Research Article
BibTex RIS Cite

All-On-Four Konseptine Göre Farkli Materyaller İle Üretilmiş Sabit Dental Protezlerin Stres Analizleri

Year 2019, Volume: 3 Issue: 3, 183 - 191, 31.12.2019
https://doi.org/10.34084/bshr.647860

Abstract

Amaç: İmplant destekli
sistemlerin protez tesliminden sonra uzun vadeli başarısını etkileyen en önemli
faktör biyomekaniktir. Bu çalışmanın amacı, atrofik mandibulada All-On-4
tekniğine göre yerleştirilen implantlarla farklı alt yapı materyalleri
kullanılarak tasarlanan protez restorasyonlarını farklı stres analiz yöntemleri
ile incelemek ve yöntemleri karşılaştırmaktı.



Yöntem: Bu amaçla,
All-On-4 konseptine göre foto-elastik bir rezin model hazırlandı. Ölçü
alındıktan sonra, fiberle güçlendirilmiş rezin, PEEK, zirkonya ve metal alt
yapılar Cad / Cam ile üretildi. Foto elastik stres analizi yapıldı. Öte yandan,
aynı alt yapıların 3 boyutlu sanal modelleri, CAD'in .stl verileriyle
oluşturuldu. Daha sonra aynı koşullar altında sonlu elemanlar stres analizi
uygulanmıştır.



Bulgular: Fotoelastik ve sonlu
elemanlar stres analizinde metal ve zirkonya gibi sert alt yapılar PEEK ve
fiber gibi elastik materyallere göre daha düşük stres değerleri göstermiştir.
Sonlu elemanlar analizi  imkanlarıyla alt
yapıların iç gerilmeleri değerlendirildi. Düşük elastik modüllü fiber ve PEEK
altyapılarında düşük gerilimler gözlendi.



Sonuç: Altyapının
elastikiyet modülü arttığında implantlara iletilen stresler azalmaktadır. Malzemelerin
iç gerilmeleri değerlendirildiğinde, düşük elastik modüllü, fiber ve PEEK gibi
altyapılarda düşük gerilmeler görülmektedir. Fotoelastik ve sonlu elemanlar stres analizleri implant ve çevre
dokularda benzer stres sonuçları vermiştir. Yani sonuçlar birbirini
desteklemiştir.

