Araştırma Makalesi
BibTex RIS Kaynak Göster

İçeceklerin Tek Renkli Kompozit Rezinlerin Renk Stabilitesine ve Yüzey Pürüzlülüğüne Olan Etkisi

Yıl 2024, Cilt: 13 Sayı: 1, 68 - 76, 26.01.2024
https://doi.org/10.54617/adoklinikbilimler.1290223

Öz

Amaç: Bu çalışmanın amacı, 5 farklı renklendirme solüsyonunun tek renkli kompozit rezinlerin renk stabilitesine ve yüzey pürüzlülüğüne olan etkisinin değerlendirilmesidir.
Gereç ve Yöntem: Çalışmada 5 farklı tek renkli kompozit rezin (Clearfil Majesty ES-2 Universal, Omnichroma, Vittra APS Unique, ZenChroma, Charisma Topaz ONE) kullanılmıştır. Her bir grup için 35 adet kompozit disk (2 mm kalınlığında- 7 mm çapında) hazırlanmıştır. Bitim ve cila işlemleri Sof-Lex XT cila diskleri ile gerçekleştirilmiştir. Polimerizasyon işleminin tamamlanması için örnekler 37 °C distile suda 24 saat bekletilmiştir. Ardından örnekler rastgele 5 deneysel gruba ayrılarak; kahvede, distile suda, kırmızı şarapta, çayda ve kolada renklendirilmiştir (n=7). Örneklerin başlangıç, 10. gün ve 28. gün L, a, ve b değerleri Konica Minolta CM-3600A ile ölçülmüş ve renk değişimleri CIEDE2000 formülü kullanılarak elde edilmiştir. Yüzey pürüzlülükleri ise Mitutoyo SJ-410 profilometre cihazı ile ölçülmüştür. Veriler tek yönlü varyans analizi (One-way ANOVA) ve Kruskal Wallis testleri ile analiz edilmiştir (p<0.05).
Bulgular: Renklendirme solüsyonlarından kırmızı şarap 28 günlük renklendirme periyodunda diğer gruplara göre istatistiksel olarak anlamlı farklılık gösterirken, kola 28 günlük renklendirme periyodunda en yüksek pürüzlülük değerlerine sahip olup, diğer gruplara göre istatistiksel olarak anlamlı farklılık göstermiştir (p<0.05).
Sonuç: Estetik restorasyonlarda renklenme önemli bir parametredir. Materyallerin hem yüzey hem renk özellikleri renklendirici solüsyonlardan etkilenmektedir.

