Research Article
BibTex RIS Cite

OFİS TİPİ BEYAZLATMANIN FARKLI KOMPOZİT REZİNLERİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNE ETKİSİ

Year 2022, Volume: 25 Issue: Supplement, 78 - 82, 25.03.2022
https://doi.org/10.7126/cumudj.1030957

Abstract

ÖZET
AMAÇ: Bu in vitro çalışmanın amacı, bir office bleaching ajanının bir mikrohibrit ve üç farklı nanohibrit kompozit rezinin yüzey pürüzlülüğüne etkilerinin değerlendirilmesidir.
YÖNTEM: Bu amaç için, teflon kalıplar yardımıyla disk şeklinde her bir kompozit grubu için n=6 olmak üzere toplam 24 adet kompozit örnek hazırlandı (10 x 2 mm). Örnekler teflon kalıplara alt ve üst yüzeylerinde şeffaf bant olacak şekilde 2mm'lik iki tabaka halinde yerleştirildi. Daha sonra 1mm kalınlığındaki cam plakalar arasında parmak basıncıyla sıkıştırıldı. Örneklerin polimerizasyonu için ışık cihazının ucu direkt olarak şeffaf bant yüzeyinden uygulandı. Her tabakada LED ışık cihazı kullanılarak örneklerin polimerizasyonu gerçekleştirildi. Örnekler, bitirme diskleriyle cilalandıktan sonra 37 °C da 24 saat distile su ortamında bekletildi. Tüm örneklerin yüzey pürüzlülüğü değerleri (Ra) profilometre cihazıyla ölçüldü. İlk ölçümlerden sonra yüzeylere % 35 hidrojen peroksit içeren beyazlatıcı ajan uygulandı ve bu işlem sonrası yüzey pürüzlülük ölçümleri tekrarlandı. Çalışmamızdan elde edilen veriler parametrik test varsayımlar yerine getirildiğinden (Kolmogorov –Simirnov), varyans analizi (ANOVA) ve Tukey testleri kullanılarak istatistiksel olarak analiz edildi.
BULGULAR: Profilometrik değerlendirmeler, beyazlatma ajanı uygulanan tüm örneklerin yüzey pürüzlülüğünde küçük bir artış olduğunu göstermiştir. Gruplara başlangıç ve tedavi sonrası ölçümleri karşılaştırıldığında ölçümler arası farklılık istatistiksel olarak önemsiz bulundu (p>0,05).
SONUÇ: %35 Hidrojen peroksit içeren ofis tipi beyazlatma ajanı, nanohibrit ve mikrohibrit yapıdaki kompozit rezinlerin yüzeylerinde pürüzlülük bakımından fark olusturmamıstır.

