. Comparison of marginal integrity of ceramic and composite veneer restorations luted with two different resin agents: an in vitro study. Int J Prosthodont 2002;15:59-64.
- 11. Giannetopoulos S, Van Noort R, Tsitrou E. Evaluation of the marginal integrity of ceramic copings with different marginal angles using two different CAD/CAM systems. J Dent 2010;38:980-6.
- 12. Harasani MH, Isidor F, Kaaber S. Marginal fit of porcelain and indirect composite laminate veneers under in vitro conditions. Scand J Dent Res 1991;99:262-8.
- 13. Karakaya S, Sengun A, Özer F. Evaluation of internal adaptation in ceramic and composite resin inlays by silicon replica technique. J Oral Rehab 2005;32:448-53.
- 14. Wettstein F, Sailer I, Roos M, Hammerie CHF. Clinical study of internal gaps of zirconia and metal frameworks for fixed partial dentures. Eur J Oral Sci 2008;116:272-9.
- 15. Qualtrough AJ, Piddock V, Kypreou V. A comparison of two in vitro methods for assessing the fitting accuracy of composite inlays. Br Dent J 1993;174:450-4.
- 16. Kim JH, Miranda P, Kim DK, Lawn BR. Effect of an adhesive interlayer on the fracture of a brittle coating on a supporting substrate. J Mater Res 2003;18:222-7.
- 17. Thompson VP, Rekow ED. Dental ceramics and the molar crown testing ground. J Appl Oral Sci 2004;12:26-36.
- 18. Da Silva NRFA, De Souza GM, Coelho PG, Stappert CFJ, Clark EA, Rekow ED, Thompson VP. Effect of water storage time and composite cement thickness on fatigue of a glass- ceramic trilayer system. J Biomed Mater Res B Appl Biomater 2008;84:117-23.
- 19. Oysaed H, Ruyter IE. Composites for use in posterior teeth: mechanical properties tested under dry and wet conditions. J Biomed Mater Res 1986;20:261-71.
- 20. Weaver JD, Johnson GH, Bales DJ. Marginal adaptation of castable ceramic crowns. J Prosthet Dent 1991;66:747-53.
- 21. Lee KB, Park CW, Kim KH, Kwon TY. Marginal and internal fit of all-ceramic crowns fabricated with two different CAD/CAM systems. Dent Mater J 2008;27:422-6.
- 22. Kokubo Y, Tsumita M, Kano T, Sakuri S, Fukushina S. Clinical marginal and internal gaps of zirconia all-ceramic crowns. J Prosthodont Res 2011;55:40-3.
- 23. Groten M, Axmann D, Probster L, Weber H. Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. J Prosthet Dent 2000;83:40-9.
- 24. Wall JG, Reisbick MH, Espelata KG. Cement luting thickness beneath porcelain veneers made on platinum foil. J Prosthet Dent 1992;68:448-50.
- 25. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia- based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001;14:231-8.
- 26. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J 1971;131:107-11.
- 27. Suarez MJ, Villaumbrosia PG, Lozano JFL. Comparison of the marginal fit of procera allceram crowns with two finish lines. Int J Prosthodont 2003;16:229-32.
- 28. Leinfelder KF, Isenberg BP, Essig ME. A new method for generating ceramic restorations: a CAD-CAM system. J Am Dent Assoc 1989;118:703-7.
- 29. Essig ME, Isenberg BP, Leinfelder KF, Liu PR. In vitro evaluation of Cerec veneers utilizing standardized preparation template. In:Mörmann WH ed. Proceedings of international symposium on computer restorations. State of the art of CEREC method, Quintessence Publishing: 1991. p. 547-52.
- 30. Sorensen JA, Strutz JM, Avera SP, Materdomini D. Marginal fidelity and microleakage of porcelain veneers made by two techniques. J Prosthet Dent 1992;67:16-22.
- 31. Alghazzawi TF, Liu PR, Essig ME. The effect of different fabrication steps on the marginal adaptation of two types of glass-infiltrated ceramic crown copings fabricated by cad/cam technology. J Prosthodont 2012;21:167-72.
- 32. Lin TM, Liu PR, Ramp LC, Essig ME, Givan DA, Pan Y. Fracture resistance and marginal discrepancy of porcelain laminate veneers influenced by preparation design and restorative material in vitro. J Dent 2012;40:202-9.
- 33. Martin N, Jedynakiewicz NM. Interface dimensions of CEREC-2 MOD inlays. Dent Mater 2000;16:68-74.
- 34. Reich S, Wichmann M, Nkenke E, Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 2005;113:174-9.
Ayrıntılar
| Bölüm | Makaleler |
|---|---|
| Yazarlar | |
| Yayımlanma Tarihi | 16 Nisan 2017 |
| Yayımlandığı Sayı | Yıl 2017 Cilt: 27 Sayı: 1 |
Kaynak Göster
Bu eser Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır. Tıklayınız.