Research Article
BibTex RIS Cite

Ph Değerleri Farklı Kahve Türlerinde Bekletilen Kompozit Rezinlerin Yüzey Pürüzlülüğünün Değerlendirilmesi

Year 2020, Volume: 7 Issue: 2, 252 - 258, 01.08.2020
https://doi.org/10.15311/selcukdentj.515303

Abstract

Amaç: Bu
çalışmanın amacı pH dereceleri farklı 5 kahve çeşidinin 4 farklı kompozit rezin
üzerinde farklı periyodlarda oluşturduğu yüzey pürüzlülük miktarını
değerlendirmektir. 

Gereç ve Yöntemler:Çalışmada her kompozit grubundan (Estelite Sigma Quick, G-Aenial,
Clearfil Majesty, Ceram X One) 60 adet örnek hazırlandı. 2 mm derinliğinde 6 mm
çapında eşit olarak hazırlanan disklere kompozit rezinler yerleştirildi. Her
bir örnek polimerize edildi ve polisajları yapıldı. Deney öncesi örnekler 24
saat distile suda bekletildi ve profilometre cihazı kullanılarak ilk yüzey
pürüzlülük değerleri kaydedildi. Her kompozit grubu 5 alt gruba ayrıldı.
Sonrasında 1. gün, 2. gün ve 7. gün olacak şekilde kahvelerde (Nescafe, Türk
kahvesi, Ethiopia, Colombia, Veranda) bekletilen örneklerin tekrar yüzey
pürüzlülük ölçümleri yapıldı. Çalışmanın analizinde tek yönlü varyans analizi ANOVA
ve post hoc testleri kullanıldı.

Bulgular:Kahvelerde
bekletilen örneklerin 24 ve 48 saat sonundaki yüzey pürüzlülük sonuçlarının
istatistiksel analizinde en fazla Ethiopia kahvesinde bekletilen Clearfil
Majesty’de, en az ise Veranda kahvesinde bekletilen Estelite Sigma Quick
rezininde pürüzlülük oluşmuştur. 7. gün sonunda ise
Nescafede
bekletilen Ceram X One kompozit disklerinde oluşan yüzey pürüzlülüğü çok düşük
değerlerde görülmüştür.

Sonuçlar:Sonuç olarak kompozit rezinlerin yüzey pürüzlülüğünde günlük tüketilen
yiyecek ve içeceklerin sadece pH’ı değil, başka birçok faktörün de etkisi
olduğu belirlenmiştir.