References

  • 1. Polydorou O, Hellwig E, Auschill T. The effect of different bleaching agents on the surface texture of restorative materials. Oper Dent. 2006;31:473-480.
  • 2. Van Ende A, De Munck J, Mine A, Lambrechts P, Van Meerbeek B. Does a low-shrinking composite induce less stress at the adhesive interface? Dent Mater. 2010;26:215-222.
  • 3. Albers HF. Tooth-colored restoratives: principles and techniques: PMPH-USA; 2002.
  • 4. Burgess J, Walker R, Davidson J. Posterior resin-based composite: review of the literature. Pediatr Dent. 2002;24:465-479.
  • 5. Swift EJ. Nanocomposites. J Esthet Restor Dent. 2005;17:3-4.
  • 6. Arısu HD, Kıvanç BH, Okay TC, Üçtaşlı MB, Görgül G. İki farklı ağartma aktivasyon sisteminin rezin restoratif materyallerin mikrosertliği üzerine etkisi. Acta Odontol Turc. 2010;27:99.
  • 7. Barutcugil Ç, Kürklü D, Barutcugil K, Harorlı OT. BEYAZLATICI AĞIZ GARGARALARININ KOMPOZİT REZİNİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNE ETKİLERİNİN İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2014;24.
  • 8. Kim J-H, Lee Y-K, Lim B-S, Rhee S-H, Yang H-C. Effect of tooth-whitening strips and films on changes in color and surface roughness of resin composites. Clin Oral Investig. 2004;8:118-122.
  • 9. Dutra RA, Branco JR, Alvim HH, Poletto LT, Albuquerque RC. Effect of hydrogen peroxide topical application on the enamel and composite resin surfaces and interface. Indian J Dent Res. 2009;20:65.
  • 10. Mor C, Steinberg D, Dogan H, Rotstein I. Bacterial adherence to bleached surfaces of composite resin in vitro. Oral Surg, Oral Med, Oral Pathol, Oral Radiol, Endod. 1998;86:582-586.
  • 11. Steinberg D, Mor C, Dogan H, Zacks B, Rotstein I. Effect of salivary biofilm on the adherence of oral bacteria to bleached and non-bleached restorative material. Dent Mater. 1999;15:14-20.
  • 12. Cavalli V, Arrais C, Giannini M, Ambrosano G. High‐concentrated carbamide peroxide bleaching agents effects on enamel surface. J Oral Rehabil. 2004;31:155-159.
  • 13. Bollenl CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13:258-269.
  • 14. Attin T, Hannig C, Wiegand A, Attin R. Effect of bleaching on restorative materials and restorations—a systematic review. Dent Mater. 2004;20:852-861.
  • 15. Duschner H, Götz H, White DJ, Kozak KM, Zoladz JR. Effects of hydrogen peroxide bleaching strip gels on dental restorative materials in vitro: surface microhardness and surface morphology. J Clin Dent. 2004;15:105-111.
  • 16. Langsten RE, Dunn WJ, Hartup GR, Murchison DF. Higher‐concentration carbamide peroxide effects on surface roughness of composites. J Esthet Restor Dent. 2002;14:92-96.
  • 17. Silikas N, Watts D, England K, Jandt K. Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM). J Dent. 1999;27:137-144.
  • 18. Rosentritt M, Lang R, Plein T, Behr M, Handel G. Discoloration of restorative materials after bleaching application. Quintessence international. 2005;36.
  • 19. Atali PY, Buuml F. The effect of different bleaching methods on the surface roughness and hardness of resin composites. J Dent Oral Hyg. 2011;3:10-17.
  • 20. Hafez R, Ahmed D, Yousry M, El-Badrawy W, El-Mowafy O. Effect of in-office bleaching on color and surface roughness of composite restoratives. Eur J Dent. 2010;4:118.
  • 21. Silva MdA, Davies R, Stewart B, et al. Effect of whitening gels on the surface roughness of restorative materials in situ. Dent Mater. 2006;22:919-924.
  • 22. Wattanapayungkul P, Yap A. Effects of in-office bleaching products on surface finish of tooth-colored restorations. Oper Dent. 2003;28:15-19.
  • 23. Sharafeddin F, Jamalipour G. Effects of 35% carbamide peroxide gel on surface roughness and hardness of composite resins. J Dent (Tehran, Iran). 2010;7:6.
  • 24. Yap A, Wattanapayungkul P, Chung S. Influence of the polymerization process on composite resistance to chemical degradation by food-simulating liquids. Oper Dent. 2003;28:723-727.
  • 25. Dogan A, Ozcelik S, Dogan OM, Hubbezoglu I, Cakmak M, Bolayir G. Effect of bleaching on roughness of dental composite resins. J Adhes. 2008;84:897-914.
  • 26. Wilder Jr A, Swift Jr E, May Jr K, Thompson J, McDougal R. Effect of finishing technique on the microleakage and surface texture of resin-modified glass ionomer restorative materials. J Dent. 2000;28:367-373.
  • 27. Correr GM, Alonso RCB, Sobrinho LC, Puppin‐Rontani RM, Ferracane JL. In vitro wear of resin‐based materials—Simultaneous corrosive and abrasive wear. Journal of Biomedical Materials Research Part B: Applied Biomaterials: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials. 2006;78:105-114.
  • 28. Turssi CP, Ferracane JL, Ferracane LL. Wear and fatigue behavior of nano‐structured dental resin composites. Journal of Biomedical Materials Research Part B: Applied Biomaterials: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials. 2006;78:196-203.
  • 29. Chng H, Ramli H, Yap A, Lim C. Effect of hydrogen peroxide on intertubular dentine. J Dent. 2005;33:363-369.
  • 30. Park H-J, Kwon T-Y, Nam S-H, Kim H-J, Kim K-H, Kim Y-J. Changes in bovine enamel after treatment with a 30% hydrogen peroxide bleaching agent. Dent Mater J. 2004;23:517-521.
  • 31. Turker ŞB, Biskin T. Effect of three bleaching agents on the surface properties of three different esthetic restorative materials. J Prosthet Dent. 2003;89:466-473.
  • 32. Yu H, Zhang Cy, Wang Yn, Cheng H. Hydrogen peroxide bleaching induces changes in the physical properties of dental restorative materials: Effects of study protocols. J Esthet Restor Dent. 2018;30:E52-E60.
  • 33. Mourouzis P, Koulaouzidou EA, Helvatjoglu-Antoniades M. Effect of in-office bleaching agents on physical properties of dental composite resins. Quintessence International. 2013;44.
  • 34. Polydorou O, Hellwig E, Auschill TM. The effect of different bleaching agents on the surface texture of restorative materials. Oper Dent. 2006;31:473-480.
  • 35. Soderholm K-J. Leaking of fillers in dental composites. J Dent Res. 1983;62:126-130.
  • 36. Kalachandra S. Influence of fillers on the water sorption of composites. Dent Mater. 1989;5:283-288.
  • 37. Varanda E, Do Prado M, Simão RA, Dias KRHC. Effect of in‐office bleaching agents on the surface roughness and morphology of different dental composites: An AFM study. Micros Res Tech. 2013;76:481-485.
  • 38. Rodrigues CS, Mozzaquatro LR, Dala Nora B, Jacques LB, Mallmann A. Effect of bleaching on color stability and roughness of composite resins aged in staining beverage. General dentistry. 2017;65:e5-e10.
  • 39. Fernandes RA, Strazzi-Sahyon HB, Suzuki TYU, Briso ALF, dos Santos PH. Effect of dental bleaching on the microhardness and surface roughness of sealed composite resins. Restor Dent Endod. 2020;45.
  • 40. Waly GH, El Sharkawy F. Hydrogen peroxide bleaching: effects on surface roughness, color and staining susceptibility of microhybrid and nanocomposite. J Am Sci. 2012;8:190-199.