Supporting Institution

Selçuk Üniversitesi

Project Number

18202053

References

  • Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications with implants and implant prostheses. J Prosthet Dent. 2003;90(2):121-132.
  • Ayna M, Gulses A, Acil Y. Comprehensive Comparison of the 5-Year Results of All-on-4 Mandibular Implant Systems With Acrylic and Ceramic Suprastructures. J Oral Implantol. 2015;41(6):675-683.
  • Bellini CM, Romeo D, Galbusera F, et al. Comparison of tilted versus nontilted implant-supported prosthetic designs for the restoration of the edentuous mandible: a biomechanical study. Int J Oral Maxillofac Implants. 2009;24(3):511-517
  • Malo P, Rangert B, Nobre M. "All-on-Four" immediate-function concept with Branemark System implants for completely edentulous mandibles: a retrospective clinical study. Clin Implant Dent Relat Res. 2003;5 Suppl 1:2-9.
  • Babbush CA, Kutsko GT, Brokloff J. The all-on-four immediate function treatment concept with NobelActive implants: a retrospective study. J Oral Implantol. 2011;37(4):431-445.
  • Crespi R, Vinci R, Cappare P, Romanos GE, Gherlone E. A clinical study of edentulous patients rehabilitated according to the "all on four" immediate function protocol. Int J Oral Maxillofac Implants. 2012;27(2):428-434.
  • Agliardi E, Panigatti S, Clerico M, Villa C, Malo P. Immediate rehabilitation of the edentulous jaws with full fixed prostheses supported by four implants: interim results of a single cohort prospective study. Clin Oral Implants Res. 2010;21(5):459-465.
  • Browaeys H, Dierens M, Ruyffelaert C, Matthijs C, De Bruyn H, Vandeweghe S. Ongoing Crestal Bone Loss around Implants Subjected to Computer-Guided Flapless Surgery and Immediate Loading Using the All-on-4(R) Concept. Clin Implant Dent Relat Res. 2015;17(5):831-843.
  • Heydecke G, Zwahlen M, Nicol A, et al. What is the optimal number of implants for fixed reconstructions: a systematic review. Clin Oral Implants Res. 2012;23 Suppl 6:217-228.
  • Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol. 1997;23(3):104-111.
  • Çiftçi Y, Canay Ş. Stress Distribution on the Metal Framework of the Implant-Supported Fixed Prosthesis Using Different Veneering Materials. International Journal of Prosthodontics. 2001;14(5):406-411.
  • Carter DR, Van Der Meulen MC, Beaupre GS. Mechanical factors in bone growth and development. Bone. 1996;18(1 Suppl):5S-10S.
  • 3 - PHOTOELASTIC STUDIES IN STRESS CONCENTRATION: FILLETS, HOLES, AND GROOVES IN TENSION, COMPRESSION, AND BENDING. In: Leven MM, Frocht MM, eds. Photoelasticity. Pergamon; 1969:65-75.
  • Cehreli M, Duyck J, De Cooman M, Puers R, Naert I. Implant design and interface force transfer. A photoelastic and strain-gauge analysis. Clin Oral Implants Res. 2004;15(2):249-257.Caputo AAaS, J.P. Biomechanics in clinical dentistry. Quintessence Publishing Co, Inc, Chicago, . 1987:123-149.
  • Viecilli AF, Freitas MPM. The T-loop in details. Dental press journal of orthodontics. 2018;23(1):108-117.
  • Mahler DB, Peyton FA. Photoelasticity as a research technique for analyzing stresses in dental structures. J Dent Res. 1955;34(6):831-838.
  • Menicucci G, Lorenzetti M, Pera P, Preti G. Mandibular implant-retained overdenture: finite element analysis of two anchorage systems. Int J Oral Maxillofac Implants. 1998;13(3):369-376.
  • Duyck J, Ronold HJ, Van Oosterwyck H, Naert I, Vander Sloten J, Ellingsen JE. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Implants Res. 2001;12(3):207-218.
  • Wyatt CC, Zarb GA. Bone level changes proximal to oral implants supporting fixed partial prostheses. Clin Oral Implants Res. 2002;13(2):162-168.
  • Baron M, Haas R, Baron W, Mailath-Pokorny G. Peri-implant bone loss as a function of tooth-implant distance. Int J Prosthodont. 2005;18(5):427-433.Zaparolli D, Peixoto RF, Pupim D, Macedo AP, Toniollo MB, Mattos M. Photoelastic analysis of mandibular full-arch implant-supported fixed dentures made with different bar materials and manufacturing techniques. Mater Sci Eng C Mater Biol Appl. 2017;81:144-147.
  • Morneburg TR, Proschel PA. Measurement of masticatory forces and implant loads: a methodologic clinical study. Int J Prosthodont. 2002;15(1):20-27.
  • Cosme DC, Baldisserotto SM, Canabarro Sde A, Shinkai RS. Bruxism and voluntary maximal bite force in young dentate adults. Int J Prosthodont. 2005;18(4):328-332.
  • Muller F, Hernandez M, Grutter L, Aracil-Kessler L, Weingart D, Schimmel M. Masseter muscle thickness, chewing efficiency and bite force in edentulous patients with fixed and removable implant-supported prostheses: a cross-sectional multicenter study. Clin Oral Implants Res. 2012;23(2):144-150.
  • Rubo JH, Souza EA. Finite element analysis of stress in bone adjacent to dental implants. J Oral Implantol. 2008;34(5):248-255.
  • Williams KR, Watson CJ, Murphy WM, Scott J, Gregory M, Sinobad D. Finite element analysis of fixed prostheses attached to osseointegrated implants. Quintessence international (Berlin, Germany : 1985). 1990;21(7):563-570.
  • Cibirka RM, Razzoog ME, Lang BR, Stohler CS. Determining the force absorption quotient for restorative materials used in implant occlusal surfaces. The Journal of prosthetic dentistry. 1992;67(3):361-364.
  • Lee KS, Shin SW, Lee SP, Kim JE, Kim JH, Lee JY. Comparative Evaluation of a Four-Implant-Supported Polyetherketoneketone Framework Prosthesis: A Three-Dimensional Finite Element Analysis Based on Cone Beam Computed Tomography and Computer-Aided Design. Int J Prosthodont. 2017;30(6):581-585.
  • Akca K, Cehreli MC, Iplikcioglu H. A comparison of three-dimensional finite element stress analysis with in vitro strain gauge measurements on dental implants. Int J Prosthodont. 2002;15(2):115-121.
  • Inan Ö, Sevimay, M., Eraslan, O., Eskitaşçıoğlu, G. Comparison of Finite Element and Photoelastic Stress Analysis Methods. Turkiye Klinikleri J Dental Sci. 2009;15(2):93-101.