Anahtar Kelimeler:Kahve türleri, kompozit
rezin, profilometre, yüzey pürüzlülüğü

References

  • KAYNAKLARReferans1. Ferracane JL. Current trends in dental composites. Crit Rev Oral Biol Med 1995;6:302-318.
  • Referans2. Spahl W, Budzikiewicz H, Geurtsen W. Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry. J Dent 1998;26:37-45.
  • Referans3. Lepri CP, Palma-Dibb RG. Surface roughness and color change of a composite: influence of beverages and brushing. Dent Mater J 2012;31:689-696.
  • Referans4. Prakki A, Cilli R, Mondelli RFL, Kalachandra S, Pereira JC. Influence of pH environment on polymer based dental material properties. J Dent 2005;33:91-98.
  • Referans5. Kakaboura A, Fragouli M, Rahiotis C, Silikas N. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter. J Mater Sci Mater Med 2007;18:155-163.
  • Referans6. Yap AU, Mok BY. Effects of professionally applied topical fluorides on surface hardness of composite-based restoratives. Opere Dent 2002;27:576-581.
  • Referans7. West NX, Maxwell A, Hughes JA, Parker DM, Newcombe RG, Addy M. A method to measure clinical erosion: the effect of orange juice consumption on erosion of enamel. J Dent 1998;26:329-335.
  • Referans8. Pruthi G, Jain V, Kandpal HC, Mathur VP, Shah N. Effect of bleaching on color change and surface topography of composite restorations. Int J Dent 2010;22:1-7.
  • Referans9. Buchalla W, Attin T, Hilgers RD, Hellwig E. The effect of water storage and light exposure on the color and translucency of a hybrid and a microfilled composite. J Prosthet Dent 2002;87(3):264-270.
  • Referans10. Gonulol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent 2012;40(2):64-70.
  • Referans11. Antonson SA, Yazici AR, Okte Z, Villalta P, Antonson DE, Hardigan PC. Effect of resealing on microleakage of resin composite restorations in relationship to margin design and composite type. Eur J Dent 2012;6(4):389-95.
  • Referans12. Owens BM, Johnson WW. Effect of new generation surface sealants on the marginal permeability of Class V resin composite restorations. Oper Dent 2006;31(4):481-8.
  • Referans13. Ryba TM, Dun NWJ, Murchison DF. Surface roughness of various packable composites. Oper Dent 2003;27:243-247. Referans14. McKinney JE, Antonucci JM, Rupp NW. 1987. Wear and microhardness of glass ionomer cements. J Dental Res 2002;66:1134-1139.
  • Referans15. Bani M, Öztaş N. Cam iyonomer içerikli farklı restoratif materyallerin yüzey pürüzlülüklerinin değerlendirilmesi. Acta Odontologica Turcica 2013;30:13-7.
  • Referans16. Barghi N, Alexander C. A new surface sealant for polishing composite resin restorations. Compend Contin Educ Dent 2003;24:30-3.
  • Referans17. Erkli H, Ersöz E. Farklı fluor jellerin rezin materyallerin yüzey pürüzlülüğü üzerine etkisinin karşılaştırılması. Acta Odontol Turcica 2012;29:79-85.
  • Referans18. Yap AU, Wattanapayungkul P, Chung SM. Influence of the polymerization process on composite resistance to chemical degradation by food-simulating liquids. Oper Dent 2003;28:723-727.
  • Referans19. Lee YK, Lu H, Oguri M, Powers JM. Changes in gloss after simulated generalized wear of composite resins. J Prosthet Dent 2005;94:370-376.
  • Referans20. Lee YK, Yu B, Lee SH, Cho MS, Lee CY, Lim HN. Shade compatibility of esthetic restorative materials—A review. Dent Mater 2010;26:1119-26.
  • Referans21. Türkün LŞ, Türkün M. Effect of bleaching and repolishing procedures on coffee and tea stain removal. J Esth Res Dent 2004;16:290-301.
  • Referans22. Marghalani HY. Effect of filler particles on surface roughness of experimental composite series. J Appl Oral Sci 2010;18:59-67.
  • Referans23. Cehreli ZC, Yazıcı R. Garcia-Godoy F. Effect of 1.23 percent APF gel on fluoride-releasing restorative materials. ASDC J Dent Child 2000;67:330-337.
  • Referans24. Çelik N, Sağsöz Ö, Gündoğdu M. Farklı içeceklerin posterior kompozitlerin renk değişikliği ve yüzey pürüzlülüğü üzerine etkisinin değerlendirilmesi. Atatürk Üniv. Diş Hek. Fak. Derg. 2017;27(1):27-33.
  • Referans25. Li H, Zou Y, Ding G. Dietary factors associated with dental erosion: a meta-analysis. PLoS One 2012;7(8):1-6.
  • Referans26. von Fraunhofer JA, Rogers MW. Dissolution of dental enamel in soft drinks. Gen Dent 2004;52(4):308-312.
  • Referans27. Karaman E, Tuncer D, Firat E, Ozdemir OS, Karahan S. Influence of Different Staining Beverages on Color Stability, Surface Roughness and Microhardness of Silorane and Methacrylate-based Composite Resins. J Contemp Dent Pract 2014;15(3):319-325.
  • Referans28. Kitchens M, Owens BM. Effect of carbonated beverages, coffee, sports and high energy drinks, and bottled water on the in vitro erosion characteristics of dental enamel. J Clin Ped Dentist 2007;31(3):153-159.
  • Referans29. Lussi A, Jaeggi T. Erosion—diagnosis and risk factors. Clin Oral Invest 2008;12:5-13.
  • Referans30. Isabel CAC, Domınguette AAS, Santos SG, Rıbeıro JCR, Moysés MR. Surface roughness of a resin composite. RGO- Revista Gaúcha de Odontologia 2016;64:50-5.
  • Referans31. Örtengren U, Wellendorf H, Karlsson S, Ruyter IE. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Reh 2001;28:1106-1115.
  • Referans32. Turkun LS, Turkun M. The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials. Oper Dent 2004;29:203-11.
  • Referans33. Soderholm KJ. Degradation of glass filler in experimental composites. J Dent Res 1981; 11:1867-1875.
Year 2020, Volume: 7 Issue: 2, 252 - 258, 01.08.2020
https://doi.org/10.15311/selcukdentj.515303