EFFECT OF İN-OFFİCE BLEACHİNG ON THE SURFACE ROUGHNESS OF DİFFERENT COMPOSİTE RESİNS

Year 2022, Volume: 25 Issue: Supplement, 78 - 82, 25.03.2022
https://doi.org/10.7126/cumudj.1030957

Abstract

Objective: The aim of this study is to investigate the effect of a high concentration hydrogen peroxide bleaching agent on the surface roughness of four different composite resins.
Material and Methods: For this purpose, with the help of teflon molds, a total of 24 composite samples (10 x 2 mm) were prepared, with n = 6 for each composite group. The samples were placed in teflon molds in two layers of 2mm and covered by transparent mylar strips at the top and bottom surfaces. The material was compressed with finger pressure between 1mm thick glass plates. The tip of the light device was applied directly from the transparent tape surface for the polymerization of the samples. Polymerization of the samples was carried out using LED light device in each layer. After the samples were polished with finishing discs, they were kept at 37 ° C for 24 hours in the distilled water. Surface roughness values (Ra) of all samples were measured with a profilometer device. After the first measurements, a whitening agent containing 35% hydrogen peroxide was applied to the surfaces, and surface roughness measurements were repeated after this process. Data were analyzed statistically using analysis of variance (ANOVA) and Tukey tests.
Results: Profilometric evaluations showed a small increase in the surface roughness of all samples with a bleaching agent. When the initial and treated measurements of the groups were compared, the difference between the measurements was found statistically insignificant. (P> 0.05)
Conclusion: The office bleaching agent containing 35% hydrogen peroxide did not make any difference in the roughness of the nanohybrid and microhybrid composite resins.