Stress Analysis Of Fixed Dental Prostheses Produced With Different Materials According To The All-On-Four Concept

Year 2019, Volume: 3 Issue: 3, 183 - 191, 31.12.2019
https://doi.org/10.34084/bshr.647860

Abstract

Objective: The most
important factor affecting the long-term success of implant supported systems
is biomechanics after prosthesis delivery.
The aim of this study was to investigate the prosthetic restorations
designed by using different substructure materials on the implants placed
according to All-On-4 technique in atrophic mandible with different stress
analysis methods and compare the methods each other.

Methods: For this
purpose, a photo-elastic resin model, according to All-On-4 concept was
prepared. After taking impression, fiber-reinforced resin, PEEK, zirconia and
metal substructures were manufactured with Cad/Cam. Photo elastic stress
analysis was performed.   On the other
hand 3D virtual models of the same substructures were formed with the .stl data
of the CAD. Then finite element stres analysis was applied at the same
circumstances.

Results: In the
photoelastic and finite element stres analysis, rigid substructures such as
metal and zirconia showed lower stres values than elastic materials such as
PEEK and fiber. As a facility of the finite element analysis internal stresses
of the substructures were evaluated. Lower stresses were observed in fiber and
PEEK infrastructures with low elastic modulus.







Conclusion: İncreased
modulus of elasticity of the infrastructure, reduced.stresses transmitted to
the implants When the internal stresses of the materials were evaluated, lower
stresses were seen in infrastructures such as fiber and PEEK with low elastic
modulus .Photoelastic and finite element stress analyzes gave similar stress
results to the implant and surrounding tissues. Therefore, the results
supported each other.