Kaynakça

  • Referans1. Ebaya MM, Ali AI, El-Haliem HA, Mahmoud SH. Color stability and surface roughness of ormocer-versus methacrylate-based single shade composite in anterior restoration. BMC Oral Health 2022;22:430.
  • Referans2. Setcos JC, Tarim B, Suzuki S. Surface finish produced on resin composites by new polishing systems. Quintessence Int 1999;30:169-73.
  • Referans3. Turssi CP, Saad J, Duarte Jr S, Rodrigues Jr AL. Composite surfaces after finishing and polishing techniques. Am J Dent 2000;13:136-8.
  • Referans4. Lu H, Roeder LB, Powers JM. Effect of polishing systems on the surface roughness of microhybrid composites. J Esthet Restor Dent 2003;15:297-304.
  • Referans5. Aydın N, Topçu F-T, Karaoğlanoğlu S, Oktay EA, Erdemir U. Effect of finishing and polishing systems on the surface roughness and color change of composite resins. J Clin Exp Dent 2021;13:446-54.
  • Referans6. Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004;20:530-4.
  • Referans7. Janda R, Roulet JF, Kaminsky M, Steffin G, Latta M. Color stability of resin matrix restorative materials as a function of the method of light activation. Eur J Oral Sci 2004;112:280-5.
  • Referans8. Bagheri R, Burrow M, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
  • Referans9. Mjör IA, Moorhead JE, Dahl JE. Reasons for replacement of restorations in permanent teeth in general dental practice. Int Dent J 2000;50:361-6.
  • Referans10. Tyas M. Placement and replacement of restorations by selected practitioners. Aust Dent J 2005;50:81-9.
  • Referans11. Aydın N, Karaoğlanoğlu S, Oktay EA, Kılıçarslan MA. Investigating the color changes on resin-based CAD/CAM Blocks. J Esthet Restor Dent 2020;32:251-6.
  • Referans12. Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013;110:14- 20.
  • Referans13. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent 2019;31:103-12.
  • Referans14. Tan B, Yap A, Ma H, Chew J, Tan W. Effect of beverages on color and translucency of new tooth-colored restoratives. Oper Dent 2015;40:56-65.
  • Referans15. Krämer N, Reinelt C, Frankenberger R. Ten-year clinical performance of posterior resin composite restorations. J Adhes Dent 2015;17:433-41.
  • Referans16. Ardu S, Duc O, Di Bella E, Krejci I. Color stability of recent composite resins. Odontology 2017;105:29-35.
  • Referans17. Koksal T, Dikbas I. Color stability of different denture teeth materials against various staining agents. Dent Mater J.2008;27:139-44.
  • Referans18. Janda R, Roulet JF, Latta M, Steffin G, Rüttermann S. Color stability of resin-based filling materials after aging when cured with plasma or halogen light. Eur J Oral Sci 2005;113:251-7.
  • Referans19. Samra APB, Pereira SK, Delgado LC, Borges CP. Color stability evaluation of aesthetic restorative materials. Braz Oral Res 2008;22:205-10.
  • Referans20. Menon A, Ganapathy DM, Mallikarjuna AV. Factors that influence the colour stability of composite resins. Drug Invent Today 2019;11:46-50.
  • Referans21. Fontes ST, Fernández MR, Moura CMd, Meireles SS. Color stability of a nanofill composite: effect of different immersion media. J Appl Oral Sci 2009;17:388-91.
  • Referans22. Hussain SK, Al-Abbasi SW, Refaat M-M, Hussain AM. The effect of staining and bleaching on the color of two different types of composite restoration. J Clin Exp Dent 2021;13:1233-8.
  • Referans23. Borges MG, Silva GR, Neves FT, Soares CJ, Faria-e-Silva AL, Carvalho RF, et al. Oxygen inhibition of surface composites and its correlation with degree of conversion and color stability. Braz Dent J 2021;32:91-7.
  • Referans24. Ramírez-Vargas GG, y Mendoza JEM, Aliaga-Mariñas AS, Ladera-Castañeda MI, Cervantes-Ganoza LA, Cayo-Rojas CF. Effect of polishing on the surface microhardness of nanohybrid composite resins subjected to 35% hydrogen peroxide: An in vitro study. J Int Soc Prev Community Dent 2021;11:216-21.
  • Referans25. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
  • Referans26. Puckett AD, Fitchie JG, Kirk PC, Gamblin J. Direct composite restorative materials. Dent Clin North Am 2007;51:659-75.
  • Referans27. Badra VV, Faraoni JJ, Ramos RP, Palma-Dibb RG. Influence of different beverages on the microhardness and surface roughness of resin composites. Oper Dent 2005;30:213-9.
  • Referans28. Eom A-H, Kim D-S, Lee S-H, Byun C-W, Park N-H, Choi K-K. Optical characteristics of resin composite before and after polymerization. J Korean Acad Conserv Dent 2011;36(3):219-30.
  • Referans29. da Silva Pedrosa M, Nogueira FN, de Oliveira Baldo V, Medeiros IS. Changes in color and contrast ratio of resin composites after curing and storage in water. Saudi Dent J 2021;33:1160-5.
  • Referans30. Mehmet B, Öztaş N. Cam iyonomer içerikli farklı restoratif materyallerin yüzey pürüzlülüklerinin değerlendirilmesi. Acta Odontol Turc 2013;30:13-7.
  • Referans31. Badole GP, Shenoi PR, Kubde R, Bengal S. Comparative Evaluation of Surface Roughness and Microhardness of Bulk-fill Composite Placed in Artificial Saliva at Three Different pH. World J Dent 2023;14:331-5.
  • Referans32. El-Rashidy AA, Shaalan O, Abdelraouf RM, Habib NA. Effect of immersion and thermocycling in different beverages on the surface roughness of single-and multi-shade resin composites. BMC Oral Health 2023;23:1-8.
  • Referans33. Bansal K, Acharya SR, Saraswathi V. Effect of alcoholic and non-alcoholic beverages on color stability and surface roughness of resin composites: An in vitro study. J Conserv Dent 2012;15:283-8.