References

  • 1. Polydorou O, Hellwig E, Auschill T. The effect of different bleaching agents on the surface texture of restorative materials. Oper Dent. 2006;31:473-480.
  • 2. Van Ende A, De Munck J, Mine A, Lambrechts P, Van Meerbeek B. Does a low-shrinking composite induce less stress at the adhesive interface? Dent Mater. 2010;26:215-222.
  • 3. Albers HF. Tooth-colored restoratives: principles and techniques: PMPH-USA; 2002.
  • 4. Burgess J, Walker R, Davidson J. Posterior resin-based composite: review of the literature. Pediatr Dent. 2002;24:465-479.
  • 5. Swift EJ. Nanocomposites. J Esthet Restor Dent. 2005;17:3-4.
  • 6. Arısu HD, Kıvanç BH, Okay TC, Üçtaşlı MB, Görgül G. İki farklı ağartma aktivasyon sisteminin rezin restoratif materyallerin mikrosertliği üzerine etkisi. Acta Odontol Turc. 2010;27:99.
  • 7. Barutcugil Ç, Kürklü D, Barutcugil K, Harorlı OT. BEYAZLATICI AĞIZ GARGARALARININ KOMPOZİT REZİNİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNE ETKİLERİNİN İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2014;24.
  • 8. Kim J-H, Lee Y-K, Lim B-S, Rhee S-H, Yang H-C. Effect of tooth-whitening strips and films on changes in color and surface roughness of resin composites. Clin Oral Investig. 2004;8:118-122.
  • 9. Dutra RA, Branco JR, Alvim HH, Poletto LT, Albuquerque RC. Effect of hydrogen peroxide topical application on the enamel and composite resin surfaces and interface. Indian J Dent Res. 2009;20:65.
  • 10. Mor C, Steinberg D, Dogan H, Rotstein I. Bacterial adherence to bleached surfaces of composite resin in vitro. Oral Surg, Oral Med, Oral Pathol, Oral Radiol, Endod. 1998;86:582-586.
  • 11. Steinberg D, Mor C, Dogan H, Zacks B, Rotstein I. Effect of salivary biofilm on the adherence of oral bacteria to bleached and non-bleached restorative material. Dent Mater. 1999;15:14-20.
  • 12. Cavalli V, Arrais C, Giannini M, Ambrosano G. High‐concentrated carbamide peroxide bleaching agents effects on enamel surface. J Oral Rehabil. 2004;31:155-159.
  • 13. Bollenl CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13:258-269.
  • 14. Attin T, Hannig C, Wiegand A, Attin R. Effect of bleaching on restorative materials and restorations—a systematic review. Dent Mater. 2004;20:852-861.
  • 15. Duschner H, Götz H, White DJ, Kozak KM, Zoladz JR. Effects of hydrogen peroxide bleaching strip gels on dental restorative materials in vitro: surface microhardness and surface morphology. J Clin Dent. 2004;15:105-111.
  • 16. Langsten RE, Dunn WJ, Hartup GR, Murchison DF. Higher‐concentration carbamide peroxide effects on surface roughness of composites. J Esthet Restor Dent. 2002;14:92-96.
  • 17. Silikas N, Watts D, England K, Jandt K. Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM). J Dent. 1999;27:137-144.
  • 18. Rosentritt M, Lang R, Plein T, Behr M, Handel G. Discoloration of restorative materials after bleaching application. Quintessence international. 2005;36.
  • 19. Atali PY, Buuml F. The effect of different bleaching methods on the surface roughness and hardness of resin composites. J Dent Oral Hyg. 2011;3:10-17.
  • 20. Hafez R, Ahmed D, Yousry M, El-Badrawy W, El-Mowafy O. Effect of in-office bleaching on color and surface roughness of composite restoratives. Eur J Dent. 2010;4:118.
  • 21. Silva MdA, Davies R, Stewart B, et al. Effect of whitening gels on the surface roughness of restorative materials in situ. Dent Mater. 2006;22:919-924.
  • 22. Wattanapayungkul P, Yap A. Effects of in-office bleaching products on surface finish of tooth-colored restorations. Oper Dent. 2003;28:15-19.
  • 23. Sharafeddin F, Jamalipour G. Effects of 35% carbamide peroxide gel on surface roughness and hardness of composite resins. J Dent (Tehran, Iran). 2010;7:6.
  • 24. Yap A, Wattanapayungkul P, Chung S. Influence of the polymerization process on composite resistance to chemical degradation by food-simulating liquids. Oper Dent. 2003;28:723-727.
  • 25. Dogan A, Ozcelik S, Dogan OM, Hubbezoglu I, Cakmak M, Bolayir G. Effect of bleaching on roughness of dental composite resins. J Adhes. 2008;84:897-914.
  • 26. Wilder Jr A, Swift Jr E, May Jr K, Thompson J, McDougal R. Effect of finishing technique on the microleakage and surface texture of resin-modified glass ionomer restorative materials. J Dent. 2000;28:367-373.
  • 27. Correr GM, Alonso RCB, Sobrinho LC, Puppin‐Rontani RM, Ferracane JL. In vitro wear of resin‐based materials—Simultaneous corrosive and abrasive wear. Journal of Biomedical Materials Research Part B: Applied Biomaterials: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials. 2006;78:105-114.
  • 28. Turssi CP, Ferracane JL, Ferracane LL. Wear and fatigue behavior of nano‐structured dental resin composites. Journal of Biomedical Materials Research Part B: Applied Biomaterials: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials. 2006;78:196-203.
  • 29. Chng H, Ramli H, Yap A, Lim C. Effect of hydrogen peroxide on intertubular dentine. J Dent. 2005;33:363-369.
  • 30. Park H-J, Kwon T-Y, Nam S-H, Kim H-J, Kim K-H, Kim Y-J. Changes in bovine enamel after treatment with a 30% hydrogen peroxide bleaching agent. Dent Mater J. 2004;23:517-521.
  • 31. Turker ŞB, Biskin T. Effect of three bleaching agents on the surface properties of three different esthetic restorative materials. J Prosthet Dent. 2003;89:466-473.
  • 32. Yu H, Zhang Cy, Wang Yn, Cheng H. Hydrogen peroxide bleaching induces changes in the physical properties of dental restorative materials: Effects of study protocols. J Esthet Restor Dent. 2018;30:E52-E60.
  • 33. Mourouzis P, Koulaouzidou EA, Helvatjoglu-Antoniades M. Effect of in-office bleaching agents on physical properties of dental composite resins. Quintessence International. 2013;44.
  • 34. Polydorou O, Hellwig E, Auschill TM. The effect of different bleaching agents on the surface texture of restorative materials. Oper Dent. 2006;31:473-480.
  • 35. Soderholm K-J. Leaking of fillers in dental composites. J Dent Res. 1983;62:126-130.
  • 36. Kalachandra S. Influence of fillers on the water sorption of composites. Dent Mater. 1989;5:283-288.
  • 37. Varanda E, Do Prado M, Simão RA, Dias KRHC. Effect of in‐office bleaching agents on the surface roughness and morphology of different dental composites: An AFM study. Micros Res Tech. 2013;76:481-485.
  • 38. Rodrigues CS, Mozzaquatro LR, Dala Nora B, Jacques LB, Mallmann A. Effect of bleaching on color stability and roughness of composite resins aged in staining beverage. General dentistry. 2017;65:e5-e10.
  • 39. Fernandes RA, Strazzi-Sahyon HB, Suzuki TYU, Briso ALF, dos Santos PH. Effect of dental bleaching on the microhardness and surface roughness of sealed composite resins. Restor Dent Endod. 2020;45.
  • 40. Waly GH, El Sharkawy F. Hydrogen peroxide bleaching: effects on surface roughness, color and staining susceptibility of microhybrid and nanocomposite. J Am Sci. 2012;8:190-199.
There are 40 citations in total.