Project Number

18202053

References

  • Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications with implants and implant prostheses. J Prosthet Dent. 2003;90(2):121-132.
  • Ayna M, Gulses A, Acil Y. Comprehensive Comparison of the 5-Year Results of All-on-4 Mandibular Implant Systems With Acrylic and Ceramic Suprastructures. J Oral Implantol. 2015;41(6):675-683.
  • Bellini CM, Romeo D, Galbusera F, et al. Comparison of tilted versus nontilted implant-supported prosthetic designs for the restoration of the edentuous mandible: a biomechanical study. Int J Oral Maxillofac Implants. 2009;24(3):511-517
  • Malo P, Rangert B, Nobre M. "All-on-Four" immediate-function concept with Branemark System implants for completely edentulous mandibles: a retrospective clinical study. Clin Implant Dent Relat Res. 2003;5 Suppl 1:2-9.
  • Babbush CA, Kutsko GT, Brokloff J. The all-on-four immediate function treatment concept with NobelActive implants: a retrospective study. J Oral Implantol. 2011;37(4):431-445.
  • Crespi R, Vinci R, Cappare P, Romanos GE, Gherlone E. A clinical study of edentulous patients rehabilitated according to the "all on four" immediate function protocol. Int J Oral Maxillofac Implants. 2012;27(2):428-434.
  • Agliardi E, Panigatti S, Clerico M, Villa C, Malo P. Immediate rehabilitation of the edentulous jaws with full fixed prostheses supported by four implants: interim results of a single cohort prospective study. Clin Oral Implants Res. 2010;21(5):459-465.
  • Browaeys H, Dierens M, Ruyffelaert C, Matthijs C, De Bruyn H, Vandeweghe S. Ongoing Crestal Bone Loss around Implants Subjected to Computer-Guided Flapless Surgery and Immediate Loading Using the All-on-4(R) Concept. Clin Implant Dent Relat Res. 2015;17(5):831-843.
  • Heydecke G, Zwahlen M, Nicol A, et al. What is the optimal number of implants for fixed reconstructions: a systematic review. Clin Oral Implants Res. 2012;23 Suppl 6:217-228.
  • Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol. 1997;23(3):104-111.
  • Çiftçi Y, Canay Ş. Stress Distribution on the Metal Framework of the Implant-Supported Fixed Prosthesis Using Different Veneering Materials. International Journal of Prosthodontics. 2001;14(5):406-411.
  • Carter DR, Van Der Meulen MC, Beaupre GS. Mechanical factors in bone growth and development. Bone. 1996;18(1 Suppl):5S-10S.
  • 3 - PHOTOELASTIC STUDIES IN STRESS CONCENTRATION: FILLETS, HOLES, AND GROOVES IN TENSION, COMPRESSION, AND BENDING. In: Leven MM, Frocht MM, eds. Photoelasticity. Pergamon; 1969:65-75.
  • Cehreli M, Duyck J, De Cooman M, Puers R, Naert I. Implant design and interface force transfer. A photoelastic and strain-gauge analysis. Clin Oral Implants Res. 2004;15(2):249-257.Caputo AAaS, J.P. Biomechanics in clinical dentistry. Quintessence Publishing Co, Inc, Chicago, . 1987:123-149.
  • Viecilli AF, Freitas MPM. The T-loop in details. Dental press journal of orthodontics. 2018;23(1):108-117.
  • Mahler DB, Peyton FA. Photoelasticity as a research technique for analyzing stresses in dental structures. J Dent Res. 1955;34(6):831-838.
  • Menicucci G, Lorenzetti M, Pera P, Preti G. Mandibular implant-retained overdenture: finite element analysis of two anchorage systems. Int J Oral Maxillofac Implants. 1998;13(3):369-376.
  • Duyck J, Ronold HJ, Van Oosterwyck H, Naert I, Vander Sloten J, Ellingsen JE. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Implants Res. 2001;12(3):207-218.
  • Wyatt CC, Zarb GA. Bone level changes proximal to oral implants supporting fixed partial prostheses. Clin Oral Implants Res. 2002;13(2):162-168.
  • Baron M, Haas R, Baron W, Mailath-Pokorny G. Peri-implant bone loss as a function of tooth-implant distance. Int J Prosthodont. 2005;18(5):427-433.Zaparolli D, Peixoto RF, Pupim D, Macedo AP, Toniollo MB, Mattos M. Photoelastic analysis of mandibular full-arch implant-supported fixed dentures made with different bar materials and manufacturing techniques. Mater Sci Eng C Mater Biol Appl. 2017;81:144-147.
  • Morneburg TR, Proschel PA. Measurement of masticatory forces and implant loads: a methodologic clinical study. Int J Prosthodont. 2002;15(1):20-27.
  • Cosme DC, Baldisserotto SM, Canabarro Sde A, Shinkai RS. Bruxism and voluntary maximal bite force in young dentate adults. Int J Prosthodont. 2005;18(4):328-332.
  • Muller F, Hernandez M, Grutter L, Aracil-Kessler L, Weingart D, Schimmel M. Masseter muscle thickness, chewing efficiency and bite force in edentulous patients with fixed and removable implant-supported prostheses: a cross-sectional multicenter study. Clin Oral Implants Res. 2012;23(2):144-150.
  • Rubo JH, Souza EA. Finite element analysis of stress in bone adjacent to dental implants. J Oral Implantol. 2008;34(5):248-255.
  • Williams KR, Watson CJ, Murphy WM, Scott J, Gregory M, Sinobad D. Finite element analysis of fixed prostheses attached to osseointegrated implants. Quintessence international (Berlin, Germany : 1985). 1990;21(7):563-570.
  • Cibirka RM, Razzoog ME, Lang BR, Stohler CS. Determining the force absorption quotient for restorative materials used in implant occlusal surfaces. The Journal of prosthetic dentistry. 1992;67(3):361-364.
  • Lee KS, Shin SW, Lee SP, Kim JE, Kim JH, Lee JY. Comparative Evaluation of a Four-Implant-Supported Polyetherketoneketone Framework Prosthesis: A Three-Dimensional Finite Element Analysis Based on Cone Beam Computed Tomography and Computer-Aided Design. Int J Prosthodont. 2017;30(6):581-585.
  • Akca K, Cehreli MC, Iplikcioglu H. A comparison of three-dimensional finite element stress analysis with in vitro strain gauge measurements on dental implants. Int J Prosthodont. 2002;15(2):115-121.
  • Inan Ö, Sevimay, M., Eraslan, O., Eskitaşçıoğlu, G. Comparison of Finite Element and Photoelastic Stress Analysis Methods. Turkiye Klinikleri J Dental Sci. 2009;15(2):93-101.
There are 29 citations in total.

Details

Primary Language English
Subjects Dentistry
Journal Section Research Article
Authors

Ahmet Çalışkan 0000-0002-8424-5886

İsa Yöndem 0000-0001-9608-7830

Project Number 18202053
Publication Date December 31, 2019
Acceptance Date November 28, 2019
Published in Issue Year 2019 Volume: 3 Issue: 3

Cite

AMA Çalışkan A, Yöndem İ. Stress Analysis Of Fixed Dental Prostheses Produced With Different Materials According To The All-On-Four Concept. J Biotechnol and Strategic Health Res. December 2019;3(3):183-191. doi:10.34084/bshr.647860
  • Dergimiz Uluslararası hakemli bir dergi olup TÜRKİYE ATIF DİZİNİ, TürkMedline, CrossREF, ASOS index, Google Scholar, JournalTOCs, Eurasian Scientific Journal Index(ESJI), SOBIAD ve ISIindexing dizinlerinde taranmaktadır. TR Dizin(ULAKBİM), SCOPUS, DOAJ için başvurularımızın sonuçlanması beklenmektedir.