Abstract

References

  • KAYNAKLARReferans1. Ferracane JL. Current trends in dental composites. Crit Rev Oral Biol Med 1995;6:302-318.
  • Referans2. Spahl W, Budzikiewicz H, Geurtsen W. Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry. J Dent 1998;26:37-45.
  • Referans3. Lepri CP, Palma-Dibb RG. Surface roughness and color change of a composite: influence of beverages and brushing. Dent Mater J 2012;31:689-696.
  • Referans4. Prakki A, Cilli R, Mondelli RFL, Kalachandra S, Pereira JC. Influence of pH environment on polymer based dental material properties. J Dent 2005;33:91-98.
  • Referans5. Kakaboura A, Fragouli M, Rahiotis C, Silikas N. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter. J Mater Sci Mater Med 2007;18:155-163.
  • Referans6. Yap AU, Mok BY. Effects of professionally applied topical fluorides on surface hardness of composite-based restoratives. Opere Dent 2002;27:576-581.
  • Referans7. West NX, Maxwell A, Hughes JA, Parker DM, Newcombe RG, Addy M. A method to measure clinical erosion: the effect of orange juice consumption on erosion of enamel. J Dent 1998;26:329-335.
  • Referans8. Pruthi G, Jain V, Kandpal HC, Mathur VP, Shah N. Effect of bleaching on color change and surface topography of composite restorations. Int J Dent 2010;22:1-7.
  • Referans9. Buchalla W, Attin T, Hilgers RD, Hellwig E. The effect of water storage and light exposure on the color and translucency of a hybrid and a microfilled composite. J Prosthet Dent 2002;87(3):264-270.
  • Referans10. Gonulol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent 2012;40(2):64-70.
  • Referans11. Antonson SA, Yazici AR, Okte Z, Villalta P, Antonson DE, Hardigan PC. Effect of resealing on microleakage of resin composite restorations in relationship to margin design and composite type. Eur J Dent 2012;6(4):389-95.
  • Referans12. Owens BM, Johnson WW. Effect of new generation surface sealants on the marginal permeability of Class V resin composite restorations. Oper Dent 2006;31(4):481-8.
  • Referans13. Ryba TM, Dun NWJ, Murchison DF. Surface roughness of various packable composites. Oper Dent 2003;27:243-247. Referans14. McKinney JE, Antonucci JM, Rupp NW. 1987. Wear and microhardness of glass ionomer cements. J Dental Res 2002;66:1134-1139.
  • Referans15. Bani M, Öztaş N. Cam iyonomer içerikli farklı restoratif materyallerin yüzey pürüzlülüklerinin değerlendirilmesi. Acta Odontologica Turcica 2013;30:13-7.
  • Referans16. Barghi N, Alexander C. A new surface sealant for polishing composite resin restorations. Compend Contin Educ Dent 2003;24:30-3.
  • Referans17. Erkli H, Ersöz E. Farklı fluor jellerin rezin materyallerin yüzey pürüzlülüğü üzerine etkisinin karşılaştırılması. Acta Odontol Turcica 2012;29:79-85.
  • Referans18. Yap AU, Wattanapayungkul P, Chung SM. Influence of the polymerization process on composite resistance to chemical degradation by food-simulating liquids. Oper Dent 2003;28:723-727.