Effect of Different Beverages on Color Stability and Surface Roughness of Resin Composites

Yıl 2024, Cilt: 13 Sayı: 1, 68 - 76, 26.01.2024
https://doi.org/10.54617/adoklinikbilimler.1290223

Öz

Aim: To evaluate the effect of 5 different colorant solutions on the color stability and surface roughness of single-color resin composites.
Materials and Methods: 5 different single-color composites (Clearfil Majesty ES-2 Universal, Omnichroma, Vittra APS Unique, ZenChroma, Charisma Topaz ONE) were used. 35 composite discs (2 mm thick-7 mm diameter) were prepared for each group. Finishing and polishing procedures were carried out with Sof-Lex XT polishing discs. To complete the polymerization, the samples were kept in distilled water at 37 °C for 24 hours. Then the samples were randomly divided into 5 groups; coffee, distilled water, red wine, tea and cola(n=7). The baseline, 10th day and 28th day L, a, and b values were measured with Konica Minolta CM-3600A and color changes were obtained using the CIEDE2000 formula. Surface roughness were measured with the Mitutoyo SJ-410 profilometer. Data were analyzed with One-way ANOVA and Kruskal Wallis tests (p<0.05).
Results: Red wine showed a significant difference in the 28-day coloration process, while cola had the highest roughness values in the 28-day coloration process and showed a significant difference (p<0.05).
Conclusion: Coloration is an important parameter in aesthetic restorations. Both surface and color properties of materials are affected by colorant solutions.