Details

Primary Language English
Subjects Health Care Administration
Journal Section Original Research Articles
Authors

Seher Kaya 0000-0003-2601-3064

Ozden Ozel Bektas 0000-0003-1321-2056

Publication Date March 25, 2022
Submission Date December 1, 2021
Published in Issue Year 2022Volume: 25 Issue: Supplement

Cite

EndNote Kaya S, Ozel Bektas O (March 1, 2022) EFFECT OF İN-OFFİCE BLEACHİNG ON THE SURFACE ROUGHNESS OF DİFFERENT COMPOSİTE RESİNS. Cumhuriyet Dental Journal 25 Supplement 78–82.

Cumhuriyet Dental Journal (Cumhuriyet Dent J, CDJ) is the official publication of Cumhuriyet University Faculty of Dentistry. CDJ is an international journal dedicated to the latest advancement of dentistry. The aim of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of dentistry. First issue of the Journal of Cumhuriyet University Faculty of Dentistry was published in 1998. In 2010, journal's name was changed as Cumhuriyet Dental Journal. Journal’s publication language is English.


CDJ accepts articles in English. Submitting a paper to CDJ is free of charges. In addition, CDJ has not have article processing charges.

Frequency: Four times a year (March, June, September, and December)

IMPORTANT NOTICE

All users of Cumhuriyet Dental Journal should visit to their user's home page through the "https://dergipark.org.tr/tr/user" " or "https://dergipark.org.tr/en/user" links to update their incomplete information shown in blue or yellow warnings and update their e-mail addresses and information to the DergiPark system. Otherwise, the e-mails from the journal will not be seen or fall into the SPAM folder. Please fill in all missing part in the relevant field.

Please visit journal's AUTHOR GUIDELINE to see revised policy and submission rules to be held since 2020.