  • Referans19. Lee YK, Lu H, Oguri M, Powers JM. Changes in gloss after simulated generalized wear of composite resins. J Prosthet Dent 2005;94:370-376.
  • Referans20. Lee YK, Yu B, Lee SH, Cho MS, Lee CY, Lim HN. Shade compatibility of esthetic restorative materials—A review. Dent Mater 2010;26:1119-26.
  • Referans21. Türkün LŞ, Türkün M. Effect of bleaching and repolishing procedures on coffee and tea stain removal. J Esth Res Dent 2004;16:290-301.
  • Referans22. Marghalani HY. Effect of filler particles on surface roughness of experimental composite series. J Appl Oral Sci 2010;18:59-67.
  • Referans23. Cehreli ZC, Yazıcı R. Garcia-Godoy F. Effect of 1.23 percent APF gel on fluoride-releasing restorative materials. ASDC J Dent Child 2000;67:330-337.
  • Referans24. Çelik N, Sağsöz Ö, Gündoğdu M. Farklı içeceklerin posterior kompozitlerin renk değişikliği ve yüzey pürüzlülüğü üzerine etkisinin değerlendirilmesi. Atatürk Üniv. Diş Hek. Fak. Derg. 2017;27(1):27-33.
  • Referans25. Li H, Zou Y, Ding G. Dietary factors associated with dental erosion: a meta-analysis. PLoS One 2012;7(8):1-6.
  • Referans26. von Fraunhofer JA, Rogers MW. Dissolution of dental enamel in soft drinks. Gen Dent 2004;52(4):308-312.
  • Referans27. Karaman E, Tuncer D, Firat E, Ozdemir OS, Karahan S. Influence of Different Staining Beverages on Color Stability, Surface Roughness and Microhardness of Silorane and Methacrylate-based Composite Resins. J Contemp Dent Pract 2014;15(3):319-325.
  • Referans28. Kitchens M, Owens BM. Effect of carbonated beverages, coffee, sports and high energy drinks, and bottled water on the in vitro erosion characteristics of dental enamel. J Clin Ped Dentist 2007;31(3):153-159.
  • Referans29. Lussi A, Jaeggi T. Erosion—diagnosis and risk factors. Clin Oral Invest 2008;12:5-13.
  • Referans30. Isabel CAC, Domınguette AAS, Santos SG, Rıbeıro JCR, Moysés MR. Surface roughness of a resin composite. RGO- Revista Gaúcha de Odontologia 2016;64:50-5.
  • Referans31. Örtengren U, Wellendorf H, Karlsson S, Ruyter IE. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. J Oral Reh 2001;28:1106-1115.
  • Referans32. Turkun LS, Turkun M. The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials. Oper Dent 2004;29:203-11.
  • Referans33. Soderholm KJ. Degradation of glass filler in experimental composites. J Dent Res 1981; 11:1867-1875.
There are 32 citations in total.

Details

Primary Language Turkish
Subjects Dentistry
Journal Section Research
Authors

Suzan Cangül 0000-0002-1546-7688

Özkan Adıgüzel 0000-0001-6089-3013

Samet Tekin This is me 0000-0001-8883-8307

Faruk Öztekin This is me 0000-0002-5131-0063

Ömer Satıcı This is me 0000-0002-5491-8138

Publication Date August 1, 2020
Submission Date January 20, 2019
Published in Issue Year 2020 Volume: 7 Issue: 2

Cite

Vancouver Cangül S, Adıgüzel Ö, Tekin S, Öztekin F, Satıcı Ö. Ph Değerleri Farklı Kahve Türlerinde Bekletilen Kompozit Rezinlerin Yüzey Pürüzlülüğünün Değerlendirilmesi. Selcuk Dent J. 2020;7(2):252-8.