Kaynakça

  • Referans1. Ebaya MM, Ali AI, El-Haliem HA, Mahmoud SH. Color stability and surface roughness of ormocer-versus methacrylate-based single shade composite in anterior restoration. BMC Oral Health 2022;22:430.
  • Referans2. Setcos JC, Tarim B, Suzuki S. Surface finish produced on resin composites by new polishing systems. Quintessence Int 1999;30:169-73.
  • Referans3. Turssi CP, Saad J, Duarte Jr S, Rodrigues Jr AL. Composite surfaces after finishing and polishing techniques. Am J Dent 2000;13:136-8.
  • Referans4. Lu H, Roeder LB, Powers JM. Effect of polishing systems on the surface roughness of microhybrid composites. J Esthet Restor Dent 2003;15:297-304.
  • Referans5. Aydın N, Topçu F-T, Karaoğlanoğlu S, Oktay EA, Erdemir U. Effect of finishing and polishing systems on the surface roughness and color change of composite resins. J Clin Exp Dent 2021;13:446-54.
  • Referans6. Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004;20:530-4.
  • Referans7. Janda R, Roulet JF, Kaminsky M, Steffin G, Latta M. Color stability of resin matrix restorative materials as a function of the method of light activation. Eur J Oral Sci 2004;112:280-5.
  • Referans8. Bagheri R, Burrow M, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
  • Referans9. Mjör IA, Moorhead JE, Dahl JE. Reasons for replacement of restorations in permanent teeth in general dental practice. Int Dent J 2000;50:361-6.
  • Referans10. Tyas M. Placement and replacement of restorations by selected practitioners. Aust Dent J 2005;50:81-9.
  • Referans11. Aydın N, Karaoğlanoğlu S, Oktay EA, Kılıçarslan MA. Investigating the color changes on resin-based CAD/CAM Blocks. J Esthet Restor Dent 2020;32:251-6.
  • Referans12. Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013;110:14- 20.
  • Referans13. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent 2019;31:103-12.
  • Referans14. Tan B, Yap A, Ma H, Chew J, Tan W. Effect of beverages on color and translucency of new tooth-colored restoratives. Oper Dent 2015;40:56-65.
  • Referans15. Krämer N, Reinelt C, Frankenberger R. Ten-year clinical performance of posterior resin composite restorations. J Adhes Dent 2015;17:433-41.
  • Referans16. Ardu S, Duc O, Di Bella E, Krejci I. Color stability of recent composite resins. Odontology 2017;105:29-35.
  • Referans17. Koksal T, Dikbas I. Color stability of different denture teeth materials against various staining agents. Dent Mater J.2008;27:139-44.
  • Referans18. Janda R, Roulet JF, Latta M, Steffin G, Rüttermann S. Color stability of resin-based filling materials after aging when cured with plasma or halogen light. Eur J Oral Sci 2005;113:251-7.
  • Referans19. Samra APB, Pereira SK, Delgado LC, Borges CP. Color stability evaluation of aesthetic restorative materials. Braz Oral Res 2008;22:205-10.
  • Referans20. Menon A, Ganapathy DM, Mallikarjuna AV. Factors that influence the colour stability of composite resins. Drug Invent Today 2019;11:46-50.
  • Referans21. Fontes ST, Fernández MR, Moura CMd, Meireles SS. Color stability of a nanofill composite: effect of different immersion media. J Appl Oral Sci 2009;17:388-91.
  • Referans22. Hussain SK, Al-Abbasi SW, Refaat M-M, Hussain AM. The effect of staining and bleaching on the color of two different types of composite restoration. J Clin Exp Dent 2021;13:1233-8.
  • Referans23. Borges MG, Silva GR, Neves FT, Soares CJ, Faria-e-Silva AL, Carvalho RF, et al. Oxygen inhibition of surface composites and its correlation with degree of conversion and color stability. Braz Dent J 2021;32:91-7.
  • Referans24. Ramírez-Vargas GG, y Mendoza JEM, Aliaga-Mariñas AS, Ladera-Castañeda MI, Cervantes-Ganoza LA, Cayo-Rojas CF. Effect of polishing on the surface microhardness of nanohybrid composite resins subjected to 35% hydrogen peroxide: An in vitro study. J Int Soc Prev Community Dent 2021;11:216-21.
  • Referans25. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
  • Referans26. Puckett AD, Fitchie JG, Kirk PC, Gamblin J. Direct composite restorative materials. Dent Clin North Am 2007;51:659-75.
  • Referans27. Badra VV, Faraoni JJ, Ramos RP, Palma-Dibb RG. Influence of different beverages on the microhardness and surface roughness of resin composites. Oper Dent 2005;30:213-9.
  • Referans28. Eom A-H, Kim D-S, Lee S-H, Byun C-W, Park N-H, Choi K-K. Optical characteristics of resin composite before and after polymerization. J Korean Acad Conserv Dent 2011;36(3):219-30.
  • Referans29. da Silva Pedrosa M, Nogueira FN, de Oliveira Baldo V, Medeiros IS. Changes in color and contrast ratio of resin composites after curing and storage in water. Saudi Dent J 2021;33:1160-5.
  • Referans30. Mehmet B, Öztaş N. Cam iyonomer içerikli farklı restoratif materyallerin yüzey pürüzlülüklerinin değerlendirilmesi. Acta Odontol Turc 2013;30:13-7.
  • Referans31. Badole GP, Shenoi PR, Kubde R, Bengal S. Comparative Evaluation of Surface Roughness and Microhardness of Bulk-fill Composite Placed in Artificial Saliva at Three Different pH. World J Dent 2023;14:331-5.
  • Referans32. El-Rashidy AA, Shaalan O, Abdelraouf RM, Habib NA. Effect of immersion and thermocycling in different beverages on the surface roughness of single-and multi-shade resin composites. BMC Oral Health 2023;23:1-8.
  • Referans33. Bansal K, Acharya SR, Saraswathi V. Effect of alcoholic and non-alcoholic beverages on color stability and surface roughness of resin composites: An in vitro study. J Conserv Dent 2012;15:283-8.
Toplam 33 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Diş Hekimliği
Bölüm Araştırma Makalesi
Yazarlar

Özlem Erçin 0000-0003-3379-4567

Dilan Kopuz 0000-0003-2979-6068

Yayımlanma Tarihi 26 Ocak 2024
Gönderilme Tarihi 30 Nisan 2023
Yayımlandığı Sayı Yıl 2024 Cilt: 13 Sayı: 1

Kaynak Göster

Vancouver Erçin Ö, Kopuz D. İçeceklerin Tek Renkli Kompozit Rezinlerin Renk Stabilitesine ve Yüzey Pürüzlülüğüne Olan Etkisi. ADO Klinik Bilimler Dergisi. 2024;13(1):68-76.